Proud to be a UK-based company
Contact us
Important compatibility info
| Transmission-side joint diameter | 81.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Bore Diameter | 11 mm |
| Paired article numbers | 181281 |
| Bolt Hole Circle Diameter | 104 mm |
| Thread Size | M16 x 1,5 |
| Number of mounting bores | 6 |
| Weight | 7.470 kg |
| External Teeth, Wheel Side | 38 |
| Wheel Sided Joint Diameter | 98 mm |
| ABS Ring Diameter | 81 mm |
| Min. Length | 617 mm |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.35
Important compatibility info
| Operating Mode | Hydraulic |
| Weight | 0.27 kg |
| Placement on Vehicle | Upper Right |
| Paired article numbers | 12510 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.34
Important compatibility info
| Weight | 1.548 kg |
| Placement on Vehicle | Right Front |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.31
Important compatibility info
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.31 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 41749 |
| Additional Information 2 | with rubber mount, with ball joint |
| Cone Size 2 | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.30
Important compatibility info
| Weight | 0.962 kg |
| Function | Repair Set, propshaft centre bearing |
| Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31851)
- 1x Febi Protective Cover, propshaft centre bearing (171015)
- 1x Febi Protective Cover, propshaft centre bearing (171017)
- 1x Febi Circlip (170445)
£80.30
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 41748 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Cone Size 2 | 17 mm |
| Weight | 3.31 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.30
Important compatibility info
| Weight | 1.526 kg |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.29
Important compatibility info
| Additional Information 2 | with dryer |
| Type | Condenser, air conditioning |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
| Core Length | 461 mm |
| Weight | 2.542 kg |
| Core Width | 593 mm |
| Function | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.25
Important compatibility info
| Weight | 1.310 kg |
| Outer diameter | 70 mm. 73.5 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.21
Important compatibility info
| Type | Control Valve, camshaft adjustment |
| Weight | 0.170 kg |
| Paired article numbers | 175438 |
| Placement on Vehicle | Exhaust Side |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.19
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Sensor, pneumatic suspension level |
| Weight | 0.120 kg |
| Placement on Vehicle | Rear Axle |
| Function | Sensor, pneumatic suspension level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.16
Important compatibility info
| Additional Information 2 | with fastening material |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 210.5 mm |
| Width | 108.2 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Brake Type | Disc Brake |
| Thickness/Strength 1 | 30 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Weight | 9.81 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.12
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 86 mm |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 0.001 kg |
| Number of mounting bores | 6 |
| Min. Length | 535 mm |
| Wheel Sided Joint Diameter | 94 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.11
Important compatibility info
| Weight | 0.073 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.06
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 4.70 kg |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Paired article numbers | 31285 |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.06
Important compatibility info
| Weight | 1.5 kg |
| Type | Interior Blower |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.06
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 146 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Weight | 1.030 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (23445)
- 1x Febi Tensioner Pulley, timing belt (27792)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (27819)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178777)
£80.04
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 108719 |
| Weight | 1.578 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.03
Important compatibility info
| Outer diameter | 118 mm |
| Type | Filter, crankcase ventilation |
| Function | Filter, crankcase ventilation |
| Height | 138 mm |
| Additional Information | with gasket/seal |
| Weight | 0.230 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.02
Important compatibility info
| Length | 840 mm |
| Additional Information | with nuts |
| Thread Size | M20 x 1,5 |
| Rod/Strut | Push Rod |
| Weight | 7.000 kg |
| Cone Size | 26.2 mm |
| Adjustable | adjustable |
| Pipe Diameter | 48 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.00
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.207 kg |
| Placement on Vehicle | Right |
| Paired article numbers | 183362 |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.99
Important compatibility info
| Weight | 4.340 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21466 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (07966)
- 1x Febi Mounting, control/trailing arm (21464)
£79.99
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 23 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Material | Steel |
| Weight | 10.398 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 175615 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | EGR Valve |
| Weight | 0.68 kg |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 7.7 kg |
| Length | 840 mm |
| Outer diameter | 10 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M28 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 6.300 kg |
| Type | Tie Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Length | 1594 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with crown nut |
| External Thread Size | M18 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Weight | 7.05 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Weight | 0.910 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 24.5 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Stabiliser Diameter | 18 mm |
| Weight | 3.366 kg |
| Placement on Vehicle | Front Axle |
| Length | 950 mm |
| Additional Information | with rubber mounts |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (37071)
- 1x Febi Repair Kit, stabiliser bush (37076)
£79.98
Important compatibility info
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 850 mm |
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Weight | 7.2 kg |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023