Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 38844 |
| Steering arm type | Control Arm |
| Outer diameter | 22 mm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 38843 |
| Steering arm type | Control Arm |
| Outer diameter | 22 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joints |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 105 mm |
| Placement on Vehicle | Front |
| Outer diameter | 150 mm |
| Function | Joint, propshaft |
| Additional Information 2 | with bolts/screws |
| Number of Holes | 6 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (102292)
- 6x Febi Screw (43412)
Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Pump, steering |
| Height | 120 mm |
| Width | 126 mm |
| Length | 128 mm |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 52 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Guide Rod |
| Length | 974 mm |
| Material | Steel |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Housing, fuel filter |
| Height | 276 mm |
| Outer diameter | 108 mm |
| Filter type | with water drain screw, with water separator |
| Function | Housing, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Bore Diameter | 22 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 50 mm |
| Length | 400 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 20 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 373 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Min. Length | 430 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bolt Hole Circle Diameter | 104 mm |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 42 |
| Number of mounting bores | 6 |
| Min. Length | 462 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 123 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Rear, Front Axle Left |
| Paired article numbers | 185462 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 2.0 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of grooves | 4 |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Material | Plastic |
| Colour | Black |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 871 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Core Length | 481 mm |
| Function | Condenser, air conditioning |
| Additional Information 2 | with dryer |
| Core Depth | 16 mm |
| Core Width | 610 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right, Charge Air Cooler |
| Material | FKM (fluorocarbon rubber), Silicone |
| Inner diameter 1 | 45 mm |
| Inner diameter 2 | 43 mm |
| Type | Charge Air Hose |
| Wall Thickness | 5.5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with fuel sender unit |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 81.96210.6072 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















