Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Paired article numbers | 182583 |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 6 860 488 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Belts | with rounded tooth profile |
| Width | 20 mm |
| Number of Teeth | 146 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14113)
- 1x Febi Water Pump, engine cooling (04731)
Important compatibility info
| Length | 226.5 mm |
| Outer diameter | 147 mm |
| Voltage | 12 V |
| Colour | White |
| Number of Connectors / Ports | 2 |
| Rated Power | 210 W |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Paired article numbers | 106071 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Right Front |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 70 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Width | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Front Axle |
| Length | 450 mm |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, outer |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 185608 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 312 mm |
| Core Width | 670 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a, R 1234yf |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 668 mm |
| Core Width | 351 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Type | Gasket Set, wheel hub |
| Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (03429)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 642 200 13 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 74 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 93.9 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Min. Length | 759 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Core Depth | 16 mm |
| Core Length | 391 mm |
| Function | Condenser, air conditioning |
| Type | Condenser, air conditioning |
| Core Width | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 335 mm |
| Thickness | 118 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 176 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M14 x 1,5, M8 x 1,25 |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 148 mm |
| Width | 85 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6 PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| for OE number | 020 911 023 FX |
| Rated Power | 1.1 kW |
| Number of Teeth | 9 |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Divert-air Valve, charger |
| Extra Description | febi Plus |
| Type | Divert-air Valve, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 177970 |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 36 |
| Min. Length | 515 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 123 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Manufacturer | Mekra Lang |
| Placement on Vehicle | Right |
| Length | 200 mm |
| Width | 197 mm |
| Thickness | 75 mm |
| Voltage | 24 V |
| Outer/Inner Mirror | Heatable |
| Type | Mirror Glass, wide angle mirror |
| Camber Radius | 300 mm |
| Function | Mirror Glass, wide angle mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Additional Information | with gasket/seal, with venting hoses |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (170406)
- 1x Febi Hose, crankcase ventilation (170674)
- 1x Febi Hose, crankcase ventilation (170861)
Important compatibility info
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Additional Information | with gasket/seal, with venting hoses |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hose, crankcase ventilation (171008)
- 1x Febi Hose, crankcase ventilation (170596)
- 1x Febi Oil Separator, crankcase ventilation (170406)
Important compatibility info
| Hole Spacing | 188 mm |
| Length | 212 mm |
| Inner diameter | 50 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (171929)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 175623 |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 711 mm |
| Housing Diameter | 22 mm |
| Eject Force | 1270 N |
| Stroke | 196 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 10 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 475.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 30.1 mm |
| Inspection Tag | ECE R90 Approved |
| Width | 90.7 mm |
| Length | 210.2 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | slotted/perforated, internally vented |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Thickness | 67.2 mm |
| Brake Disc Thickness | 22 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Spanner Size | 17 |
| Cable Length | 270 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ball joint, with bearing |
| Placement on Vehicle | Front Axle Left, Front |
| Material | Steel |
| External Thread Size | M14 x 1,5 |
| Steering arm type | Control Arm |
| Paired article numbers | 174786 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 8 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 73.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 110 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Additional Information 2 | with cable |
| Connector Shape | round |
| Number of Connectors / Ports | 1 |
| Type | Knock Sensor |
| Function | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Outer diameter | 149 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 42 mm |
| Min. Length | 166 mm |
| Max. Length | 303 mm |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Type | Drum Brake |
| Parameter | Typ 24 / 30 |
| Stroke | 76 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 270 mm |
| Piston Rod Thread | M16 x 1,5 |
| Function | Spring-loaded Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Type | Spring-loaded Cylinder |
| Replaces | 21898 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 38.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72.6 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 34 mm |
| Outer diameter | 107 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Metal |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Opening Temperature | 97 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 50 mm |
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Iron |
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182949 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 43 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182948 |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fitting, intake manifold |
| Type | Fitting, intake manifold |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, without adjusting element |
| Placement on Vehicle | Left |
| Paired article numbers | 176463 |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 07965 |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
| Paired article numbers | 182078 |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023
















































