Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 776 mm. 726 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 32 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on both sides |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Length | 860 mm. 750 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Thickness | 55.43 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Length | 316 mm |
| Eject Force | 2010 N |
| Housing Diameter | 35 mm |
| Stroke | 71 mm |
| Mounting points diameter | 19 mm |
| Housing length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| for OE number | 55258509 S1 |
| Number of Chain Links | 142 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (177735)
- 1x Febi Tensioner, timing chain (178345)
- 1x Febi Guide, timing chain (177195)
- 1x Febi Guide, timing chain (178384)
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 99.1 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| External Teeth, Wheel Side | 35 |
| Min. Length | 1144 mm |
| External Teeth, Diff.Side | 41 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Transmission-side joint diameter | 75.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 83 mm |
| External Teeth, Wheel Side | 29 |
| Paired article numbers | 184707 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 26 |
| Min. Length | 941 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information 2 | with bolts/screws, with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 27 |
| Number of Teeth, ABS ring | 48 |
| Min. Length | 595 mm |
| ABS Ring Diameter | 83 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 96 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cylinder Head Gasket Set, air compressor |
| Type | Cylinder Head Gasket Set, air compressor |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023









