Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 890 mm |
| Inner length 2 | 903 mm |
| Outer length 1 | 1154 mm |
| Outer length 2 | 1251 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wheel Sided Joint Diameter | 91 mm |
| External Teeth, Diff.Side | 24 |
| Min. Length | 951 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 28 |
| Paired article numbers | 182966 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| External Thread Size | M8 x 1,25, M16 x 1 |
| Type | Wiper Linkage |
| Function | Wiper Linkage |
| Placement on Vehicle | Rear |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 590 mm |
| Diameter | 120 mm |
| Placement on Vehicle | 2nd rear axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 187797 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Cone Size | 20 mm |
| Cone Size 1 | 15.7 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Paired article numbers | 187796 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 15.7 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
| Driver Position | for right-hand drive vehicles |
| Voltage | 12 V |
| Additional Information 2 | with cable |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Type | Wiper Motor |
| Function | Wiper Motor |
| Additional Information 2 | with nut, with bolts/screws |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Type | Gasket Set, wheel hub |
| Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (03429)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Function | Brake Disc |
| Surface | Coated |
| Thickness | 120.5 mm |
| Brake Disc Thickness | 30 mm |
| Centering Diameter | 104 mm |
| Outer diameter | 304 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 106.21 mm |
| Width | 59.31 mm |
| Thickness | 117.52 mm |
| Valve type | Solenoid Valve |
| Function | Valve, ABS regulation |
| Type | Valve, ABS regulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 288 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Length | 183 mm |
| Width | 121 mm |
| Thickness | 131 mm |
| Paired article numbers | 30628 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 27415 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Length | 183 mm |
| Width | 121 mm |
| Thickness | 131 mm |
| Paired article numbers | 30627 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 27416 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Bush Set, axle beam |
| Inner diameter | 33 mm |
| Thickness | 95 mm |
| Outer diameter | 79 mm |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Spring Washer (01074)
- 2x Febi Springwasher (01076)
- 8x Febi Screw (04859)
- 2x Febi Screw (04956)
- 2x Febi Sealing/Protective Cap (04976)
- 2x Febi Bushing, axle beam (04980)
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 158 |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Number of markings | 5 |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PA (polyamide) |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03G 906 088 BA |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 480 mm |
| Number of Teeth | 158 |
| Type | Ring Gear, flywheel |
| Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| for OE number | 20736230 |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023


















