Proud to be a UK-based company
Contact us
Important compatibility info
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Length | 733 mm. 783 mm |
| Weight | 6.7 kg |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 1.222 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1573 mm |
| Inner length 2 | 1252 mm |
| Outer length 1 | 1880 mm |
| Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.69 kg |
| for OE number | 20746637 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 615 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 1.770 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16 x 1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 6.557 kg |
| External Teeth, Diff.Side | 40 |
| Min. Length | 500 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Upper |
| Timing Chain Size | G68HR |
| Number of Chain Links | 206 |
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain |
| Weight | 0.85 kg |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 8.97 kg |
| Placement on Vehicle | Front Axle |
| Length | 988 mm |
| Width | 50 mm |
| Thickness | 116 mm |
| Rod/Strut | Guide Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Tensioner, timing chain |
| Weight | 0.215 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Weight | 1.734 kg |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Weight | 0.72 kg |
| for OE number | 74 82 158 841 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 690 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 3.429 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 406 mm |
| Min. Length | 360 mm |
| Mounting points diameter | 14 mm |
| Operating Mode | Pneumatic |
| Piston conrod diameter | 14 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Outer length 1 | 1164 mm |
| Weight | 1.142 kg |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 887 mm |
| Outer length 2 | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 0.876 kg |
| Function | Oil Cooler, engine oil |
| Number of Ribs | 24 |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
| for OE number | 11 42 8 510 855 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (105924)
- 1x Febi Gasket Set, oil cooler (105961)
- 1x Febi Gasket, oil cooler (105962)
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle |
| External Thread Size | M18 x 1,5 |
| Length | 1620 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Internal Thread Size | M28 x 1,5 RHT, M28 x 1,5 LHT |
| Weight | 7.800 kg |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 6.510 kg |
| Function | Centre Rod Assembly |
| Outer diameter | 40 mm |
| Cone Size | 26.2 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Length | 730 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Right |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 1010 mm |
| Inner length 1 | 965 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 1.332 kg |
| Outer length 1 | 1225 mm |
| Outer length 2 | 1300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.230 kg |
| Bearing/Mounting Type | Vacuum controlled hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Paired article numbers | 197528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.92
Important compatibility info
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.189 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.91
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Eject Force | 1260 N |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Placement on Vehicle | both sides |
| Length | 663 mm |
| Weight | 1.40 kg |
| Stroke | 166 mm |
| Housing length | 408.5 mm |
| Housing Diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.90
Important compatibility info
| Weight | 0.8 kg |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 110 |
| Function | Timing Chain Kit |
| for OE number | ME194698 |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.90
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023