Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 50 mm |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 30 mm |
| Weight | 4.227 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Replaces | 40651 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Weight | 3.386 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 59 mm |
| Outer diameter | 90 mm |
| Inner diameter | 22 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with screw set, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172328)
- 1x Febi Axle Bolt, drive shaft (104750)
£74.04
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 378 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 2.4 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 16 mm |
| Mounting points diameter | 14 mm |
| Min. Length | 332 mm |
| Pipe Diameter | 58 mm. 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 136 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 136 mm |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Inner diameter | 37 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Weight | 2.725 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Replaces | 31686 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Type | Thermostat, coolant |
| Opening Temperature | 91 °C |
| Outer diameter | 73 mm |
| Additional Information 2 | with seal ring |
| Weight | 0.21 kg |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Weight | 3.7 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 367 mm |
| Min. Length | 203 mm |
| Pipe Diameter | 41 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.320 kg |
| for OE number | 22448-4M500 |
| Type | Ignition Coil |
| Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Weight | 0.21 kg |
| Additional Information 2 | with seal ring |
| Opening Temperature | 87 °C |
| Outer diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Weight | 1.82 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 129 mm |
| Outer diameter | 129 mm |
| Thickness | 65 mm |
| Inner diameter | 25 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Weight | 6.82 kg |
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Front Axle |
| Length | 450 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Number of Connectors / Ports | 5 |
| Weight | 0.04 kg |
| Type | Shift Selector Lever |
| Function | Shift Selector Lever |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36329 |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 14 mm |
| Placement on Vehicle | Front Axle Left, Rear |
| Weight | 2.93 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (34175)
- 1x Febi Mounting, control/trailing arm (34176)
- 1x Febi Nut (36331)
£74.04
Important compatibility info
| Weight | 2.93 kg |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36328 |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 14 mm |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (34175)
- 1x Febi Mounting, control/trailing arm (34176)
- 1x Febi Nut (36331)
£74.04
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 2.141 kg |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43757 |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43756)
- 1x Febi Nut (39976)
£74.04
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.750 kg |
| for OE number | 009 542 17 18 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 672 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Seal Material | Metal, NBR (nitrile butadiene rubber) |
| Additional Information | with gasket/seal |
| Material | Cast Steel |
| Additional Information 2 | non-switchable water pump |
| Type | Water Pump, engine cooling |
| Number of Wings | 9 |
| Weight | 1.57 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Replaces | 100952 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 57 mm |
| Outer diameter | 78 mm |
| Additional Information 2 | with ABS sensor ring |
| Inner diameter | 46 mm |
| Weight | 1.470 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 19 mm |
| Pipe Diameter | 70 mm. 42 mm |
| Max. Length | 380 mm |
| Min. Length | 320 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Weight | 4.3 kg |
| Paired article numbers | 24419 |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1075 mm |
| Additional Information 2 | with top |
| Number of Ribs | 6 |
| Weight | 0.991 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28919)
- 1x Febi Belt Tensioner, v-ribbed belt (49426)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (14375)
£74.04
Important compatibility info
| for OE number | 81.30550.0054 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
| Weight | 2.096 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Width | 44 mm |
| Outer diameter | 127 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Weight | 1.65 kg |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31102)
- 1x Febi Pulley Bolt (33675)
£74.04
Important compatibility info
| Weight | 1.603 kg |
| Length | 1480 mm |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29125)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£74.04
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 32 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 1.783 kg |
| Outer diameter | 75 mm |
| Material | Metal |
| Width | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Weight | 0.33 kg |
| Length | 136 mm |
| Additional Information 2 | with switch |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 0.854 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Upper, Front, Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 154 mm |
| Surface | Coated |
| Inner diameter | 132 mm |
| Brake Disc Thickness | 30.2 mm |
| Brake Disc Type | Internally Vented |
| Thickness | 90 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Weight | 14.0 kg |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M14 x 2 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.9 kW |
| Weight | 3.06 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Weight | 0.190 kg |
| Fill Medium | Brake Fluid |
| Type | Master Cylinder, clutch |
| Function | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
Important compatibility info
| Weight | 1.2 kg |
| Function | Ball Joint, axle strut |
| Type | Ball Joint, axle strut |
| Inner diameter | 20 mm |
| Rod/Strut | Guide Rod |
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.04
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023