Important compatibility info
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch, with cable |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 170965 |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 19 mm |
| Additional Information | with gaskets/seals, with fastening/mounting material |
| Number of Teeth | 99 |
| Surface | Coated |
| for OE number | 23356-42500 S5 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width of castor bearing surface | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26114)
- 1x Febi Water Pump, engine cooling (173143)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 580 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Paired article numbers | 179226 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| External Thread Size | M16 x 1,5 |
| Paired article numbers | 179228 |
| Steering arm type | Control Arm |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Belt Pulley, alternator |
| Inner diameter | 16 mm |
| Outer diameter | 116 mm |
| Function | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 182626 |
| Material | Sheet Steel |
| Steering arm type | Control Arm, Four-Point Link (CV) |
| Placement on Vehicle | Front Axle Left, Lower, outer |
| Additional Information 2 | with ball joint |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 182625 |
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Material | Sheet Steel |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 183086 |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Min. Length | 613 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| External Teeth, Wheel Side | 29 |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Release Fork, clutch |
| Additional Information 2 | with bolts/screws |
| Additional Information | with bush, with fastening/mounting material |
| Function | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 153 mm |
| Outer diameter | 153 mm |
| Additional Information 2 | with screw |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (103249)
- 1x Febi Bolt, crankshaft gear (39116)
Important compatibility info
| Additional Information | with Split Pin |
| External Teeth, Wheel Side | 28 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 101.1 mm |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| Paired article numbers | 181099 |
| Wheel Sided Joint Diameter | 102 mm |
| External Teeth, Diff.Side | 41 |
| Min. Length | 755 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Pneumatic |
| Max. Length | 315 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 81 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 22124 |
| Number of Connectors / Ports | 12 |
| Combi Switch Function | with indicator function, with light dimmer function, with rear fog light function, with high beam function, with fog-lamp function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function, with rear fog light function, with klaxon, with high beam function |
| Number of Connectors / Ports | 15 |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | from hydraulic pump to steering gear |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 330 mm. 500 mm |
| External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 106 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (19528)
- 6x Febi Screw (43412)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 716 mm |
| Min. Length | 437 mm |
| Pipe Diameter | 45 mm. 63 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 86 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Timing Chain Size | G53HS-8, G53HS-7 |
| Placement on Vehicle | Upper |
| for OE number | 11 31 8 590 950 S4 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Guide, timing chain (105979)
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 38.1 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72.5 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 652 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.2 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Thread Size | M38 x 1,5 |
| Paired article numbers | 196585 |
| Bore Diameter | 24.4 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























