Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Weight | 3.047 kg |
| Paired article numbers | 187796 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 15.7 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 43762 |
| Weight | 2.116 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43759)
- 1x Febi Nut (39976)
£75.03
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Min. Length | 973 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 9.376 kg |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 81.5 mm |
| Paired article numbers | 184556 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Weight | 4.574 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 34 mm |
| Placement on Vehicle | Front Axle |
| Width | 92 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter | 102 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.317 kg |
| Type | Pipe, EGR valve |
| Function | Pipe, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 0.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 630 mm |
| Min. Length | 399 mm |
| Stroke | 231 mm |
| Pipe Diameter | 32 mm. 28 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber, steering |
| Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Additional Information | with rubber mounts, with lock nut |
| External Thread Size | M16 x 1,5 |
| Weight | 2.116 kg |
| Placement on Vehicle | Front Axle Right, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 43761 |
| Inner diameter | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43760)
- 1x Febi Nut (39976)
£75.03
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 37612 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 6.652 kg |
| Paired article numbers | 182551 |
| Placement on Vehicle | Front Axle Right |
| Cone Size 1 | 21 mm |
| Cone Size | 26 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Bolt Hole Circle Diameter | 170 mm |
| Weight | 15.4 kg |
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 84 mm |
| Brake Disc Thickness | 22 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 19 mm |
| Centering Diameter | 125 mm |
| Surface | Coated |
| Function | Brake Disc |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Number of Connectors / Ports | 4. 5 |
| Weight | 0.122 kg |
| Type | Control Unit, glow time |
| Extra Description | febi Plus |
| Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 2.35 kg |
| Max. Length | 260 mm |
| Min. Length | 218 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 40 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.021 kg |
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45377)
- 1x Febi Nut, stabiliser bar (22264)
£75.03
Important compatibility info
| Number of Connectors / Ports | 9 |
| Extra Description | febi Plus |
| Weight | 0.056 kg |
| for OE number | 55271957 |
| Type | Control Unit, glow time |
| Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 1.0 kg |
| Paired article numbers | 176901 |
| Additional Information | with fastening/mounting material, without electric motor |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.050 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.00
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| Weight | 9.354 kg |
| External Teeth, Diff.Side | 36 |
| Min. Length | 797 mm |
| ABS Ring Diameter | 105 mm |
| Wheel Sided Joint Diameter | 100 mm |
| Transmission-side joint diameter | 92.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 36.6 mm |
| Weight | 5.930 kg |
| Outer diameter | 87.5 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 78 mm |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter 1 | 65 mm |
| Outer diameter 2 | 210 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Weight | 0.597 kg |
| Material | Aluminium |
| Inner diameter | 23.81 mm |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Weight | 0.826 kg |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Replaces | 38195 |
| Additional Information | with slide rails, with chain tensioner |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Tensioner, timing chain (47638)
£74.99
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 0.600 kg |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
| for OE number | 22 11 6 856 405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 0.84 kg |
| Type | Mounting, engine |
| for OE number | 22 11 6 862 549 |
| External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.99
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| External Thread Size | M10 x 1,5 |
| Weight | 0.620 kg |
| for OE number | 22 11 6 856 406 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.96
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Weight | 0.196 kg |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.95
Important compatibility info
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.18 kg |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.95
Important compatibility info
| Weight | 1.125 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.93
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 43 mm |
| Outer diameter | 266 mm |
| Thickness | 73 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 85 mm |
| Number of mounting bores | 1 |
| Max.skimmed drum measure | 231 mm |
| Inner Brake Drum Diameter | 230 mm |
| Function | Brake Drum |
| Rim Hole Number | 5 -Hole |
| Weight | 6.5 kg |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.91
Important compatibility info
| Outer diameter | 52 mm |
| Additional Information 2 | with cable |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Weight | 0.8 kg |
| Pipe Diameter | 8 mm |
| Type | Fuel Pump |
| Function | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.91
Important compatibility info
| Weight | 0.935 kg |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Outer diameter | 124 mm |
| Thickness | 23 mm |
| Number of Holes | 6 |
| Mounting points diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.89
Important compatibility info
| Weight | 0.613 kg |
| Parameter | VL100R-M40 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.88
Important compatibility info
| Placement on Vehicle | Upper |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 74 |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Function | Timing Chain Kit |
| Weight | 0.758 kg |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (21267)
- 1x Febi Guide, timing chain (24829)
- 1x Febi Guide, timing chain (24830)
- 1x Febi Tensioner, timing chain (21291)
£74.87
Important compatibility info
| Weight | 1.312 kg |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03601)
- 6x Febi Screw (03931)
- 1x Febi Assembly Kit, propshaft joint (22117)
£74.86
Important compatibility info
| Number of Connectors / Ports | 5 |
| Weight | 0.2 kg |
| for OE number | 059 906 461 N |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.85
Important compatibility info
| Weight | 0.521 kg |
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.84
Important compatibility info
| Internal Teeth, wheel side | 25 |
| Weight | 2.090 kg |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 37 |
| Function | Joint Kit, drive shaft |
| Thread Size | M16 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.83
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.600 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 394 mm |
| Max. Length | 394 mm |
| Min. Length | 274 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.82
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.990 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 584 mm |
| Max. Length | 584 mm |
| Min. Length | 357 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.82
Important compatibility info
| Weight | 1.027 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.81
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.070 kg |
| for OE number | 2192 598 |
| Cable Length | 700 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.80
Important compatibility info
| Weight | 0.18 kg |
| Function | Steering Column Switch |
| Combi Switch Function | with light dimmer function, with high beam function, with fog-lamp function, with rear fog light function, with indicator function |
| Number of Connectors / Ports | 10 |
| Type | Steering Column Switch |
Additional Information
Technical Information
This article replaces the former version for vehicles without fog light function and is thereby suitable for both vehicles with and without fog lights.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.80
Important compatibility info
| Weight | 8.660 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 299 mm |
| Thickness | 48.5 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Weight | 7.81 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 65 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 8.530 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 63.6 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Max.skimmed drum measure | 207.2 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| Weight | 4.944 kg |
| External Teeth, Diff.Side | 33 |
| Min. Length | 592 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183386 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Placement on Vehicle | engine sided |
| Weight | 4.415 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.76
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Weight | 8.830 kg |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Paired article numbers | 178984 |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.71
Important compatibility info
| Weight | 3.190 kg |
| Outer diameter | 317 mm |
| Inner diameter | 196 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Height | 401 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.70
Important compatibility info
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 188267 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Placement on Vehicle | Rear Axle Left |
| Weight | 2.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.63
Important compatibility info
| Height | 139 mm |
| Length | 222 mm |
| Width | 155 mm |
| Weight | 2.372 kg |
| Placement on Vehicle | Lower Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023