Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Upper |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 74 |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Function | Timing Chain Kit |
| Weight | 0.758 kg |
| Type | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (21267)
- 1x Febi Guide, timing chain (24829)
- 1x Febi Guide, timing chain (24830)
- 1x Febi Tensioner, timing chain (21291)
£74.87
Important compatibility info
| Weight | 1.312 kg |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (03601)
- 6x Febi Screw (03931)
- 1x Febi Assembly Kit, propshaft joint (22117)
£74.86
Important compatibility info
| Number of Connectors / Ports | 5 |
| Weight | 0.2 kg |
| for OE number | 059 906 461 N |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.85
Important compatibility info
| Weight | 0.521 kg |
| Type | Cylinder Liner, air compressor |
| Function | Cylinder Liner, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.84
Important compatibility info
| Internal Teeth, wheel side | 25 |
| Weight | 2.090 kg |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 37 |
| Function | Joint Kit, drive shaft |
| Thread Size | M16 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.83
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.600 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 394 mm |
| Max. Length | 394 mm |
| Min. Length | 274 mm |
| Pipe Diameter | 48 mm. 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.82
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.990 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 584 mm |
| Max. Length | 584 mm |
| Min. Length | 357 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.82
Important compatibility info
| Weight | 1.027 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.81
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.070 kg |
| for OE number | 2192 598 |
| Cable Length | 700 mm |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.80
Important compatibility info
| Weight | 0.18 kg |
| Function | Steering Column Switch |
| Combi Switch Function | with light dimmer function, with high beam function, with fog-lamp function, with rear fog light function, with indicator function |
| Number of Connectors / Ports | 10 |
| Type | Steering Column Switch |
Additional Information
Technical Information
This article replaces the former version for vehicles without fog light function and is thereby suitable for both vehicles with and without fog lights.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.80
Important compatibility info
| Weight | 7.81 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 65 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| Weight | 4.944 kg |
| External Teeth, Diff.Side | 33 |
| Min. Length | 592 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Paired article numbers | 183386 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 8.530 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 63.6 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Max.skimmed drum measure | 207.2 mm |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Weight | 8.660 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 299 mm |
| Thickness | 48.5 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.78
Important compatibility info
| Placement on Vehicle | engine sided |
| Weight | 4.415 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.76
Important compatibility info
| Inner diameter | 35 mm |
| Weight | 0.35 kg |
| Bearing Type | Rolling Bearing |
| Additional Information 2 | with rolling bearing |
| Thickness | 165 mm |
| Outer diameter | 55 mm |
| Width | 36 mm |
| Hole Spacing | 145 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.75
Important compatibility info
| Weight | 3.190 kg |
| Outer diameter | 317 mm |
| Inner diameter | 196 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Height | 401 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.70
Important compatibility info
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Paired article numbers | 188267 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Placement on Vehicle | Rear Axle Left |
| Weight | 2.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.63
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.410 kg |
| for OE number | 11 37 520 39R |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.62
Important compatibility info
| Height | 139 mm |
| Length | 222 mm |
| Width | 155 mm |
| Weight | 2.372 kg |
| Placement on Vehicle | Lower Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£74.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023