Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 84.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 947 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Type | Joint, propshaft |
| Inner diameter | 12 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.96
Important compatibility info
| Bore Diameter | 29 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| for OE number | 20835246 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.96
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.94
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Inner diameter | 85 mm |
| Outer diameter | 105 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Width | 160 mm |
| Placement on Vehicle | transmission sided |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.94
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Material | Rubber/Metal |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.94
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 48.7 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.89
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Transmission Type | 6-Speed Manual Transmission |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Transmission ID | 711.680 |
| Inner length 1 | 1478 mm |
| Inner length 2 | 1153 mm |
| Outer length 1 | 1493 mm |
| Outer length 2 | 1245 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.89
Important compatibility info
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 108212 |
| Brake Disc Thickness | 36 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Left |
| Thickness | 66.2 mm |
| Outer diameter | 374 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.87
Important compatibility info
| Thickness | 66.2 mm |
| Brake Disc Thickness | 36 mm |
| Centering Diameter | 75 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 374 mm |
| Paired article numbers | 108211 |
| Rotor Style | Internally Vented |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.87
Important compatibility info
| Outer diameter | 70 mm. 73.5 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.84
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Paired article numbers | 183362 |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.84
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21740 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21735)
£79.79
Important compatibility info
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 84 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Min. Length | 592 mm |
| External Teeth, Diff.Side | 40 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.78
Important compatibility info
| for OE number | 213 240 06 00 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.77
Important compatibility info
| Number of Connectors / Ports | 5. 3 |
| Function | Fuel Feed Unit |
| Additional Information | with gasket/seal, with fuel sender unit |
| Type | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.76
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Rated Power | 9 W |
| Valve type | Solenoid Valve |
| Pressure | 10 bar |
| Function | Solenoid Valve |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.70
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 300 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.70
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Thickness | 51 mm |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.70
Important compatibility info
| Type | Condenser, air conditioning |
| Core Length | 421 mm |
| Refrigerant | R 134a |
| Core Depth | 16 mm |
| Core Width | 545 mm |
| Function | Condenser, air conditioning |
| Additional Information 2 | without dryer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.65
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.65
Important compatibility info
| Placement on Vehicle | Left, Right |
| Chain Type | Silent Chain, with chain lock |
| Number of Chain Links | 122 |
| Timing Chain Size | Z53AI-3 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.64
Important compatibility info
| Parameter | VL120R |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.62
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 73 mm |
| Outer diameter | 81 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Inner diameter | 27 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Outer diameter 1 | 63 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 2 | 136 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.59
Important compatibility info
| Length | 416 mm |
| Outer diameter | 154 mm |
| Capacity | 6 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Number of Connectors / Ports | 3 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.59
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump & Timing Belt Kit |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Number of Teeth | 141 |
| Width | 20 mm |
| Belts | with trapezoidal tooth profile |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (49436)
- 1x Febi Tensioner Pulley, timing belt (100779)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
- 1x Febi Water Pump, engine cooling (24528)
£79.56
Important compatibility info
| Placement on Vehicle | both sides, Rear |
| Inner diameter | 13 mm. 14 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.55
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.53
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | 11 23 257 42R |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.53
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 216 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023