Important compatibility info
Type | Brake Drum |
Function | Brake Drum |
Rim Hole Number | 4 -Hole |
Max.skimmed drum measure | 230.2 mm |
Number of mounting bores | 1 |
Weight | 6.36 kg |
Centering Diameter | 63.6 mm |
Bolt Hole Circle Diameter | 108 mm |
Inner diameter | 227 mm |
Thickness | 63.6 mm |
Outer diameter | 250 mm |
Width | 51 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Fill quantity | 9.5 l |
Extra Description | ProKit |
Weight | 2.293 kg |
Type | Expansion Tank, coolant |
Additional Information | with coolant level sensor, with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (35035)
- 1x Febi Sensor, coolant level (35357)
- 1x Febi Cap, coolant tank (11562)
- 1x Febi Cap, coolant tank (45932)
Important compatibility info
Weight | 7.11 kg |
Type | Parts Set, maintenance service |
Function | Parts Set, maintenance service |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (30443)
- 1x Febi Oil Filter (45320)
- 1x Febi Fuel filter (31397)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
- 1x Febi Seal Ring (40687)
- 1x Febi Filter, cabin air (18541)
Important compatibility info
Weight | 0.804 kg |
Number of Ribs | 24 |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (106196)
- 1x Febi Gasket Set, oil cooler (105961)
- 1x Febi Gasket, oil cooler (105962)
Important compatibility info
Weight | 7.58 kg |
Function | Centre Rod Assembly |
Cone Size | 26 mm |
Pipe Diameter | 40 mm |
Rod/Strut | Push Rod |
Length | 940 mm |
Placement on Vehicle | Front Axle |
Extra Description | ProKit |
Type | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting bores distance | 78 mm |
Internal Thread Size | M16 x 1,5 |
Weight | 0.4 kg |
Function | Solenoid Valve, shift cylinder |
Type | Solenoid Valve, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 19.7 mm |
External Thread Size | M14 x 1,5 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 22.5 mm |
Paired article numbers | 183729 |
Weight | 1.714 kg |
Additional Information 2 | with ball joint |
Placement on Vehicle | Rear, Lower, Front Axle Right |
Additional Information | with lock nut, with rubber mounts |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 53 mm |
Outer diameter | 74 mm |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Weight | 3.16 kg |
Bearing Type | Angular Ball Bearing |
Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 19.8 mm |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 183727 |
Weight | 1.714 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Additional Information | with rubber mounts, with lock nut |
Placement on Vehicle | Rear, Lower, Front Axle Left |
Cone Size 2 | 22.5 mm |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.65 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Piston conrod diameter | 19 mm |
External Thread Size | M16 x 2 |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 381 mm |
Min. Length | 331 mm |
Pipe Diameter | 52 mm |
Mounting points diameter | 16 mm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts, with lock nut |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 22 mm |
Weight | 7.051 kg |
Steering arm type | Control Arm |
Paired article numbers | 181035 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Sealing lip material | NBR (nitrile butadiene rubber) |
Bearing Type | Angular Ball Bearing |
Outer diameter | 70 mm |
Placement on Vehicle | Front Axle |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Weight | 3.491 kg |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Inner diameter | 30 mm |
Width | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.300 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 51 mm |
Outer diameter | 90 mm |
Thickness | 82 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 120 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Outer diameter 2 | 143 mm |
Outer diameter 1 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rated Power | 1.1 kW |
Weight | 3.4 kg |
for OE number | 036 911 023 SX |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 93 mm |
Brake Disc Thickness | 34 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 122 mm |
Surface | Coated |
Number of Holes | 10 |
Mounting points diameter | 15 mm |
Function | Brake Disc |
Placement on Vehicle | Front Axle |
Weight | 16.7 kg |
Outer diameter | 335 mm |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with dryer |
Refrigerant | R 134a |
Weight | 2.004 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 374 mm |
Core Width | 583 mm |
Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 103.45 mm |
Operating pressure to | 10 bar |
Number of Connectors / Ports | 2 |
Width | 42.45 mm |
Voltage | 24 V |
Weight | 0.429 kg |
Function | Solenoid Valve |
Valve type | Solenoid Valve |
Internal Thread Size | M12 x 1,5 |
Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Weight | 7.550 kg |
Paired article numbers | 174693 |
Steering arm type | Control Arm |
Inner diameter | 16 mm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.54 kg |
Length | 156 mm |
Width | 71 mm. 57 mm |
Inner diameter | 4 mm |
Number of Connectors / Ports | 4 |
Colour Coding | Yellow, Red, Black, White |
Function | Gear Lever Knob |
Type | Gear Lever Knob |
External Thread Size | M42 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Function | Window Regulator |
Additional Information | with fastening/mounting material, without electric motor |
Placement on Vehicle | Right Front |
Type | Window Regulator |
Weight | 1.0 kg |
Paired article numbers | 176900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023