Important compatibility info
Filter type | In-Line Filter |
Function | Filter, venting (fuel tank) |
Weight | 0.045 kg |
Length | 156 mm |
Outer diameter | 47.5 mm |
Pipe Diameter | 6 mm |
Type | Filter, venting (fuel tank) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Sensor, switch module |
Weight | 0.063 kg |
Type | Sensor, switch module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
Min. Length | 867 mm |
Function | Drive Shaft |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 23 |
Weight | 7.934 kg |
External Teeth, Diff.Side | 26 |
ABS Ring Diameter | 85 mm |
Wheel Sided Joint Diameter | 83 mm |
Transmission-side joint diameter | 80 mm |
Type | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Grey Cast Iron |
Number of Wings | 12 |
Function | Water Pump, engine cooling |
Weight | 7.8 kg |
Material | Grey Cast Iron |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
for OE number | 51.06500.6537 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 508 mm |
Function | Fan, engine cooling |
Weight | 3.7 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Function | Mounting, manual transmission |
Weight | 1.475 kg |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Spanner Size | 27 |
Number of Connectors / Ports | 2 |
Function | Switch, reverse light |
External Thread Size | M18 x 1,5 |
Type | Switch, reverse light |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.060 kg |
Cable Length | 550 mm |
Type | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.018 kg |
Length | 47 mm |
Material | Plastic |
Spanner Size | 10 |
Bolt Head/Nut Design | Inner rectangle |
Extra Description | febi Plus |
Additional Information 2 | with seal ring |
Surface | Blank |
Thread Length | 21 mm |
Type | Screw Plug, oil sump |
Function | Screw Plug, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.054 kg |
Material | Rubber |
Function | Holder, battery compartment cover |
Type | Holder, battery compartment cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023