Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.020 kg |
| Number of Connectors / Ports | 10 |
| Function | Steering Angle Sensor |
| Voltage | 12 V |
| Type | Steering Angle Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.36
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.647 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 1.700 kg |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.35
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20 x 1,5 |
| External Teeth, Wheel Side | 33 |
| Weight | 0.001 kg |
| External Teeth, Diff.Side | 34 |
| Min. Length | 618 mm |
| ABS Ring Diameter | 78 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.28
Important compatibility info
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.864 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Paired article numbers | 174743 |
| Additional Information | with rubber mounts, with crown nut and split pin |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.26
Important compatibility info
| Paired article numbers | 182067 |
| Weight | 2.065 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.26
Important compatibility info
| Weight | 0.4 kg |
| Number of Connectors / Ports | 2 |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
| Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.25
Important compatibility info
| Function | Brake Master Cylinder |
| Weight | 0.595 kg |
| Material | Aluminium |
| Piston Diameter | 25.4 mm |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.24
Important compatibility info
| Weight | 1.07 kg |
| Additional Information 2 | with screw |
| Width of castor bearing surface | 30 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 11 28 7 582 946 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.24
Important compatibility info
| Weight | 3.811 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 18802 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with holder, with hydro mount |
| Additional Information 2 | with ball joint |
| Additionally Required Parts | 7 12 9 906 196, 31 10 6 757 145, 31 10 6 772 199 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12529)
- 1x Febi Mounting, control/trailing arm (18688)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£71.24
Important compatibility info
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 17318 |
| Weight | 4.800 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with lock nut, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Weight | 0.817 kg |
| Number of Connectors / Ports | 6 |
| Type | Ignition Coil |
| Function | Ignition Coil |
| for OE number | 55200112 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.21
Important compatibility info
| Thickness | 45 mm |
| Rim Hole Number | 5 -Hole |
| Brake Disc Thickness | 26 mm |
| Function | Brake Disc |
| Rotor Style | Vented |
| Minimum thickness | 23.8 mm |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Centering Diameter | 61 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Number of mounting bores | 2 |
| Weight | 8.0 kg |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.20
Important compatibility info
| Additional Information | with fastening/mounting material |
| Core Width | 134 mm |
| Core Depth | 22 mm |
| Weight | 0.418 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Weight | 0.584 kg |
| Driver Position | for right-hand drive vehicles |
| Inner Length | 922 mm |
| Outer Length | 1092 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Material | Aluminium |
| Weight | 1.350 kg |
| Type | Oil Cooler, automatic transmission |
| Function | Oil Cooler, automatic transmission |
| Core Length | 142 mm |
| Core Width | 80 mm |
| Core Depth | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Function | Solenoid Valve |
| Weight | 0.429 kg |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.19
Important compatibility info
| Outer diameter 2 | 151 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Bolt Hole Circle Diameter | 115 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter | 91 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter 1 | 70.5 mm |
| Inner diameter | 34 mm |
| Replaces | 172488 |
| Bearing Type | Angular Ball Bearing |
| Weight | 4.311 kg |
| Width | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.18
Important compatibility info
| Minimum thickness | 17 mm |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 20 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Brake Disc |
| Number of mounting bores | 2 |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Outer diameter | 354 mm |
| Thickness | 74.8 mm |
| Weight | 9.28 kg |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.17
Important compatibility info
| Height | 569 mm |
| Outer diameter | 363 mm |
| Inner diameter | 228 mm |
| Filter type | Filter Insert |
| Weight | 4.5 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.16
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 45592 |
| Weight | 1.051 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.16
Important compatibility info
| Function | Brake Caliper |
| Weight | 2.109 kg |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181191 |
| Brake caliper piston diameter | 54 mm |
| Placement on Vehicle | Front Axle Right |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.15
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 54 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 9.060 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.14
Important compatibility info
| Weight | 5.314 kg |
| Width | 22 mm |
| Outer diameter | 508 mm |
| Inner diameter | 460 mm |
| Number of Teeth | 167 |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.13
Important compatibility info
| Weight | 0.821 kg |
| Paired article numbers | 177099 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.13
Important compatibility info
| Additional Information 2 | with nut, with bolts/screws |
| Thread Size | M20x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 36 |
| Weight | 8.276 kg |
| Number of mounting bores | 6 |
| Min. Length | 804 mm |
| Wheel Sided Joint Diameter | 97 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.12
Important compatibility info
| Weight | 2.7 kg |
| Brake caliper piston diameter | 41 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Paired article numbers | 181543 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.09
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 41 mm |
| Weight | 2.7 kg |
| Type | Brake Caliper |
| Paired article numbers | 181542 |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.09
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 235 mm |
| Weight | 0.058 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before soot particulate filter |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| Weight | 9.32 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 43.9 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.08
Important compatibility info
| Weight | 0.8 kg |
| Outer diameter | 124 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 80 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 0.442 kg |
| Material | Plastic |
| Opening Temperature | 97 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Weight | 2.4 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 418 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Cone Size | 32 mm |
| Material | Steel |
| Diameter | 230 mm |
| Length | 343 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 4.400 kg |
| Diameter 1 | 38 mm |
| Rod/Strut | Coupling Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 185204 |
| Weight | 1.586 kg |
| Cone Size | 21 mm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 0.924 kg |
| Height | 102 mm |
| Additional Information | with holder |
| Filter type | with filter heating, with housing cover |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
| Length | 120 mm |
| Width | 135 mm |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Additional Information | with lock nut |
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Rear, Lower, Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 179414 |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.950 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
| Weight | 2.582 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Additional Information | with nuts |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Diameter | 230 mm |
| Length | 283 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| External Thread Size | M24 x 1,5 |
| Weight | 4.200 kg |
| Cone Size | 32 mm |
| Pipe Diameter | 38 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.500 kg |
| Width of castor bearing surface | 46 mm |
| for OE number | 5 0404 6191 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Weight | 1.3 kg |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 19993 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 3.150 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | without holder |
| Additional Information 2 | without ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Weight | 2.34 kg |
| Cone Size | 25 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 1.13 kg |
| Length | 370 mm |
| Height | 188 mm |
| Width | 42 mm |
| Number of Connectors / Ports | 2 |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 188 mm |
| Core Width | 370 mm |
| Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 0.1885 kg |
| Cable Length | 460 mm |
| Number of Connectors / Ports | 2 |
| Voltage | 24 V |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43138 |
| Weight | 2.1 kg |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| External Thread Size | M27 x 1,5 |
| Weight | 7.54 kg |
| Cone Size | 30 mm. 32 mm |
| Function | Centre Rod Assembly |
| Length | 840 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 2.996 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 173585 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17.4 mm |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
Important compatibility info
| Weight | 0.5283 kg |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| Colour | Black |
| Material | Plastic |
| Additional Information | with venting hoses |
| for OE number | 06H 103 495 AJ S2 |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (176317)
- 1x Febi Hose, crankcase ventilation (109552)
- 1x Febi Hose, crankcase ventilation (170674)
£71.07
Important compatibility info
| Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
| Weight | 5.5 kg |
| Function | Tie Rod |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Type | Tie Rod |
| Pipe Diameter | 30 mm |
| Additional Information 2 | with crown nut |
| Length | 1645 mm |
| External Thread Size | M16 x 1,5 |
| Cone Size | 20 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023