Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 213 240 05 00 |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 50 mm |
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Cast Iron |
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 182949 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 43 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182948 |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Paired article numbers | 182252 |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Type | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Function | Brake Caliper |
| Paired article numbers | 182251 |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 51 mm |
| Outer diameter | 300 mm |
| Brake Disc Thickness | 20 mm |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Minimum thickness | 18.4 mm |
| Machining | High-carbon |
| Number of mounting bores | 1 |
| Placement on Vehicle | Rear Axle |
| Bolt Hole Circle Diameter | 112 mm |
| Rotor Style | internally vented, slotted/perforated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 102 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tensioner, timing chain |
| Length | 91 mm |
| Function | Tensioner, timing chain |
| Outer diameter | 27 mm |
| Operating Mode | Hydraulic |
| Spanner Size | 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with crankshaft seal |
| Material | FKM (fluorocarbon rubber), Sheet Steel |
| Additional Information 2 | with lid |
| for OE number | 2 192 482 SK1 |
| Type | Cover, timing belt |
| Function | Cover, timing belt |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 321 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Belts | with trapezoidal tooth profile |
| Surface | Coated |
| Width | 24 mm |
| Number of Teeth | 199 |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (28306)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (23654)
- 1x Febi Tensioner Pulley, timing belt (10298)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (177914)
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 8 835 572 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 44 mm |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| for OE number | 98 109 168 80 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 47 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 15 mm |
| Mounting points diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 780 mm |
| Inner length 1 | 705 mm |
| Outer length 1 | 985 mm |
| Outer length 2 | 978 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Paired article numbers | 180466 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 97 mm |
| Width | 62 mm |
| Thickness | 49 mm |
| Voltage | 12 V |
| Number of Connectors / Ports | 8 |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Glow Plug |
| External Thread Size | M9 x 1 |
| Type | Glow Plug |
| Glow Plug Type | Metal glow plug |
| Fitting Depth | 34.5 mm |
| Spanner Size | 9 |
| Voltage | 11 V |
| Length | 156 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39972 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32326)
- 1x Febi Nut (31484)
- 1x Febi Ball Joint (30509)
- 1x Febi Screw (39865)
- 1x Febi Screw (39229)
- 2x Febi Screw (37613)
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39973 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32326)
- 1x Febi Ball Joint (30510)
- 1x Febi Nut (31484)
- 1x Febi Screw (39865)
- 1x Febi Screw (39229)
- 2x Febi Screw (37613)
Important compatibility info
| Material | Steel |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Length | 669 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Outer diameter | 385 mm |
| Surface | Coated |
| Function | Brake Disc |
| Thickness | 78 mm |
| Brake Disc Thickness | 24 mm |
| Centering Diameter | 75 mm |
| Machining | High-carbon |
| Bolt Hole Circle Diameter | 120 mm |
| Minimum thickness | 22.4 mm |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper, Front |
| Material | Aluminium |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 417 mm |
| Thickness | 67 mm |
| Brake Disc Thickness | 28 mm |
| Brake Disc Type | Internally Vented |
| Function | Brake Disc |
| Number of Holes | 10 |
| Minimum thickness | 25.5 mm |
| Bolt Hole Circle Diameter | 186 mm |
| Surface | Coated |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 139 mm |
| Bearing Type | Double Row |
| Inner diameter | 60 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Width | 80 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (103892)
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























