Important compatibility info
Weight | 2.14 kg |
Material | Cast Aluminium |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.12 kg |
Width of castor bearing surface | 25 mm |
Material | Plastic |
Outer diameter | 65 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | ACM (Polyacrylate) |
Outer diameter | 71 mm |
Thickness | 7 mm |
Inner diameter | 57 mm |
Function | Shaft Seal, manual transmission flange |
Type | Shaft Seal, manual transmission flange |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Placement on Vehicle | Rear |
Inner diameter | 30 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
for OE number | 26 12 1 229 682 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 55 mm |
Outer diameter | 47.3 mm |
Inner diameter | 14 mm |
Weight | 0.360 kg |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, Lower, Centre, Rear Axle Right |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.530 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 5WA 199 262 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.960 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 43 mm |
Outer diameter | 76 mm |
Inner diameter | 43 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information | with retaining rings, with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 350 mm |
Height | 50 mm |
Diameter | 21.8 mm |
Material | Steel |
Thickness | 50 mm |
Spanner Size | 15 |
Rod/Strut | Coupling Rod |
Thread Length | 21 mm |
Weight | 0.469 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 31 33 6 788 776 S2 |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Repair Kit, suspension strut support mount |
Weight | 0.93 kg |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Nut (173448)
- 1x Febi Nut (34653)
- 1x Febi Repair Kit, suspension strut support mount (102403)
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Steering arm type | Control Arm |
Paired article numbers | 177841 |
Weight | 1.925 kg |
Cone Size | 19.3 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Accessory Kit, disc brake pad |
Function | Accessory Kit, disc brake pad |
Weight | 0.041 kg |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Iron |
Placement on Vehicle | Front Axle Right |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181960 |
Brake caliper piston diameter | 60 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 6.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 85 mm |
Material | Thermoplast |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 78 mm |
Function | Bellow, drive shaft |
Weight | 0.2 kg |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Grey Cast Iron |
Function | Wheel Brake Cylinder |
Weight | 0.35 kg |
Piston Diameter | 17.5 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Weight | 2.5 kg |
Placement on Vehicle | Front Axle |
Length | 159.9 mm |
Width | 64.1 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.60 kg |
Placement on Vehicle | Rear Axle |
Length | 136.9 mm |
Width | 63.1 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.8 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.51 kg |
Length | 279 mm |
Height | 54 mm |
Width | 218 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.053 kg |
Function | Lock Cylinder |
Lock System | with two keys |
Type | Lock Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Master Cylinder |
Outer diameter | 22.2 mm |
Weight | 1.25 kg |
Type | Brake Master Cylinder |
for OE number | 4601.E4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 60 mm |
Adjustable | Adjustable on one side |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Placement on Vehicle | Front Axle, outer |
Length | 1052 mm |
Additional Information 2 | with crown nut |
Steering arm type | Control Arm |
Rod/Strut | Push Rod |
Weight | 11.794 kg |
Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023