Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 865 mm |
| ABS Ring Diameter | 85 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.95
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 190 |
| Function | Water Pump & Timing Belt Kit |
| Belts | with trapezoidal tooth profile |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23655)
- 1x Febi Water Pump, engine cooling (14229)
£78.95
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 600 mm |
| Spanner Size | 17 |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| for OE number | 21542714 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.94
Important compatibility info
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Length | 278 mm |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185207 |
| Camber correction | 0.5 ° |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.93
Important compatibility info
| Placement on Vehicle | Left, Steering arm side |
| Length | 222.5 mm |
| Outer diameter | 50 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 2x Febi Lock Ring, steering knuckle (35014)
- 4x Febi Bush, steering knuckle (08524)
- 2x Febi Circlip (05370)
- 2x Febi Seal Ring, steering knuckle (05868)
- 1x Febi Bush, steering knuckle (15890)
£78.92
Important compatibility info
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 50 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.92
Important compatibility info
| Operating Mode | Electric |
| Function | Window Regulator |
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Right Front |
| Type | Window Regulator |
| Paired article numbers | 176900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.90
Important compatibility info
| for OE number | 03C 115 105 N SK |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.89
Important compatibility info
| Brake caliper piston diameter | 43 mm |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182709 |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.89
Important compatibility info
| Brake caliper piston diameter | 43 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.89
Important compatibility info
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 41 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 183209 |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.89
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 11 37 520 39R |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.88
Important compatibility info
| Number of Wings | 9 |
| Water pump impeller material | Metal |
| Housing material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.85
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 708 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Adjustable | not adjustable |
| Pipe Diameter | 36 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.85
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1915 mm. 745 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.84
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 395 mm |
| Core Width | 675 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.83
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 51855484 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.82
Important compatibility info
| for OE number | 038 103 469 AD |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.82
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 269 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.80
Important compatibility info
| Placement on Vehicle | Left |
| for OE number | 22 11 6 883 513 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.80
Important compatibility info
| Length | 120 mm |
| Width | 105 mm. 80 mm |
| Inner diameter | 6.5 mm |
| Function | Pump, fuel pre-supply |
| Internal Thread Size | M14 x 1,5 |
| Type | Pump, fuel pre-supply |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.79
Important compatibility info
| Core Length | 164 mm |
| Core Width | 179 mm |
| Additional Information | with gasket/seal |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Depth | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.79
Important compatibility info
| Placement on Vehicle | Right Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 339 mm |
| Min. Length | 242 mm |
| Pipe Diameter | 44.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M6 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.78
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 310 mm |
| Housing Diameter | 35 mm |
| Eject Force | 930 N |
| Stroke | 94 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 180.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.77
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Minimum thickness | 28.4 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 73.2 mm |
| Outer diameter | 370 mm |
| Rotor Style | perforated/vented |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.77
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| for OE number | 22 11 6 875 632 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.77
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| for OE number | 02T 911 023 EX |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.75
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 120 |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Function | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19540)
- 1x Febi Tensioner Pulley, timing belt (21706)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (21708)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178790)
£78.75
Important compatibility info
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.73
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 340 mm |
| Min. Length | 280 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.71
Important compatibility info
| Number of grooves | 5 |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.71
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Outer diameter | 40 mm. 60 mm |
| Function | Repair Kit, kingpin |
| External Thread Size | M40 x 1,5 |
| Type | Repair Kit, kingpin |
| Additional Information 2 | without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, kingpin (29495)
- 1x Febi Castle Nut (29497)
- 1x Febi Kingpin (29486)
- 1x Febi Repair Kit, kingpin (29768)
£78.70
Important compatibility info
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
| Opening Temperature 2 up to | 110 °C |
| Opening Temperature 2 from | 95 °C |
| Opening Temperature 1 up to | 95 °C |
| Opening Temperature 1 from | 80 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.68
Important compatibility info
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Thread Length | 20 mm |
| Additional Information 2 | with crown nut |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Outer diameter | 52 mm |
| Length | 538 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.68
Important compatibility info
| Placement on Vehicle | Lower, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.64
Important compatibility info
| Function | Air Tank, compressed-air system |
| Operating Pressure | 15 bar |
| Outer diameter | 246 mm |
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
| Type | Air Tank, compressed-air system |
| Length | 379 m |
| Capacity | 15 l |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.62
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.61
Important compatibility info
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.60
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.58
Important compatibility info
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Brake Disc Thickness | 22 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Centering Diameter | 68 mm |
| Number of mounting bores | 1 |
| for OE number | 8K0 615 601 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.55
Important compatibility info
| Additional Information | with fastening/mounting material |
| Length | 244 mm |
| Hole Spacing | 201 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Rolling Bearing |
| Inner diameter | 60 mm |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.54
Important compatibility info
| Additional Information 2 | with integrated oil separator, with dryer |
| Operating Pressure | 15 bar |
| Type | Air Dryer, compressed-air system |
| Function | Air Dryer, compressed-air system |
| Internal Thread Size | M12 x 1,50, M22 x 1,50, M16 x 1,50 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Dryer, compressed-air system (193862)
- 1x Febi Air Dryer Cartridge, compressed-air system (34322)
£78.54
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 42.8 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.52
Important compatibility info
| Parameter | VL100R-M40 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.49
Important compatibility info
| Rim Hole Number | 8 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 102.5 mm |
| Brake Disc Thickness | 18.2 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 150 mm |
| Centering Diameter | 110 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.49
Important compatibility info
| for OE number | 81.30550.0082 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.49
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 83 |
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (40563)
- 1x Febi Tensioner Pulley, timing belt (30221)
£78.47
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 52.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.47
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Type | Mounting, engine |
| Replaces | 108110 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.46
Important compatibility info
| Rotor Style | perforated/vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 54 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.46
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023