Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Cable Length | 800 mm |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Lambda Sensor | Diagnostic Probe |
| Type | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.20
Important compatibility info
| Number of Connectors / Ports | 5 |
| Valve head diameter | 17.3 mm |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.18
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 55 mm |
| Outer diameter | 96 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Inner diameter | 37 mm |
| Bolt Hole Circle Diameter | 160 mm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.16
Important compatibility info
| Additional Information | with nuts, with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40572 |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Left Rear, Lower |
| Material | Cast Steel |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36328)
- 1x Febi Bolt, control arm (37661)
- 1x Febi Bolt, control arm (37638)
- 2x Febi Nut (37412)
£78.15
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 581 mm |
| Wheel Sided Joint Diameter | 82.4 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.14
Important compatibility info
| Number of Ribs | 8 |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Length | 2080 mm |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29076)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£78.13
Important compatibility info
| Additional Information 2 | with dryer |
| Type | Condenser, air conditioning |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
| Core Length | 461 mm |
| Core Width | 593 mm |
| Function | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.13
Important compatibility info
| for OE number | 11360-JD01B |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.11
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.09
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 106 |
| Type | Timing Chain Kit |
| for OE number | 102 050 10 11 S7 |
| Timing Chain Size | D67ZN |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09231)
- 1x Febi Tensioner, timing chain (01050)
- 1x Febi Guide, timing chain (10331)
- 1x Febi Guide, timing chain (17072)
- 1x Febi Guide, timing chain (17073)
£78.08
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 008 542 35 18 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.08
Important compatibility info
| Outer diameter | 276 mm |
| Capacity | 40 l |
| Operating Pressure | 15.5 bar |
| Internal Thread Size | M22 x 1,5 |
| Length | 758 mm |
| Function | Air Tank, compressed-air system |
| Material | Steel |
| Number of Connectors / Ports | 4 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.08
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 177731 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Additional Information | with lock nut, with hydro mount |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (102986)
- 1x Febi Nut (43739)
£78.08
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 351 mm |
| Core Width | 628 mm |
| Core Depth | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.07
Important compatibility info
| Length | 65 mm |
| Outer diameter | 29.2 mm |
| Spanner Size | 30 |
| Number of Connectors / Ports | 4 |
| Function | Oil Pressure Switch |
| Control Range | 0 - 7 bar |
| External Thread Size | M16 x 1,5 |
| Type | Oil Pressure Switch |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.05
Important compatibility info
| Outer diameter | 194 mm. 129 mm |
| Thickness | 85.6 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 9 |
| Parameter | 5PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.05
Important compatibility info
| Thickness | 45 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.5 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Rotor Style | internally vented |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Surface | Coated |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.04
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 30 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 544 mm |
| Wheel Sided Joint Diameter | 93.1 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.03
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 4M0 199 371 GC |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Air Suspension Valve |
| Internal Thread Size | M12 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.02
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with holder |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 193265 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 620 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 20 |
| Min. Length | 650 mm |
| ABS Ring Diameter | 80 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 22 mm |
| Additional Information | with rubber mounts, with lock nut |
| Paired article numbers | 181051 |
| External Thread Size | M16 x 1,5 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Placement on Vehicle | Left |
| for OE number | 22 11 6 883 513 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Colour | red/brown |
| Length | 901 mm |
| Outer diameter | 50 mm |
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Length | 910 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.97
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Paired article numbers | 182627 |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Min. Length | 857 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 24 |
| Function | Drive Shaft |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.97
Important compatibility info
| Operating Mode | Hydraulic |
| Placement on Vehicle | Upper Left |
| Paired article numbers | 12511 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 106 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 154 mm |
| Surface | Coated |
| Inner diameter | 132 mm |
| Brake Disc Thickness | 30.2 mm |
| Brake Disc Type | Internally Vented |
| Thickness | 90 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M14 x 2 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Paired article numbers | 174782 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Left, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Length | 1666 mm |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (186518)
- 1x Febi Belt Tensioner, v-ribbed belt (36831)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£77.96
Important compatibility info
| for OE number | C2Z 29118 |
| Additional Information 2 | with lid |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Upper |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174783 |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 51 mm |
| Outer diameter | 90 mm |
| Thickness | 82 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter 2 | 143 mm |
| Outer diameter 1 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.95
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43761 |
| Inner diameter | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43760)
- 1x Febi Nut (39976)
£77.95
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Length | 605 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Capacity | 40 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.94
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Voltage | 12 V |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.94
Important compatibility info
| Placement on Vehicle | Lower |
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 68 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G68HS-9, G68HS-8 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49519)
- 1x Febi Tensioner, timing chain (49521)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
£77.94
Important compatibility info
| Number of Connectors / Ports | 3 |
| Voltage | 24 V |
| Type | Solenoid Valve |
| Function | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.91
Important compatibility info
| Height | 323 mm |
| Outer diameter | 147.2 mm |
| Additional Information 2 | with seal ring |
| Type | Filter, operating hydraulics |
| Function | Filter, operating hydraulics |
| Gasket outer diameter | 186.4 mm |
| Gasket inner diameter | 174.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.91
Important compatibility info
| Lock System | with double sealing |
| Number of Connectors / Ports | 8 |
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 179013 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.90
Important compatibility info
| Lock System | with double sealing |
| Operating Mode | Electric |
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178565 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.90
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 47 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 22.8 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 61 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.89
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Length | 1197 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.88
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Width | 25 mm |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 137 |
| Type | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Belt Material | Polyester |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24369)
- 1x Febi Water Pump, engine cooling (24528)
£77.88
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 406 mm |
| Number of circuits | 5 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.83
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023