Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.5 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Height | 547 mm. 509 mm |
| Outer diameter | 256 mm |
| Inner diameter | 161 mm |
| Filter type | Filter Insert |
| Inner diameter 1 | 126 mm |
| Outer diameter 1 | 153 mm |
| Function | Air filter kit |
| Extra Description | febi Plus |
| Weight | 4.7 kg |
| Type | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (106991)
- 1x Febi Air Filter (108177)
£87.90
Important compatibility info
| Width | 64 mm |
| Parameter | 6PK + 5PK |
| Type | Belt Pulley, crankshaft |
| Weight | 2.138 kg |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 166 mm |
| Inner diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Thickness | 12 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 139 mm |
| Weight | 2.3 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M14 x 1,5 |
| External Teeth, Wheel Side | 33 |
| Weight | 6.781 kg |
| Min. Length | 596 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 130 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Weight | 1.296 kg |
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Additional Information 2 | with bolts/screws, with nut, with cable |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Weight | 2.650 kg |
| Function | Water Pump, engine cooling |
| Number of Wings | 5 |
| Number of grooves | 8 |
| Seal Material | Paper |
| Water pump impeller material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Width | 39 mm |
| Outer diameter | 110 mm |
| Inner diameter | 55 mm |
| Weight | 1.652 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Rated Power | 1.7 kW |
| Type | Starter |
| Weight | 3.7 kg |
| Voltage | 12 V |
| Function | Starter |
| Number of Teeth | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 179231 |
| Weight | 0.86 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.90
Important compatibility info
| External Thread Size | M12 x 1,75, M22 x 1,5 |
| Additional Information | with piston |
| Outer diameter | 286 mm. 260 mm |
| Thickness | 178 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 7.0 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.89
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 225 mm |
| Weight | 4.32 kg |
| Function | Repair Kit, kingpin |
| Outer diameter | 50 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, kingpin (28397)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 2x Febi Circlip (05370)
- 1x Febi Lock Ring, steering knuckle (28394)
- 1x Febi Grease Nipple (01094)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Kingpin (32432)
- 1x Febi Nut (32433)
- 1x Febi Screw (32435)
- 1x Febi Spacer, kingpin (32436)
- 2x Febi Seal Ring, steering knuckle (32434)
£87.87
Important compatibility info
| Type | Oil Cooler, engine oil |
| Core Width | 76 mm |
| Function | Oil Cooler, engine oil |
| Core Length | 149 mm |
| Core Depth | 75 mm |
| Additional Information | with gasket/seal |
| Weight | 1.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.86
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 164 |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.418 kg |
| Replaces | 100619 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.86
Important compatibility info
| Outer diameter | 100.5 mm |
| Weight | 0.5 kg |
| Type | Piston, air compressor |
| Function | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.84
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 53126888 |
| Weight | 2.570 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.82
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 46166 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut, with hydro mount |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (46163)
- 1x Febi Nut (38356)
- 1x Febi Mounting, control/trailing arm (23359)
£87.80
Important compatibility info
| Weight | 1.585 kg |
| Inner diameter | 45 mm |
| Function | Suspension, propshaft |
| Replaces | 07189 |
| Type | Suspension, propshaft |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.80
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 183208 |
| Weight | 2.9 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.79
Important compatibility info
| Operating Mode | Mechanical |
| Outer diameter | 75 mm |
| Housing material | Plastic |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 0.650 kg |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.76
Important compatibility info
| Additional Information 2 | non-switchable water pump |
| Weight | 1.529 kg |
| Additional Information | with gasket/seal |
| Material | Grey Cast Iron |
| Number of grooves | 5 |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.74
Important compatibility info
| Weight | 3.560 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 31 mm. 58 mm |
| Bolt Hole Circle Diameter | 64 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Width | 137 mm |
| Outer diameter | 137 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.73
Important compatibility info
| for OE number | 4M0 199 372 GP |
| Weight | 2.000 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.72
Important compatibility info
| for OE number | 4M0 199 371 FE |
| Weight | 2.030 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.63
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 8.8 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 356 mm |
| Thickness | 36.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.62
Important compatibility info
| for OE number | 11 36 8 617 694 |
| Weight | 0.071 kg |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Spanner Size | 22 |
| External Thread Size | M22 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.62
Important compatibility info
| Function | Cylinder Head Gasket Set, air compressor |
