Important compatibility info
| Height | 43 mm |
| Function | Water Pump, engine cooling |
| Number of Wings | 8 |
| Number of Teeth | 29 |
| Impeller Diameter | 61 mm |
| Water Pump Pulley Diameter | 45 mm |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
Important compatibility info
| Width | 75 mm |
| Diameter | 16 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Outer diameter | 12 mm |
| Inner diameter | 10 mm |
| Length | 120 mm |
| Type | Mounting, engine |
| Placement on Vehicle | Front |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6718 |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7574 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | not prepared for wear warning indicator |
| Thickness/Strength 1 | 20.2 mm |
| Brake System | Ate - Teves |
| Thickness/Strength 2 | 19.7 mm |
| Number of pads | 4 |
| Number of Springs | 2 |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Height 1 | 76.3 mm |
| Width 1 | 193.2 mm |
| Width 2 | 194.4 mm |
| Placement on Vehicle | Front Axle |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 278 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 67.7 mm |
| Minimum thickness | 8 mm |
| Brake Disc Thickness | 10 mm |
| Height | 41.4 mm |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Additional Information 2 | with bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Paired article numbers | FSM5549 |
Additional Information
- 1x Borg & Beck Suspension Strut Support Mount (BSM5548)
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5386)
Important compatibility info
| Inner diameter | 23.81 mm |
| Material | Cast Iron |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| Replaces | BES136 |
Important compatibility info
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Paired article numbers | FSM5460 |
| Inner diameter | 16 mm |
| Distance of fastening bolts | 95 mm |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
- 1x Borg & Beck Suspension Strut Support Mount (BSM5455)
- 1x Borg & Beck Rolling Bearing, suspension strut support mount (BSM5544)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 283 mm |
| Rotor Style | Vented |
| Number of Holes | 4 |
| Brake Disc Thickness | 26 mm |
| Height | 34 mm |
| Minimum thickness | 24 mm |
| Centering Diameter | 66 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
Important compatibility info
| Surface | Coated |
| Centering Diameter | 67 mm |
| Minimum thickness | 8.5 mm |
| Outer diameter | 284 mm |
| Brake Disc Thickness | 10 mm |
| Height | 51 mm |
| Number of Holes | 5 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Quantity Unit | Set |
| Replaced by | BBD5571 |
| Number of mounting bores | 2 |
Important compatibility info
| Thickness/Strength 1 | 16 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Width 2 | 80.4 mm |
| Inspection Tag | ECE R90 Homologated |
| Wear Warning Contact | prepared for wear warning indicator |
| Width 1 | 132 mm |
| Height 1 | 71.4 mm |
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7439 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5550)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7962)
- 1x Borg & Beck Mounting, control/trailing arm (BSK7963)
Important compatibility info
| Additional Information 2 | without bearing |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Paired article numbers | FSM5260 |
| Type | Suspension Strut Support Mount |
Important compatibility info
| Inner diameter 2 | 28 mm |
| Outer diameter | 120 mm |
| Number of Teeth, ABS ring | 86 |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter 1 | 28 mm |
| Bearing Code | Gen 2 |
Important compatibility info
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Length | 21 mm |
Important compatibility info
| Inner diameter 1 | 47 mm |
| Colour | Black |
| Material | PE (Polyethylene) |
| Inner diameter 2 | 50 mm |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 258 mm |
| Brake Disc Thickness | 10 mm |
| Height | 65 mm |
| Number of Holes | 5 |
| Rotor Style | Solid |
| Minimum thickness | 8 mm |
| Centering Diameter | 57 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Type | Brake Drum |
| Function | Brake Drum |
| Overall Height | 107 mm |
| Inner Brake Drum Height | 68 mm |
| Br. Drum outer diameter | 298 mm |
| Inner Brake Drum Diameter | 254 mm |
| Number of Holes | 5 |
| Placement on Vehicle | Rear Axle |
Important compatibility info
| Function | Central Slave Cylinder, clutch |
| Base body material | Plastic |
| Type | Central Slave Cylinder, clutch |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















