Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 179232 |
| Placement on Vehicle | Right Rear |
| Additional Information | with fastening/mounting material, without electric motor |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.87
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Length | 900 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M20 x 1,5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 90 mm |
| Placement on Vehicle | Front Axle |
| Width | 44 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.86
Important compatibility info
| Additional Information 2 | with dryer, with integrated oil separator |
| Voltage | 24 V |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Function | Air Dryer, compressed-air system |
| Type | Air Dryer, compressed-air system |
| Control Range | 0,9+0,7 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.85
Important compatibility info
| Placement on Vehicle | Exhaust Side, Intake Side |
| Operating Mode | Mechanical |
| Type | Tappet |
| Function | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.85
Important compatibility info
| Type | Condenser, air conditioning |
| Core Width | 531 mm |
| Function | Condenser, air conditioning |
| Core Length | 540 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.85
Important compatibility info
| Core Width | 510 mm |
| Function | Condenser, air conditioning |
| Core Depth | 16 mm |
| Type | Condenser, air conditioning |
| Core Length | 535 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.85
Important compatibility info
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Thickness | 35 mm |
| Outer diameter | 145 mm |
| Length | 145 mm |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.85
Important compatibility info
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 181407 |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.84
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Paired article numbers | 39505 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.83
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 986 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 87 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.82
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 235 mm |
| Outer diameter | 50 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with plain bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (28399)
£91.78
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 66.3 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| for OE number | 34 20 6 797 605 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.76
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.74
Important compatibility info
| Mounting points diameter | 20 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 373 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Min. Length | 430 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.73
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| for OE number | 457 200 28 01 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.71
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front, Front Axle Left, outer |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185539 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.71
Important compatibility info
| Parameter | VL120R |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.70
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Length | 848 mm |
| Outer diameter | 52 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Replaces | 18206 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.70
Important compatibility info
| Function | Camshaft Adjuster |
| Outer diameter | 81 mm |
| Number of Teeth | 36 |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.69
Important compatibility info
| Function | Camshaft Adjuster |
| Outer diameter | 81 mm |
| Number of Teeth | 36 |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (45084)
- 1x Febi Bolt, camshaft gear (101125)
- 1x Febi Quill, cylinder head (101129)
£91.69
Important compatibility info
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 451 mm |
| Core Width | 670 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.69
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.67
Important compatibility info
| Length | 171 mm |
| Voltage | 4.4 V |
| External Thread Size | M10 x 1 |
| Glow Plug Type | Metal glow plug |
| Function | Glow Plug |
| Type | Glow Plug |
| Spanner Size | 10 |
| Fitting Depth | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.66
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 84 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49486)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (49488)
- 1x Febi Guide, timing chain (49489)
- 1x Febi Gear, injection pump (49490)
- 1x Febi Bolt, camshaft gear (49491)
£91.66
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 03C 109 158 A S6 |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
- 2x Febi Gear/Sprocket, camshaft (105997)
- 1x Febi Sprocket, crankshaft (107818)
£91.65
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 71.5 mm |
| Max. Length | 585 mm |
| Min. Length | 390 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.65
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 55 mm |
| Outer diameter | 123 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 40 mm |
| Bolt Hole Circle Diameter | 95 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.63
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 179231 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.63
Important compatibility info
| for OE number | 2 252 075 |
| Control Type | Rotary Operation |
| Type | Switch, headlight |
| Function | Switch, headlight |
| Combi Switch Function | with hazard warning light function, with light dimmer function, Headlight Levelling |
| Number of Connectors / Ports | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.63
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 070 906 088 AF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.60
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Thickness | 34.3 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Minimum thickness | 28 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Outer diameter | 340 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Brake Disc Thickness | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.59
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 154 mm |
| Outer diameter 1 | 72 mm |
| Width | 48.5 mm |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.59
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | internally vented, slotted/perforated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 41.4 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.58
Important compatibility info
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 75 mm |
| Transmission-side joint diameter | 69.7 mm |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 24 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 597 mm |
| Transmission Type | Manual Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.56
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Pulleys | with belt pulley |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.55
Important compatibility info
| Type | Mounting, automatic transmission / Mounting, manual transmission |
| Extra Description | febi Plus |
| Placement on Vehicle | outer |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission / Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.50
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 348 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.48
Important compatibility info
| Outer diameter | 286 mm. 259 mm |
| Thickness | 752 mm. 257 mm |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.47
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Units / Pulleys | incl. deflection pulley |
| Function | V-Ribbed Belt Set |
| Length | 1512 mm |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
- 1x Febi V-Ribbed Belt (40706)
£91.44
Important compatibility info
| Inner diameter | 170 mm |
| Height | 82.1 mm |
| Outer diameter | 403 mm |
| Placement on Vehicle | Front Axle |
| Function | Cover Sheet, brake drum |
| Type | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.41
Important compatibility info
| Type | Camshaft |
| Paired article numbers | 171969 |
| Placement on Vehicle | Intake Side |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.40
Important compatibility info
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Housing material | Cast Aluminium |
| for OE number | 104 200 33 01 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.39
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front, Lower |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 196588 |
| Cone Size | 12.2 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.38
Important compatibility info
| Width | 60 mm |
| Thickness | 50 mm |
| Voltage | 24 V |
| Operating Mode | Pneumatic, Electric-pneumatic |
| Function | Boost Pressure Control Valve |
| Length | 85 mm |
| Extra Description | febi Plus |
| Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.37
Important compatibility info
| Additional Information | with piston, with piston rod |
| Placement on Vehicle | Rear Axle |
| Type | Bellow, air suspension |
| Outer diameter | 228 mm. 195 mm |
| Rolling piston material | Plastic |
| External Thread Size | M16 x 1,5, M14 x 2 |
| Function | Bellow, air suspension |
| Thickness | 558 mm. 158 mm |
| for OE number | 42566304 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.37
Important compatibility info
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| for OE number | 48 05 108 |
| Number of Teeth | 46 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.37
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm. 205 mm |
| Thickness | 410 mm. 240 mm |
| Function | Bellow, air suspension |
| External Thread Size | M14 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.36
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Thickness | 58.4 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 28 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£91.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023