| Type | Cylinder Head Gasket Set, air compressor |
| Weight | 0.260 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.62
Important compatibility info
| Weight | 1.660 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| for OE number | 0361.N4 |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.59
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.921 kg |
| for OE number | 1K0 199 262 CB |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.59
Important compatibility info
| Weight | 1.738 kg |
| Additional Information 2 | with spacer plate |
| Length | 140 mm |
| Width | 120 mm |
| Thickness | 80 mm |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.59
Important compatibility info
| Weight | 11.08 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Thickness | 52.1 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.57
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.400 kg |
| for OE number | 238 240 21 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.51
Important compatibility info
| Parameter | 6 PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 153 mm |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Extra Description | ProKit |
| Additional Information 2 | with screw, with seal ring |
| Type | Belt Pulley, crankshaft |
| Weight | 1.580 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (103826)
- 1x Febi Bolt, crankshaft gear (39116)
- 1x Febi Shaft Seal, oil pump (31144)
£87.48
Important compatibility info
| Weight | 10.670 kg |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 573 mm |
| Material | Steel |
| Outer diameter | 50 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Function | Control/Trailing Arm, wheel suspension |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.47
Important compatibility info
| Weight | 6.5 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Rolling piston material | Steel |
| Outer diameter | 155 mm. 190 mm |
| Thickness | 280 mm. 155 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Port / Connector type | Voss Stecksystem 232 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.46
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 181748 |
| Weight | 4.402 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.38
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Weight | 4.402 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 181745 |
| Material | Aluminium |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.38
Important compatibility info
| Wheel Sided Joint Diameter | 101 mm |
| External Teeth, Diff.Side | 39 |
| Placement on Vehicle | Front Axle Right |
| ABS Ring Diameter | 102 mm |
| External Teeth, Wheel Side | 28 |
| Min. Length | 1141 mm |
| Weight | 10.836 kg |
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.38
Important compatibility info
| Weight | 8.0 kg |
| Surface | Coated |
| Centering Diameter | 70 mm |
| Bolt Hole Circle Diameter | 115 mm |
| Minimum thickness | 20 mm |
| Brake Disc Thickness | 23 mm |
| Thickness | 45 mm |
| Outer diameter | 315 mm |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.38
Important compatibility info
| Weight | 11.15 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 200 mm |
| Width | 120 mm |
| Thickness | 165 mm |
| Function | Mounting, leaf spring |
| Internal Thread Size | M20 x 2 |
| Hole Spacing | 60 mm. 170 mm |
| Type | Mounting, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.36
Important compatibility info
| Inner diameter | 15 mm |
| Function | Mounting, engine / Mounting, manual transmission |
| Width | 230 mm |
| Thickness | 130 mm |
| Type | Mounting, engine / Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 7.002 kg |
| Placement on Vehicle | Rear, both sides |
| Material | Cast Steel |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.35
Important compatibility info
| Weight | 8.970 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.32
Important compatibility info
| Weight | 0.381 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 164 |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.30
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 9.3 kg |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 75 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Brake Disc |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.29
Important compatibility info
| Weight | 0.490 kg |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.29
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 10.0 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 47 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.6 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| for OE number | 82 00 019 581 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.25
Important compatibility info
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Additional Information | with piston |
| Weight | 7.7 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 225 mm. 259 mm |
| Thickness | 268 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.14
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 5Q0 199 262 BN |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.455 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.13
Important compatibility info
| Wheel Sided Joint Diameter | 89.2 mm |
| Transmission-side joint diameter | 81.6 mm |
| Min. Length | 956 mm |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 27 |
| Weight | 9.598 kg |
| Type | Drive Shaft |
| Thread Size | M20x1,5 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.09
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 106 mm |
| Function | Joint, propshaft |
| Weight | 0.89 kg |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19528)
- 6x Febi Screw (43412)
£87.09
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023