Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Starter |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Voltage | 12 V |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.89
Important compatibility info
| Function | Cable Pull, manual transmission |
| Outer Length | 3371 mm |
| Inner Length | 2940 mm |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.89
Important compatibility info
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 37 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Width | 25.4 mm |
| Number of Teeth | 137 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (09757)
- 1x Febi Timing Belt Kit (14626)
£91.87
Important compatibility info
| Function | Timing Belt Kit |
| Width | 25 mm |
| Number of Teeth | 145 |
| for OE number | 04L 109 119 D S8 |
| Type | Timing Belt Kit |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (178943)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
£91.87
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 865 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Housing material | Aluminium |
| Number of grooves | 8 |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Outer diameter | 80 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Housing Colour | black |
| Function | Ignition Coil |
| Number of Connectors / Ports | 2 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 194 |
| Timing Chain Size | D67HP |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Function | Repair Kit, kingpin |
| Outer diameter | 28 mm. 35 mm |
| Length | 178 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Rod/Strut | Push Rod |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Outer diameter | 48 mm |
| Length | 573 mm |
| Placement on Vehicle | Rear Axle Left, Lower, Front Axle, Rear Axle Right |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 263.9 mm |
| Width | 147.2 mm |
| Thickness | 124 mm |
| Paired article numbers | 27576 |
| Function | Bush, parabolic spring |
| Type | Bush, parabolic spring |
| Hole Spacing | 178.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 263.9 mm |
| Width | 147.2 mm |
| Thickness | 124 mm |
| Paired article numbers | 27575 |
| Function | Bush, parabolic spring |
| Hole Spacing | 178.9 mm |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Number of Connectors / Ports | 2 |
| Opening Temperature | 83 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Paired article numbers | 39944 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39943 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Number of Teeth | 10 |
| Type | Clutch Disc |
| Function | Clutch Disc |
| Outer diameter | 380 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Outer diameter | 350 mm |
| Number of Teeth | 10 |
| for OE number | 81.30301.0280 |
| Type | Clutch Disc |
| Function | Clutch Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Housing length | 153 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 85 mm |
| Eject Force | 500 N |
| Housing Diameter | 20 mm |
| Length | 270 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Eject Force | 860 N |
| Length | 505 mm |
| Placement on Vehicle | both sides |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Housing Diameter | 22 mm |
| Housing length | 343.5 mm |
| Stroke | 131 mm |
| Mounting points diameter | 15 mm |
| Piston conrod diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Outer length 1 | 1240 mm |
| Inner length 1 | 890 mm |
| Inner length 2 | 905 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 1120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 30 mm |
| Material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
| Outer diameter | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Extra Description | ProKit |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Additional Information | with lock nut |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Paired article numbers | 183726 |
| Cone Size | 19 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Transmission-side joint diameter | 85.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 105 mm |
| Min. Length | 638 mm |
| External Teeth, Diff.Side | 37 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 38 |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Additional Information 2 | with nut |
| Additional Information | with axle nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 183822 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 560 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 88.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Internal Thread Size | M12 x 1,5 |
| Function | Pressure Limiting Valve |
| Inlet pressure from | 8 bar |
| Type | Pressure Limiting Valve |
| Opening Pressure | 0.3 bar |
| Inner thread 1 | M12 x 1,5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Length | 900 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M20 x 1,5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023