Important compatibility info
Weight | 4.590 kg |
Paired article numbers | 193437 |
Placement on Vehicle | Rear Axle Left |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Outer diameter | 85 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Function | Wheel Bearing Kit |
Inner diameter | 30 mm |
Width | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Driver Position | for right-hand drive vehicles |
Length | 861 mm |
Cone Size | 28.6 mm |
Function | Centre Rod Assembly |
Pipe Diameter | 52 mm |
Rod/Strut | Push Rod |
Outer diameter | 52 mm |
Weight | 9.1 kg |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Placement on Vehicle | Front Axle |
Length | 980 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Weight | 8.6 kg |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 2 kW |
Weight | 4.0 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Weight | 2.45 kg |
Operating Mode | Manual |
Function | Tilt Pump, driver cab |
Number of Connectors / Ports | 2 |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.764 kg |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 30 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.9 kg |
Type | Seal Kit, multi-valve |
Function | Seal Kit, multi-valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 164 mm |
Outer diameter | 57 mm |
Function | Joint, propshaft |
Weight | 5.65 kg |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Paired article numbers | 180251 |
Weight | 1.1 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.630 kg |
Placement on Vehicle | Right Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 339 mm |
Min. Length | 242 mm |
Pipe Diameter | 44.5 mm |
Mounting points diameter | 12 mm |
Piston conrod diameter | 12.5 mm |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M6 x 1 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M30 x 1,5 RHT |
Weight | 9.430 kg |
Placement on Vehicle | Front Axle |
Function | Centre Rod Assembly |
Colour | red/brown |
Length | 901 mm |
Outer diameter | 50 mm |
Pipe Diameter | 50 mm |
Cone Size | 30 mm |
Rod/Strut | Push Rod |
External Thread Size | M24 x 1,5 |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.211 kg |
for OE number | 038 103 469 AD |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Extra Description | febi Plus |
Function | Cylinder Head Cover |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 327 mm |
Inner diameter | 217 mm |
Height | 605 mm |
Filter type | Filter Insert |
Weight | 5.570 kg |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Placement on Vehicle | Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 181418 |
Weight | 5.316 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.294 kg |
Type | Tensioner, timing chain |
Function | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without electric motor |
Placement on Vehicle | Right Front |
Function | Window Regulator |
Type | Window Regulator |
Weight | 1.1 kg |
Paired article numbers | 175681 |
Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with adjuster |
Weight | 0.56 kg |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.625 kg |
Length | 1050 mm |
Material | Rubber |
Thickness | 18 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
for OE number | 12 41 7 501 738 |
Weight | 3.9 kg |
Rated Power | 1.4 kW |
Type | Starter |
Number of Teeth | 9 |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Weight | 7.1 kg |
Placement on Vehicle | Front Axle |
Length | 872 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023