Important compatibility info
Weight | 0.735 kg |
Height | 183 mm |
Filter type | Spin-on Filter, with water separator |
Function | Fuel filter |
Internal Thread Size | M20 x 1,5 |
Type | Fuel filter |
Outer diameter | 96 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 0.620 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 109 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.110 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 94 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03335)
- 1x Febi Spring Washer (03336)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Core Depth | 42 mm |
Core Width | 370 mm |
Core Length | 188 mm |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Weight | 1.048 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Bore Diameter | 35 mm. 21 mm |
Weight | 5.000 kg |
Type | Link/Coupling Rod, stabiliser bar |
Diameter | 1 mm |
Length | 365 mm |
Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, boost pressure |
Weight | 0.039 kg |
Number of Connectors / Ports | 4 |
Type | Sensor, boost pressure |
for OE number | 51.27421.0169 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Roll-off Piston, air suspension bellows |
Function | Roll-off Piston, air suspension bellows |
Placement on Vehicle | Rear Axle |
Material | Metal |
Outer diameter | 190 mm |
Thickness | 156 mm |
Colour | Black |
Internal Thread Size | M18 x 1,5 |
Weight | 3.93 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Right |
Length | 120 mm |
Thickness | 78 mm |
Spanner Size | 19 |
Paired article numbers | 38947 |
Function | Tie Rod End |
Internal Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Internal Thread Size | M14 x 1,5 |
Length | 160 mm |
Width | 47 mm. 65 mm |
Colour | Black |
Driver Position | for right-hand drive vehicles |
Number of Connectors / Ports | 4 |
Function | Gear Shift Lever Knob |
Type | Gear Shift Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.634 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 23.8 mm |
Paired article numbers | 176066 |
Steering arm type | Control Arm |
Material | Aluminium |
Additional Information 2 | with ball joint |
Placement on Vehicle | Front Axle Right, Lower, Rear |
External Thread Size | M16 x 1,5 |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M8 x 1,25 |
Material | Steel |
Extra Description | ProKit |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.18 kg |
Colour | Silver |
Rod/Strut | Coupling Rod |
Spanner Size | 13 |
Additional Information 2 | with nut, with washers |
Type | Link/Coupling Rod, stabiliser bar |
Thread Length | 30 mm |
Length | 146 mm |
Placement on Vehicle | Rear Axle |
Thickness | 32 mm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
for OE number | 51815759 |
Placement on Vehicle | Rear |
Weight | 0.503 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 277 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.450 kg |
Function | Inner Tie Rod |
Internal Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 171 mm |
Thickness | 92 mm |
Weight | 0.8 kg |
Spanner Size | 22 |
Paired article numbers | 41322 |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Right |
External Thread Size | M22 x 1,5, M14 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Cupholder |
Type | Cupholder |
Weight | 0.12 kg |
Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate), PC (Polycarbonate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 227 mm |
Height | 33 mm |
Function | Air Filter |
Width | 168 mm |
Filter type | Filter Insert |
Weight | 0.140 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Material | Rubber/Metal |
Outer diameter | 33 mm |
Thickness | 54 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Weight | 0.38 kg |
Type | Ball Joint |
Function | Ball Joint |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.205 kg |
Voltage | 12 V |
Operating Mode | Electric-pneumatic |
Function | Boost Pressure Control Valve |
Number of Connectors / Ports | 2 |
Type | Boost Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 12.1 mm |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 17.5 mm |
Weight | 0.87 kg |
External Thread Size | M14 x 1,5, M12 x 1,25 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023