Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30199 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.224 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Right |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 1010 mm |
| Inner length 1 | 965 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 1.332 kg |
| Outer length 1 | 1225 mm |
| Outer length 2 | 1300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Parts Set, maintenance service |
| Weight | 5.49 kg |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (35426)
- 1x Febi Fuel filter (40578)
- 1x Febi Oil Filter (27799)
- 2x Febi Oil Filter (39215)
£83.94
Important compatibility info
| Function | Tensioner, timing chain |
| Weight | 0.215 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| for OE number | 000 260 50 98 |
| Weight | 0.17 kg |
| Type | Repair Kit, gear shift lever |
| Function | Repair Kit, gear shift lever |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Paired article numbers | 30432 |
| Weight | 3.83 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Outer length 1 | 1164 mm |
| Weight | 1.142 kg |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 887 mm |
| Outer length 2 | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Length | 1125 mm |
| Number of Ribs | 7 |
| Weight | 0.874 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38434)
- 1x Febi Belt Tensioner, v-ribbed belt (27445)
£83.94
Important compatibility info
| Weight | 0.9 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Length | 153 mm. 180 mm |
| Outer diameter | 43 mm |
| Bolt Hole Circle Diameter | 16 mm |
| Internal Thread Size | M12 x 1,5 |
| Weight | 0.464 kg |
| Function | Slave Cylinder / Slave Cylinder, engine brake |
| Type | Slave Cylinder / Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 1.222 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1573 mm |
| Inner length 2 | 1252 mm |
| Outer length 1 | 1880 mm |
| Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 3.83 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30433 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Operating Mode | Electric |
| for OE number | 059 121 012 B |
| Weight | 0.62 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Internal Thread Size | M30 x 1,5 |
| Weight | 6.093 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Material | Sheet Steel |
| Cone Size 2 | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 2.21 kg |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43136 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 8.97 kg |
| Placement on Vehicle | Front Axle |
| Length | 988 mm |
| Width | 50 mm |
| Thickness | 116 mm |
| Rod/Strut | Guide Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M27 x 1,5, M24 x 1,5 |
| Function | Centre Rod Assembly |
| Cone Size | 32 mm. 30 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 38 mm |
| Length | 885 mm |
| Weight | 6.568 kg |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Paired article numbers | 193433 |
| Weight | 5.2 kg |
| Placement on Vehicle | Front Axle Right |
| Width | 65 mm |
| Outer diameter | 100 mm |
| Inner diameter | 29 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 0.8 kg |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 110 |
| Function | Timing Chain Kit |
| for OE number | ME194698 |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1010 mm |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.07 kg |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 2.3 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Weight | 1.734 kg |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 0.047 kg |
| Placement on Vehicle | Left |
| Type | Actuator, seat adjustment |
| Operating Mode | Pneumatic |
| Material | Plastic |
| Function | Actuator, seat adjustment |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 1.05 kg |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Colour | Black |
| Weight | 0.684 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Outer diameter | 73 mm |
| Number of Ribs | 6 |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.74 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bolt Hole Circle Diameter | 104 mm |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 42 |
| Weight | 6.190 kg |
| Number of mounting bores | 6 |
| Min. Length | 462 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 123 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 3.429 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 406 mm |
| Min. Length | 360 mm |
| Mounting points diameter | 14 mm |
| Operating Mode | Pneumatic |
| Piston conrod diameter | 14 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Length | 733 mm. 783 mm |
| Weight | 6.7 kg |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Pipe Diameter | 76 mm. 63 mm |
| Min. Length | 342 mm |
| Max. Length | 534 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Weight | 4.77 kg |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Starter |
| Weight | 4.0 kg |
| Type | Starter |
| Rated Power | 2.0 kW |
| Number of Teeth | 10 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Length | 130 mm |
| Width | 130 mm |
| Thickness | 100.9 mm |
| Weight | 4.136 kg |
| Hole Spacing | 92 mm |
| Function | Cylinder Liner, air compressor |
| Type | Cylinder Liner, air compressor |
| Additional Information | with retaining rings, with piston, with piston rings, with piston pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 0.21 kg |
| Number of Connectors / Ports | 5 |
| Function | Control Unit, air conditioning |
| Extra Description | febi Plus |
| Type | Control Unit, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Additional Information 2 | with dryer |
| Weight | 2.165 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 320 mm |
| Core Width | 735 mm |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 285 mm |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 36 mm |
| Mounting points diameter | 4.2 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Weight | 3.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.230 kg |
| Bearing/Mounting Type | Vacuum controlled hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Paired article numbers | 197528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.92
Important compatibility info
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.189 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.91
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 106 |
| Chain Type | Duplex, Closed chain |
| Weight | 1.215 kg |
| Type | Timing Chain Kit |
| for OE number | 102 050 10 11 S2 |
| Timing Chain Size | D67ZN |
| Extra Description | Basic Short Kit |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17655)
- 1x Febi Tensioner, timing chain (01050)
- 1x Febi Guide, timing chain (10331)
- 1x Febi Guide, timing chain (17072)
- 1x Febi Guide, timing chain (17073)
£83.90
Important compatibility info
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Joint, propshaft |
| Weight | 1.077 kg |
| Additional Information | with nuts |
| Outer diameter | 146 mm |
| Replaces | 19058 |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 42 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Thickness | 26 mm |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03411)
- 6x Febi Screw (03704)
- 1x Febi Assembly Kit, propshaft joint (22118)
£83.88
Important compatibility info
| Weight | 1.443 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 213 240 24 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.86
Important compatibility info
| Placement on Vehicle | Right Rear |
| Paired article numbers | 179681 |
| Additional Information | with adjuster |
| Function | Door Lock |
| Extra Description | febi Plus |
| Weight | 0.588 kg |
| Lock System | with double sealing |
| Number of Connectors / Ports | 6 |
| Operating Mode | Electric |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.85
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Weight | 0.315 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with screw set |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.85
Important compatibility info
| Weight | 2.31 kg |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 58. 130 |
| for OE number | 036 109 119 AG S3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21772)
- 1x Febi Water Pump, engine cooling (18894)
£83.78
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 6.8 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.76
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented |
| Weight | 14.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Thickness | 54.5 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 33.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.71
Important compatibility info
| Number of Teeth | 139 |
| Function | Timing Belt Kit |
| Width | 25.4 mm |
| Weight | 0.62 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (39100)
- 1x Febi Tensioner Pulley, timing belt (39101)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
£83.71
Important compatibility info
| Type | Cable Pull, manual transmission |
| Inner length 2 | 780 mm |
| Inner length 1 | 802 mm |
| Weight | 0.928 kg |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1121 mm |
| Outer length 2 | 1102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.70
Important compatibility info
| Placement on Vehicle | Front Axle |
| Thickness | 55 mm |
| Brake Disc Thickness | 33 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 116 mm |
| Centering Diameter | 131 mm |
| Surface | Coated |
| Outer diameter | 308 mm |
| Weight | 10.0 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.69
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Colour | Black |
| Weight | 0.64 kg |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.68
Important compatibility info
| Weight | 7.71 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 80 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.66
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023