Important compatibility info
Weight | 0.135 kg |
Thread Length | 11.3 mm |
Function | Brake Hose |
Length | 453 mm |
Spanner Size | 15 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Water Pump, engine cooling |
Weight | 1.05 kg |
Number of Wings | 7 |
Additional Information 2 | non-switchable water pump |
Function | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Seal Material | Paper |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.079 kg |
Placement on Vehicle | Front Axle, Upper, Lower |
Width | 31 mm |
Material | Rubber/Metal |
Outer diameter | 44 mm |
Inner diameter | 17 mm |
Function | Mounting Kit, stabiliser bar |
Multi-piece | Two-piece |
Type | Mounting Kit, stabiliser bar |
Replaces | 105709; 105879 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.50 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27074 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of mounting bores | 3 |
Function | Central Slave Cylinder, clutch |
Weight | 0.320 kg |
Replaces | 34935; 36304; 40957 |
Type | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.360 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (27847)
- 2x Febi Protective Cap/Bellow, shock absorber (28529)
Important compatibility info
External Thread Size | M12 x 1,5 |
Length | 61 mm |
Spanner Size | 19 |
Colour | Grey |
Number of Connectors / Ports | 2 |
Weight | 0.023 kg |
Function | Sensor, coolant temperature |
Screw length below head | 28 mm |
Type | Sensor, coolant temperature |
Additional Information 2 | with seal ring |
Replaces | 23467 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 90 mm |
Inner diameter | 13 mm |
Colour | Green |
Outer diameter 1 | 71 mm |
Outer diameter 2 | 85 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Weight | 0.48 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.2 kg |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Width | 50 mm |
Outer diameter | 265.2 mm |
Thickness | 69.2 mm |
Inner diameter | 230 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 57 mm |
Number of mounting bores | 1 |
Max.skimmed drum measure | 231 mm |
Function | Brake Drum |
Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Lower |
Length | 44 mm |
Width | 33 mm |
Material | Rubber |
Thickness | 23.5 mm |
Weight | 0.035 kg |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 182 mm |
Function | Cable Pull, parking brake |
Weight | 0.043 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Throttle body |
Voltage | 12 V |
Weight | 0.769 kg |
Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Length | 242 mm |
Internal Thread Size | M10 x 1 |
Function | Brake Hose |
Spanner Size | 11 |
Paired article numbers | 170866 |
External Thread Size | M10 x 1 |
Weight | 0.180 kg |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 23 mm |
Additional Information 2 | without seal ring |
External Thread Size | M14 x 1,5 |
Screw length below head | 14 mm |
Function | Screw Plug, oil sump |
Type | Screw Plug, oil sump |
Bolt Head/Nut Design | Male Hex |
Weight | 0.04 kg |
Thread Length | 14 mm |
Surface | Zinc-coated |
Spanner Size | 22 |
Material | Steel |
Outer diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 34233 |
Placement on Vehicle | Front Axle Left, Lower |
Weight | 3.502 kg |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (27073)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (34238)
Important compatibility info
Weight | 0.320 kg |
Material | Metal |
Outer diameter | 76 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.477 kg |
Number of mounting bores | 3 |
for OE number | 56 79 352 |
Type | Central Slave Cylinder, clutch |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.99 kg |
Colour | Brown |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 56 84 654 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Material | Plastic |
Function | Cap, coolant tank |
Opening Pressure | 1.4 bar |
for OE number | 92 02 799 |
Colour | Yellow |
Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 120 mm |
Inner diameter | 15 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Weight | 0.790 kg |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 49 mm |
Additional Information 2 | without ball bearing |
for OE number | 03 44 544 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023