Important compatibility info
| Function | Sealing Set, air compressor |
| for OE number | 20889546 SK4 |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 652 mm |
| Core Width | 341 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| for OE number | 1 710 241 |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 471 mm |
| Core Width | 602 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals, with oil cooler, with oil filter |
| Additional Information 2 | with sensor |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 426 mm |
| Min. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 102018 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Pump, steering |
| Height | 120 mm |
| Width | 126 mm |
| Length | 128 mm |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 52 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Guide Rod |
| Length | 974 mm |
| Material | Steel |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Electric Motor, window regulator |
| Function | Electric Motor, window regulator |
| Number of Connectors / Ports | 6 |
| Paired article numbers | 179338 |
| Placement on Vehicle | Right |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| Wheel Sided Joint Diameter | 112 mm |
| Transmission-side joint diameter | 103.5 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1086 mm |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 980 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Electric Motor, window regulator |
| Additional Information 2 | with bolts/screws |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Left |
| Function | Electric Motor, window regulator |
| Paired article numbers | 179337 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Pull, manual transmission |
| Transmission Type | 5-Speed Manual Transmission |
| Inner length 2 | 830 mm |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 1183 mm |
| Inner length 1 | 850 mm |
| Outer length 2 | 1114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 41.5 mm |
| Outer diameter | 55 mm |
| Function | Tensioner Pulley, timing belt |
| Additional Information 2 | with screw |
| Type | Tensioner Pulley, timing belt |
| Additional Information | with spring |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, tensioner pulley (31844)
- 1x Febi Tension Spring, tensioner pulley (timing belt) (31828)
- 1x Febi Tensioner Pulley, timing belt (31310)
Important compatibility info
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 8 |
| Length | 880 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29037)
- 1x Febi Belt Tensioner, v-ribbed belt (22852)
Important compatibility info
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| for OE number | 11 61 7 533 400 S1 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (39653)
- 1x Febi Hose, crankcase ventilation (36730)
- 1x Febi Hose, crankcase ventilation (36031)
- 1x Febi Hose, crankcase ventilation (47227)
- 1x Febi Hose, crankcase ventilation (47228)
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 22448-6N015 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















