Important compatibility info
Length | 1150 mm |
Outer diameter | 33 mm |
Inner diameter | 20 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 33 mm |
Function | Centre Rod Assembly |
Weight | 5.58 kg |
External Thread Size | M24 x 1,5 |
Additional Information | with castellated nut and split pins |
Placement on Vehicle | from 1st idler arm to the 2nd idler arm |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Chain Type | Simplex, Closed chain |
Weight | 0.814 kg |
Type | Timing Chain Kit |
Number of Chain Links | 134 |
for OE number | 13506-37050 S1 |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (179670)
- 1x Febi Tensioner, timing chain (109308)
- 1x Febi Guide, timing chain (109450)
- 1x Febi Guide, timing chain (174609)
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 185204 |
Weight | 1.586 kg |
Cone Size | 21 mm |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Upper |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.271 kg |
Voltage | 24 V |
Combi Switch Function | with indicator function, with high beam function, with hazard warning light function |
for OE number | 70351705 |
Type | Direction Indicator Switch / Hazard Warning Light Switch / Steering Column Switch / Switch, headlight |
Function | Direction Indicator Switch / Hazard Warning Light Switch / Steering Column Switch / Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 380 N |
Function | Gas Spring, boot/cargo area |
Mounting points diameter | 17.8 mm |
Stroke | 172 mm |
Weight | 0.3 kg |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Housing length | 254.5 mm |
Placement on Vehicle | both sides |
Length | 454 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 2.996 kg |
Placement on Vehicle | Front Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 173585 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 17.4 mm |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Operating Mode | Manual |
Paired article numbers | 183287 |
Weight | 3.0 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 1.385 kg |
for OE number | 17 13 9 846 642 |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5283 kg |
Extra Description | febi Plus |
Function | Oil Separator, crankcase ventilation |
Type | Oil Separator, crankcase ventilation |
Colour | Black |
Material | Plastic |
Additional Information | with venting hoses |
for OE number | 06H 103 495 AJ S2 |
Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (176317)
- 1x Febi Hose, crankcase ventilation (109552)
- 1x Febi Hose, crankcase ventilation (170674)
Important compatibility info
Additional Information | with rubber mounts |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Weight | 0.733 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.075 kg |
Placement on Vehicle | Front Axle |
Length | 738 mm |
Outer diameter | 40 mm |
Thickness | 103 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Function | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Weight | 1.13 kg |
Length | 370 mm |
Height | 188 mm |
Width | 42 mm |
Number of Connectors / Ports | 2 |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Length | 188 mm |
Core Width | 370 mm |
Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 86 mm |
Width | 62 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Weight | 3.740 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Type | Shock Absorber, driver cab suspension |
Weight | 1.5 kg |
Operating Mode | Pneumatic |
Placement on Vehicle | Rear |
Function | Shock Absorber, driver cab suspension |
Piston Diameter | 16 mm |
Pipe Diameter | 44 mm |
Mounting points diameter | 14 mm |
External Thread Size | M12 x 1,75 |
Max. Length | 344 mm |
Min. Length | 254 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.45 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 41808 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Replaces | 41728; 41850 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Cone Size | 32 mm |
Material | Steel |
Diameter | 230 mm |
Length | 343 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 4.400 kg |
Diameter 1 | 38 mm |
Rod/Strut | Coupling Rod |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41809 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.45 kg |
Additional Information 2 | with ball joint |
Replaces | 41727 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 35 mm |
Outer diameter | 55 mm |
Thickness | 106 mm |
Inner diameter | 30 mm |
Function | Suspension, propshaft |
Weight | 0.47 kg |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Bearing Type | Rolling Bearing |
Hole Spacing | 190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Steel |
Weight | 6.67 kg |
Paired article numbers | 48156 |
Placement on Vehicle | Front Axle Right, Lower |
Cone Size | 22 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.75 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 276 mm |
Min. Length | 237 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023