Proud to be a UK-based company
Contact us
Important compatibility info
| Vehicle Equipment | for vehicles without start-stop function |
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.4 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.44
Important compatibility info
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| for OE number | 0361.N4 |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.41
Important compatibility info
| Additional Information 2 | without spacer plate |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.41
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 181035 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.41
Important compatibility info
| Placement on Vehicle | both sides |
| Cable Length | 800 mm. 1200 mm |
| Number of circuits | 31 |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.39
Important compatibility info
| Number of Connectors / Ports | 2. 4 |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.36
Important compatibility info
| Rotor Style | Internally Vented |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Outer diameter | 327 mm |
| Thickness | 73 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.35
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 1390082080 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.34
Important compatibility info
| Function | Fifth Wheel Kingpin |
| Diameter | 2 Inch |
| Fulfils ECE norm | E1 R55 |
| Type | Fifth Wheel Kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.32
Important compatibility info
| Outer diameter | 61 mm |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Housing length | 96 mm |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.32
Important compatibility info
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 38 mm |
| Outer diameter 1 | 70 mm |
| Outer diameter 2 | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.31
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.31
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with crown nut |
| Adjustable | adjustable |
| Pipe Diameter | 48 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5, M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.31
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 32 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Inner Brake Drum Diameter | 200 mm |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
| Thickness/Strength 1 | 6.5 mm |
| Outer diameter | 202.08 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.30
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 24 |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Transmission-side joint diameter | 83 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.27
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182004 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.26
Important compatibility info
| Width | 27 mm |
| Outer diameter | 155 mm |
| Inner diameter | 15 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (34825)
- 1x Febi Pulley Bolt (33681)
£78.25
Important compatibility info
| Operating Mode | Hydraulic |
| Spanner Size | 19 |
| Function | Tensioner, timing chain |
| for OE number | 271 050 09 11 |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 245 mm. 420 mm |
| Outer diameter | 228 mm. 197 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.23
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174693 |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.21
Important compatibility info
| Outer diameter | 140 mm |
| Inner diameter | 54 mm |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Rear |
| Bolt Hole Circle Diameter | 105 mm |
| Thickness | 41 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts, with bush |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26294)
- 1x Febi Centering Sleeve, propshaft (171154)
- 3x Febi Screw (40846)
- 3x Febi Nut (43511)
- 3x Febi Screw (40942)
£78.18
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 488 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Max. Length | 810 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.17
Important compatibility info
| Inner length 2 | 900 mm |
| Inner length 1 | 850 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1117 mm |
| Outer length 2 | 1221 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.16
Important compatibility info
| Number of Connectors / Ports | 5. 3 |
| Function | Fuel Feed Unit |
| Additional Information | with gasket/seal, with fuel sender unit |
| Type | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.16
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Rated Power | 204 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.16
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Additional Information | with rubber mounts, with lock nut |
| Paired article numbers | 181051 |
| External Thread Size | M16 x 1,5 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.16
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Belts | with rounded tooth profile |
| Number of Teeth | 104 |
| Surface | Coated |
| Function | Water Pump & Timing Belt Kit |
| Width | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173763)
- 1x Febi Water Pump, engine cooling (17340)
£78.15
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Rod/Strut | Guide Rod |
| Function | Rod/Strut, wheel suspension |
| Extra Description | ProKit |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rod/Strut, wheel suspension (24211)
- 2x Febi Control/Trailing Arm, wheel suspension (23047)
- 2x Febi Bushing, axle beam (22699)
- 8x Febi Screw (29451)
- 8x Febi Nut (30005)
- 4x Febi Screw (32624)
£78.10
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.09
Important compatibility info
| Outer diameter | 276 mm |
| Capacity | 40 l |
| Operating Pressure | 15.5 bar |
| Internal Thread Size | M22 x 1,5 |
| Length | 758 mm |
| Function | Air Tank, compressed-air system |
| Material | Steel |
| Number of Connectors / Ports | 4 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.08
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.08
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 351 mm |
| Core Width | 628 mm |
| Core Depth | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.07
Important compatibility info
| Extra Description | febi Plus |
| Type | Pipe, EGR valve |
| Function | Pipe, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.06
Important compatibility info
| Heating / Cooling | with jiggle pin |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| for OE number | 03L 103 469 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.04
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 212 240 01 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.03
Important compatibility info
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 81.4 mm |
| Thread Size | M22x1,5 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 86 mm |
| Min. Length | 975 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.03
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 544 mm |
| Wheel Sided Joint Diameter | 93.1 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Air Suspension Valve |
| Internal Thread Size | M12 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.02
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174692 |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.02
Important compatibility info
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 182166 |
| Steering arm type | Control Arm |
| Additional Information 2 | without ball joint |
| Cone Size | 26 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.02
Important compatibility info
| Outer diameter | 70 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Function | Timing Chain Kit |
| Number of Chain Links | 144 |
| Chain Type | Simplex, Closed chain |
| Type | Timing Chain Kit |
| for OE number | 0816.H9 S1 |
| Timing Chain Size | G53HP, G53HR, 53RING |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Tensioner, timing chain (49552)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (49553)
£78.01
Important compatibility info
| Paired article numbers | 174782 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Left, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 150 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | Z46-16 |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48577)
- 1x Febi Tensioner, timing chain (40379)
- 1x Febi Guide, timing chain (36631)
- 1x Febi Guide, timing chain (36632)
- 1x Febi Pulley Bolt (32025)
- 1x Febi Shaft Seal, crankshaft (38238)
- 1x Febi Bolt, camshaft gear (46364)
£78.01
Important compatibility info
| Number of Teeth | 134 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| for OE number | 16 107 934 80 |
| Additional Information | with fastening/mounting material |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26717)
- 1x Febi Water Pump, engine cooling (19068)
£78.01
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Colour | red/brown |
| Length | 901 mm |
| Outer diameter | 50 mm |
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 143 mm |
| Outer diameter | 88 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Additional Information | with axle nut, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (102836)
- 4x Febi Screw (24563)
- 1x Febi Nut, kingpin (37109)
£78.00
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Length | 910 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Function | Wheel Bearing Kit |
| Inner diameter | 33 mm |
| Width | 67 mm |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter | 91 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174064)
- 1x Febi Split Pin (173993)
£78.00
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023