Important compatibility info
Outer diameter | 345 mm |
Function | Brake Disc |
Centering Diameter | 70 mm |
Minimum thickness | 27.5 mm |
Brake Disc Thickness | 30 mm |
Height | 45.2 mm |
Number of Holes | 7 |
Rotor Style | Vented |
Surface | Coated |
Type | Brake Disc Rotor |
Quantity | 1 |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |
Important compatibility info
Length | 236 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Type | with internal thread |
Important compatibility info
Mounting Type | Bolted |
Bore Diameter 2 | 22 mm |
Number of Rivet Holes | 3 |
Thread Measurement 1 | M16x1.5 |
Bore Diameter | 12.2 mm |
Bore Diameter 1 | 19.4 mm |
Function | Ball Joint |
Additional Information 2 | without bolts/screws |
Number of mounting bores | 3 |
Type | Ball Joint |
Steering arm type | for control arm |
Important compatibility info
Hub Profile | 23 x 20.1 |
Outer diameter | 225 mm |
Engine Version | for engines with dual-mass flywheel |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 3 -part |
Number of Teeth | 20 |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Placement on Vehicle | Front Axle |
Type | Accessory Kit, disc brake pad |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 24 mm |
Important compatibility info
Number of Parts | 3 -part |
Number of Teeth | 24 |
Hub Profile | 26 x 24.1 |
Outer diameter | 225 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Number of pads | 4 |
Wear Warning Contact | prepared for wear warning indicator |
Number of Springs | 2 |
Function | Brake Pad Set, disc brake |
Thickness/Strength 2 | 19 mm |
Thickness/Strength 1 | 18 mm |
Brake System | Ate - Teves |
Type | Brake Pad Set, disc brake |
Height 1 | 65.5 mm |
Width 1 | 193.2 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Additional Information | with gaskets/seals |
Housing Type | without housing |
Function | Thermostat, coolant |
Opening Temperature | 80 °C |
Type | Thermostat, coolant |
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6313 |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6626 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5562)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6920)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6878)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6900 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 98 mm |
Inner diameter 2 | 86 mm |
Inner diameter 1 | 27 mm |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 230 mm |
Thread Size | M14x1.5 |
Thread Measurement 1 | M14x1.5 |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 99 mm |
Inner diameter 2 | 65 mm |
Inner diameter 1 | 25 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 65 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6985 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Length | 1170 mm |
Function | Tie Rod |
Type | Tie Rod |
Placement on Vehicle | Front Axle |
Important compatibility info
Thread Measurement 2 | M12x1.75 |
Thread Size | M12x1.75 |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Length | 304 mm |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Length | 136 mm |
Height | 130 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Inner diameter | 11 mm |
Type | Mounting, engine |
Placement on Vehicle | Upper Right |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023