Proud to be a UK-based company
Contact us
Important compatibility info
| Inner length 1 | 1035 mm |
| Inner length 2 | 1093 mm |
| Driver Position | for right-hand drive vehicles |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1374 mm |
| Outer length 2 | 1287 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.35
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Min. Length | 608 mm |
| Number of mounting bores | 6 |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Bolt Hole Circle Diameter | 94 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.35
Important compatibility info
| Length | 524 mm |
| Height | 56 mm |
| Width | 344 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.35
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Additional Information | with lock nut |
| Length | 895 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.32
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Thickness | 5.7 mm |
| Placement on Vehicle | Front Axle |
| Length | 1546 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.29
Important compatibility info
| Type | Housing, fuel filter |
| Height | 276 mm |
| Outer diameter | 108 mm |
| Filter type | with water drain screw, with water separator |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.28
Important compatibility info
| Material | Plastic |
| Colour | black |
| Number of Connectors / Ports | 10. 4. 2 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.27
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| for OE number | 3Q0 199 262 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.26
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 28 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Extra Description | ProKit |
| for OE number | 26 11 1 229 360 S2 |
| Additional Information 2 | with bolts/screws |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (09203)
- 1x Febi Assembly Kit, propshaft joint (43432)
£92.25
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 52078032 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.23
Important compatibility info
| Rod/Strut | Coupling Rod |
| Bore Diameter | 22 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 50 mm |
| Length | 400 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.23
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Diff.Side | 36 |
| Min. Length | 1053 mm |
| ABS Ring Diameter | 105 mm |
| Wheel Sided Joint Diameter | 104.7 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.23
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm. 260 mm |
| Thickness | 420 mm. 178 mm |
| Function | Bellow, air suspension |
| External Thread Size | M14 x 1,5, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.18
Important compatibility info
| Length | 206 mm |
| Outer diameter | 35 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (102052)
- 1x Febi Grease Nipple (102037)
- 2x Febi Circlip, kingpin (02668)
- 1x Febi Lock Ring, steering knuckle (102050)
- 2x Febi Bush, steering knuckle (01250)
- 1x Febi Bush, kingpin (102051)
- 2x Febi Seal Ring, steering knuckle (101025)
- 1x Febi Lock Ring, steering knuckle (102049)
- 1x Febi Bush, steering knuckle (103407)
£92.18
Important compatibility info
| Function | Timing Belt Kit |
| Driven Units | Camshaft, Oil Pump |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Number of Teeth | 103 |
| for OE number | 2 631 801 S2 |
| Additional Information 2 | with tensioner element |
| Width | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (178013)
- 1x Febi Toothed Belt, power take-off (178012)
- 1x Febi Tensioner, timing belt (178898)
- 1x Febi Pulley Bolt (185896)
- 1x Febi Bolt, tensioner pulley (193243)
- 1x Febi Screw (193427)
£92.18
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.15
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 3Q0 199 262 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.14
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.12
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.11
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 980 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.10
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | after soot particulate filter |
| for OE number | 03L 906 088 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.08
Important compatibility info
| Width | 21 mm |
| Number of Teeth | 81 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (22738)
- 1x Febi Tensioner Pulley, timing belt (11561)
- 1x Febi Tensioner Pulley, timing belt (14734)
£92.04
Important compatibility info
| Type | Timing Chain |
| Function | Timing Chain |
| Number of Chain Links | 58 |
| Chain Type | Silent Chain, Closed chain |
| Timing Chain Size | Z67 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.03
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 629 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.02
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 23002 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (22998)
- 1x Febi Mounting, control/trailing arm (11662)
£91.99
Important compatibility info
| Fill quantity | 11.5 l |
| Function | Expansion Tank, coolant |
| Thickness | 147 mm |
| Number of Connectors / Ports | 2 |
| Material | PP (Polypropylene) |
| Width | 174 mm |
| Length | 477 mm |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor, with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.99
Important compatibility info
| Function | Multi-circuit Protection Valve |
| Type | Multi-circuit Protection Valve |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.99
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Length | 152 mm |
| Material | Rubber/Metal |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| External Thread Size | M8 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.99
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 94 mm |
| Surface | Coated |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.99
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 23001 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (22998)
- 1x Febi Mounting, control/trailing arm (11662)
£91.99
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 426 mm |
| Min. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 102018 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.98
Important compatibility info
| Additional Information | with hose |
| Additional Information 2 | with clamps |
| Housing Colour | Black |
| Type | Repair Kit, oil separator (crankcase ventilation) |
| Housing material | Plastic |
| Function | Repair Kit, oil separator (crankcase ventilation) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (38773)
- 1x Febi Hose, crankcase ventilation (181755)
- 2x Febi Hose Clamp (48348)
£91.95
Important compatibility info
| Additional Information | with rubber mounts |
| Stabiliser Diameter | 20.7 mm |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171122)
- 2x Febi Link/Coupling Rod, stabiliser bar (102444)
£91.94
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Front, Left |
| Material | Rubber/Metal |
| Internal Thread Size | M14 x 1,5 |
| Type | Mounting, engine |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.90
Important compatibility info
| Type | Starter |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Voltage | 12 V |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.89
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 37689 |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M14 x 1,5 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Function | Repair Kit, kingpin |
| Outer diameter | 28 mm. 35 mm |
| Length | 178 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1340 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Length | 900 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M20 x 1,5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 90 mm |
| Placement on Vehicle | Front Axle |
| Width | 44 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Additional Information 2 | with dryer, with integrated oil separator |
| Voltage | 24 V |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Function | Air Dryer, compressed-air system |
| Type | Air Dryer, compressed-air system |
| Control Range | 0,9+0,7 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.85
Important compatibility info
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Thickness | 35 mm |
| Outer diameter | 145 mm |
| Length | 145 mm |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.85
Important compatibility info
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 181407 |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.84
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 275 mm |
| Thickness | 98.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Centering Diameter | 156 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 986 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 87 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 1 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 83 mm |
| Current Strength | 70 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Type | Condenser, air conditioning |
| Core Width | 531 mm |
| Function | Condenser, air conditioning |
| Core Length | 540 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.79
Important compatibility info
| Core Width | 510 mm |
| Function | Condenser, air conditioning |
| Core Depth | 16 mm |
| Type | Condenser, air conditioning |
| Core Length | 535 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.79
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023