Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
Function | Bush Set, axle beam |
Material | Rubber |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Weight | 1.890 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22445)
- 2x Febi Screw (22488)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M20 x 1,5 |
External Teeth, Wheel Side | 33 |
Weight | 0.001 kg |
External Teeth, Diff.Side | 34 |
Min. Length | 618 mm |
ABS Ring Diameter | 78 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 82 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 18 mm |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.864 kg |
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 174744 |
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 182067 |
Weight | 2.065 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Upper |
Additional Information 2 | with bearing |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.16 kg |
Function | Water Pump & Timing Belt Kit |
Number of Teeth | 135 |
Belts | with rounded tooth profile |
Width | 19 mm |
Type | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14608)
- 1x Febi Water Pump, engine cooling (09754)
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Additional Information | with lock nut, with rubber mounts |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 195980 |
Weight | 0.946 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 17318 |
Weight | 4.800 kg |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts, with lock nut |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.817 kg |
Number of Connectors / Ports | 6 |
Type | Ignition Coil |
Function | Ignition Coil |
for OE number | 55200112 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Core Width | 134 mm |
Core Depth | 22 mm |
Weight | 0.418 kg |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Length | 255 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Number of Connectors / Ports | 2 |
Function | Solenoid Valve |
Weight | 0.429 kg |
Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.584 kg |
Driver Position | for right-hand drive vehicles |
Inner Length | 922 mm |
Outer Length | 1092 mm |
Type | Cable Pull, clutch control |
Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 9.36 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 314 mm |
Thickness | 49.6 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 27 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 178 mm |
Additional Information 2 | with anti-squeak plate, with fastening material |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 20.8 mm |
Weight | 3.056 kg |
Width | 67.6 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | with acoustic wear warning |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 569 mm |
Outer diameter | 363 mm |
Inner diameter | 228 mm |
Filter type | Filter Insert |
Weight | 4.5 kg |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Caliper |
Weight | 2.109 kg |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181191 |
Brake caliper piston diameter | 54 mm |
Placement on Vehicle | Front Axle Right |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.314 kg |
Width | 22 mm |
Outer diameter | 508 mm |
Inner diameter | 460 mm |
Number of Teeth | 167 |
Function | Ring Gear, flywheel |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.7 kg |
Brake caliper piston diameter | 41 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Paired article numbers | 181543 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 302 mm |
Thickness | 54 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 139.7 mm |
Centering Diameter | 96 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Weight | 8.640 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.700 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 07966 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
Important compatibility info
Paired article numbers | 07965 |
Placement on Vehicle | Lower Front Axle, Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.700 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
Important compatibility info
Weight | 0.419 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 154 |
Timing Chain Size | G53HR |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.635 kg |
Cone Size | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 174785 |
Steering arm type | Control Arm |
Additional Information 2 | with bearing, with ball joint |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Right, Front |
Material | Steel |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.570 kg |
Placement on Vehicle | Front Axle |
Length | 1005 mm |
Outer diameter | 42 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm. 30 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5, M24 x 1,5 |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 48 mm |
Placement on Vehicle | Rear Axle Right |
Weight | 4.1 kg |
Inner diameter | 120 mm |
Outer diameter | 180 mm |
Function | Bearing / Wheel Bearing |
Type | Bearing / Wheel Bearing |
Bearing Type | Tapered Roller Bearing |
Bearing Code | 33024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
Weight | 5.5 kg |
Function | Tie Rod |
Extra Description | ProKit |
Placement on Vehicle | Front Axle |
Type | Tie Rod |
Pipe Diameter | 30 mm |
Additional Information 2 | with crown nut |
Length | 1645 mm |
External Thread Size | M16 x 1,5 |
Cone Size | 20 mm |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Material | Rubber/Metal |
Outer diameter | 167 mm |
Number of Holes | 3 |
Additional Information 2 | with bolts/screws |
Weight | 2.690 kg |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (30097)
Important compatibility info
Weight | 4.900 kg |
Additional Information | with lock nut, with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 23181 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Rod/Strut | Coupling Rod |
Material | Steel |
Diameter | 230 mm |
Length | 283 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
External Thread Size | M24 x 1,5 |
Weight | 4.200 kg |
Cone Size | 32 mm |
Pipe Diameter | 38 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mass Air Flow Sensor |
Weight | 0.04 kg |
Number of Connectors / Ports | 4 |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 22773 |
Combi Switch Function | with klaxon, with indicator function, with light dimmer function, with rear fog light function, with high beam function |
Function | Steering Column Switch |
Weight | 0.100 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Additional Information 2 | with bolts/screws |
Thread Size | M16x1,5 |
Additional Information | with grease |
Type | Drive Shaft |
Min. Length | 526 mm |
Bore Diameter | 10.6 mm |
Number of mounting bores | 6 |
Bolt Hole Circle Diameter | 94 mm |
External Teeth, Wheel Side | 38 |
Weight | 7.098 kg |
ABS Ring Diameter | 104 mm |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 108 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cylinder Head, air compressor |
Type | Cylinder Head, air compressor |
Weight | 1.3 kg |
Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Width | 50 mm |
Inner diameter | 49 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | with ABS sensor ring |
Weight | 1.824 kg |
Outer diameter | 92 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bearing, with ball joint |
Placement on Vehicle | Front Axle Left, Front |
Material | Steel |
External Thread Size | M14 x 1,5 |
Weight | 4.635 kg |
Steering arm type | Control Arm |
Paired article numbers | 174786 |
Cone Size | 24 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.924 kg |
Height | 102 mm |
Additional Information | with holder |
Filter type | with filter heating, with housing cover |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Length | 120 mm |
Width | 135 mm |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Length | 509 mm |
Steering arm type | Trailing Arm |
Rod/Strut | Guide Rod |
Pipe Diameter | 41 mm |
Weight | 10.35 kg |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.8 kg |
Rated Power | 1.1 kW |
Function | Starter |
Type | Starter |
Voltage | 12 V |
Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 30429 |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 3.88 kg |
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 19993 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 3.150 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | without holder |
Additional Information 2 | with rubber mount, without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.44 kg |
Outer diameter | 78 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 42 mm |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 457 200 31 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clutch Release Bearing |
Weight | 2.836 kg |
for OE number | 81.30550.0116 |
Type | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.8 kg |
Outer diameter | 124 mm |
Inner diameter | 33 mm |
Bolt Hole Circle Diameter | 80 mm |
Thickness | 24 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.88 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30430 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Additional Information 2 | with lid |
Weight | 2.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.306 kg |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Width | 36 mm |
Outer diameter | 163 mm |
Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Weight | 3.38 kg |
Cone Size | 19 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Weight | 6.7 kg |
Placement on Vehicle | Front Axle |
Length | 728 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 40 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1420 mm |
Additional Information 2 | with tensioner element |
Number of Ribs | 8 |
Weight | 1.595 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29124)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
Important compatibility info
Weight | 0.442 kg |
Material | Plastic |
Opening Temperature | 97 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.5 kg |
Additional Information | with rubber mounts, with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36954)
- 1x Febi Nut (15902)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023