Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 397 mm |
| Min. Length | 188 mm |
| Pipe Diameter | 94 mm. 51 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Paired article numbers | 181408 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Inner length 1 | 1068 mm |
| Inner length 2 | 990 mm |
| Outer length 1 | 1348 mm |
| Driver Position | for right-hand drive vehicles |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 1258 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Length | 206 mm |
| Outer diameter | 35 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (102052)
- 1x Febi Grease Nipple (102037)
- 2x Febi Circlip, kingpin (02668)
- 1x Febi Lock Ring, steering knuckle (102050)
- 2x Febi Bush, steering knuckle (01250)
- 1x Febi Bush, kingpin (102051)
- 2x Febi Seal Ring, steering knuckle (101025)
- 1x Febi Lock Ring, steering knuckle (102049)
- 1x Febi Bush, steering knuckle (103407)
£89.88
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 81.96210.6072 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.86
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.84
Important compatibility info
| Outer diameter | 20 mm |
| Inner diameter | 16 mm |
| Number of Connectors / Ports | 2 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.84
Important compatibility info
| Adjustable | Adjustable |
| Pipe Diameter | 40 mm |
| Length | 680 mm |
| Placement on Vehicle | Centre, Front Axle |
| Additional Information 2 | with crown nut |
| Type | Tie Rod |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Function | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.84
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.83
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 169 mm. 228 mm |
| Thickness | 147 mm. 505 mm |
| Type | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M16 x 1,5, M24 x 1,5, M14 x 2 |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.82
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Centering Diameter | 75 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Brake Disc |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.81
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179214 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.80
Important compatibility info
| Seal Material | Metal |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Number of Wings | 7 |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.80
Important compatibility info
| Function | Camshaft |
| Type | Camshaft |
| for OE number | 028 109 101 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.79
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.78
Important compatibility info
| Number of Ribs | 30 |
| Type | Oil Cooler, automatic transmission |
| Function | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.75
Important compatibility info
| Min. Length | 422 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 692 mm |
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 20 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.74
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.73
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 554 mm |
| Min. Length | 372 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.72
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 37349 |
| Bolt Head Diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holders |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.71
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 660 mm |
| Piston conrod diameter | 15 mm |
| Min. Length | 398 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.71
Important compatibility info
| Placement on Vehicle | Left, Right, Front |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.71
Important compatibility info
| Function | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
| Length | 891 mm |
| Outer diameter | 50 mm |
| Thickness | 90.5 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M28 x 1,5 RHT |
| External Thread Size | M18 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.70
Important compatibility info
| Length | 180 mm |
| Height | 128 mm |
| Width | 111 mm |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.68
Important compatibility info
| Paired article numbers | 37350 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Bolt Head Diameter | 17 mm |
| Material | Cast Steel |
| External Thread Size | M12 x 1,25, M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holders, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.64
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 238 240 21 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.64
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| for OE number | 16 14 7 163 296 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.64
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Housing material | Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.63
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 20499474 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.63
Important compatibility info
| Min. Length | 629 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 84 mm |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 27 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 80.4 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.63
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 97 °C. 102 °C |
| Number of Connectors / Ports | 2 |
| Material | Plastic |
| Type | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.62
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 568 mm |
| Min. Length | 348 mm |
| Pipe Diameter | 57 mm. 50 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.60
Important compatibility info
| Height | 547 mm. 509 mm |
| Outer diameter | 256 mm |
| Inner diameter | 161 mm |
| Filter type | Filter Insert |
| Inner diameter 1 | 126 mm |
| Outer diameter 1 | 153 mm |
| Function | Air filter kit |
| Extra Description | febi Plus |
| Type | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (106991)
- 1x Febi Air Filter (108177)
£89.60
Important compatibility info
| Additional Information | with piston |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 180 mm |
| Thickness | 280 mm. 130 mm |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.59
Important compatibility info
| Function | Sealing Set, air compressor |
| for OE number | 20889546 SK4 |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.57
Important compatibility info
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 651 mm |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.54
Important compatibility info
| Length | 350 mm |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.54
Important compatibility info
| Paired article numbers | 194496 |
| Type | Control Element, parking brake caliper |
| Extra Description | febi Plus |
| Function | Control Element, parking brake caliper |
| Number of Connectors / Ports | 2 |
| Number of Teeth | 6 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.48
Important compatibility info
| Function | Control Element, parking brake caliper |
| Type | Control Element, parking brake caliper |
| Paired article numbers | 194495 |
| Number of Teeth | 6 |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.48
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 55.4 mm |
| Brake Disc Thickness | 32.2 mm |
| Minimum thickness | 28.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.44
Important compatibility info
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Diff.Side | 36 |
| Min. Length | 1053 mm |
| ABS Ring Diameter | 105 mm |
| Wheel Sided Joint Diameter | 104.7 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.44
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.40
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Cable Length | 414 mm |
| Spanner Size | 17 |
| Placement on Vehicle | before soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.39
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 322 mm |
| Number of Teeth | 48 |
| Paired article numbers | 186653 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 285 mm |
| Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.39
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 322 mm |
| Number of Teeth | 48 |
| Paired article numbers | 186654 |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 285 mm |
| Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.39
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 336 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.39
Important compatibility info
| Additional Information 2 | non-switchable water pump |
| Additional Information | with gasket/seal |
| Number of grooves | 5 |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.37
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front, Front Axle Left, outer |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185539 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.32
Important compatibility info
| Additional Information | with lock nut |
| Placement on Vehicle | Front, Front Axle Right, outer |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185583 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.32
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 3 |
| Function | Wiper Motor |
| Voltage | 12 V |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.30
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023