Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Rod/Strut | Coupling Rod |
| Internal Thread Size | M30 x 1,5 |
| Function | Centre Rod Assembly |
| Additional Information | with lock nut |
| External Thread Size | M24 x 1,5 |
| Length | 935 mm |
| Extra Description | ProKit |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.01
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 76 mm |
| Track rollers material | Plastic |
| Function | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.01
Important compatibility info
| Number of Connectors / Ports | 4 |
| Ignition Coil | 4 Spark |
| Fastening Type | Four-point attachment |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Additional Information 2 | with plug, with cable |
| for OE number | 82 00 360 911 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.99
Important compatibility info
| Type | Repair Kit, kingpin |
| Outer diameter | 38 mm |
| Paired article numbers | 08511 |
| Additional Information 2 | with bearing |
| Additional Information | with Thrust Bearing |
| Length | 217 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (08512)
- 4x Febi Bush, steering knuckle (08513)
- 2x Febi Seal Ring, steering knuckle (08514)
- 1x Febi Pressure Piece, kingpin (01500)
- 1x Febi Springwasher (07583)
- 1x Febi Nut (02574)
- 1x Febi Bush, steering knuckle (04323)
- 1x Febi Lock Ring, steering knuckle (04325)
- 2x Febi Seal Ring, steering knuckle (04327)
- 1x Febi Lock Ring, steering knuckle (04326)
- 2x Febi Circlip (04328)
£79.99
Important compatibility info
| for OE number | 4M0 199 371 FE |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.99
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 593 mm |
| Core Width | 16 mm |
| Core Depth | 341 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.99
Important compatibility info
| Number of Chain Links | 42 |
| Placement on Vehicle | Upper |
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.99
Important compatibility info
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Length | 850 mm |
| Function | Centre Rod Assembly |
| Cone Size | 26 mm |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Length | 840 mm |
| Outer diameter | 10 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M28 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 175 mm |
| Inner diameter | 41 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Bearing Type | Tapered Roller Bearing |
| Width | 113 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with seal ring, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 154 mm |
| Surface | Coated |
| Inner diameter | 132 mm |
| Brake Disc Thickness | 30.2 mm |
| Brake Disc Type | Internally Vented |
| Thickness | 90 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M14 x 2 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.97
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.97
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 181 |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.97
Important compatibility info
| Type | Joint, propshaft |
| Inner diameter | 12 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Placement on Vehicle | Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.96
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.94
Important compatibility info
| Outer diameter | 194 mm. 129 mm |
| Thickness | 85.6 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 9 |
| Parameter | 5PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.94
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 250 W |
| Function | Interior Blower |
| Type | Interior Blower |
| Additional Information 2 | with cable, with bolts/screws |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.94
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Mounting, engine |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Material | Rubber/Metal |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.94
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 1000 mm |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| for OE number | 20889280 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.93
Important compatibility info
| Placement on Vehicle | Right |
| Material | Plastic |
| Colour | Black |
| Type | Exterior Door Handle |
| Function | Exterior Door Handle |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.93
Important compatibility info
| Placement on Vehicle | Front Axle, Right |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 194329 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.93
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.91
Important compatibility info
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Thread Length | 20 mm |
| Additional Information 2 | with crown nut |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Outer diameter | 52 mm |
| Length | 538 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.91
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 48.7 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.89
Important compatibility info
| Number of Holes | 6 |
| Inner diameter | 59 mm |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
| Outer diameter | 144 mm |
| Thickness | 30 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Replaces | 03659 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03486)
- 6x Febi Screw (21197)
- 6x Febi Washer (19107)
- 6x Febi Nut (19104)
£79.89
Important compatibility info
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.88
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 213 240 25 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.88
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M18 x 1,5 |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 635 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 88 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.88
Important compatibility info
| Outer diameter | 40 mm. 55 mm |
| Function | Repair Kit, kingpin |
| Length | 223 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10557)
£79.86
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.82
Important compatibility info
| Function | Oil Separator, crankcase ventilation |
| Number of hoses | 3 |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Additional Information | with venting hoses |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (44158)
- 1x Febi Hose, crankcase ventilation (100647)
- 1x Febi Hose, crankcase ventilation (100453)
- 1x Febi Hose, crankcase ventilation (100452)
£79.79
Important compatibility info
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 36 |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 84 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Min. Length | 592 mm |
| External Teeth, Diff.Side | 40 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.78
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 008 542 35 18 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.73
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 008 542 37 18 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.73
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 315 mm |
| Thickness | 80 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 111 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.71
Important compatibility info
| Placement on Vehicle | Front |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Max. Length | 379 mm |
| Min. Length | 282 mm |
| Pipe Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.70
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.69
Important compatibility info
| Additional Information | with gaskets/seals |
| Number of Connectors / Ports | 5 |
| for OE number | 25620-0R022 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.68
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 220 mm |
| Diameter | 1 mm |
| Additional Information | with nuts |
| Rod/Strut | Coupling Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 26 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.65
Important compatibility info
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm. 168 mm |
| Thickness | 260 mm. 430 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.64
Important compatibility info
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
| Mounting points diameter | 13 mm |
| Pipe Diameter | 58 mm |
| Min. Length | 380 mm |
| Max. Length | 600 mm |
| Piston conrod diameter | 25 mm |
| Type | Shock Absorber |
| External Thread Size | M12 x 1,25 |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.62
Important compatibility info
| Function | Repair Set, propshaft centre bearing |
| Type | Repair Set, propshaft centre bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (31851)
- 1x Febi Protective Cover, propshaft centre bearing (171015)
- 1x Febi Protective Cover, propshaft centre bearing (171017)
- 1x Febi Circlip (170445)
£79.58
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump & Timing Belt Kit |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Number of Teeth | 141 |
| Width | 20 mm |
| Belts | with trapezoidal tooth profile |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (49436)
- 1x Febi Tensioner Pulley, timing belt (100779)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
- 1x Febi Water Pump, engine cooling (24528)
£79.56
Important compatibility info
| Placement on Vehicle | both sides, Rear |
| Inner diameter | 13 mm. 14 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.55
Important compatibility info
| Length | 65 mm |
| Outer diameter | 29.2 mm |
| Spanner Size | 30 |
| Number of Connectors / Ports | 4 |
| Function | Oil Pressure Switch |
| Control Range | 0 - 7 bar |
| External Thread Size | M16 x 1,5 |
| Type | Oil Pressure Switch |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.53
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | 11 23 257 42R |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.53
Important compatibility info
| Additional Information | with nuts, with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40572 |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Left Rear, Lower |
| Material | Cast Steel |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36328)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
£79.52
Important compatibility info
| Min. Length | 582 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 186002 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.52
Important compatibility info
| Spanner Size | 32 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023