Important compatibility info
| Function | Clutch Release Bearing |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
| for OE number | 20571928 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1340 mm |
| Rod/Strut | Push Rod |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Operating Mode | Automatic |
| Material | Metal |
| Width | 86 mm |
| Outer diameter | 75 mm |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Repair Kit, kingpin |
| Length | 225 mm |
| Outer diameter | 50 mm |
| Type | Repair Kit, kingpin |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (32432)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Bush, kingpin (28397)
- 2x Febi Seal Ring, steering knuckle (32434)
- 2x Febi Circlip (05370)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Nut (32433)
- 1x Febi Spacer, kingpin (32436)
- 1x Febi Screw (32435)
- 1x Febi Grease Nipple (04187)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 1x Febi Lock Ring, steering knuckle (28394)
Important compatibility info
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 179231 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Paired article numbers | 179232 |
| Placement on Vehicle | Right Rear |
| Additional Information | with fastening/mounting material, without electric motor |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Electric Motor, window regulator |
| Function | Electric Motor, window regulator |
| Number of Connectors / Ports | 6 |
| Paired article numbers | 179338 |
| Placement on Vehicle | Right |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5, M30 x 1,5 LHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M22x1,5 |
| External Teeth, Diff.Side | 34 |
| Transmission-side joint diameter | 79 mm |
| Min. Length | 591 mm |
| External Teeth, Wheel Side | 26 |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 82.1 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| External Teeth, Diff.Side | 26 |
| Min. Length | 943 mm |
| Wheel Sided Joint Diameter | 82 mm |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 75.3 mm |
| Function | Drive Shaft |
| Paired article numbers | 183389 |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 84 mm |
| Min. Length | 956 mm |
| External Teeth, Diff.Side | 25 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 81 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Min. Length | 960 mm |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Transmission-side joint diameter | 77 mm |
| Paired article numbers | 183590 |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 624 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rated Power | 1.7 kW |
| Type | Starter |
| Voltage | 12 V |
| Function | Starter |
| Number of Teeth | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.0 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.5 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16 x 1,5 |
| External Teeth, Wheel Side | 38 |
| Min. Length | 622 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 89.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Additional Information 2 | with bolts/screws, with nut, with cable |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 180 mm |
| Height | 128 mm |
| Width | 111 mm |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 5WA 199 262 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Steering Column Switch |
| Number of Connectors / Ports | 15 |
| Combi Switch Function | with indicator function, with klaxon, with light dimmer function, with fog-lamp function, with high beam function, with rear fog light function |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 5 |
| Housing Type | with housing |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 113 094 00 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 64 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G53HP, G53HR |
| Wet Boiling Point | 110 °C |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gear, balance shaft (40264)
- 1x Febi Chain, oil pump drive (25357)
- 1x Febi Chain Tensioner, oil pump drive (25417)
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Additional Information 2 | with lid, with cap |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Starter |
| Type | Starter |
| Rated Power | 1.0 kW |
| Number of Teeth | 8 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 198420 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 33.93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























