Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Additional Information 2 | without ball joint |
| Material | Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.46
Important compatibility info
| Paired article numbers | 43133 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Function | Cable Pull, manual transmission |
| Inner length 2 | 857 mm |
| Outer length 1 | 1235 mm |
| Inner length 1 | 940 mm |
| Type | Cable Pull, manual transmission |
| Outer length 2 | 1132 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Capacity | 15 l |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 206 mm |
| Operating Pressure | 14.5 bar |
| Type | Air Tank, compressed-air system |
| Material | Steel |
| Length | 513 mm |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Upper |
| Paired article numbers | 43134 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| for OE number | 009 542 16 18 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 011 542 23 18 64 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.42
Important compatibility info
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| External Thread Size | M16 x 1,5 |
| Length | 421 mm |
| Wet Sump Material | Aluminium |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.42
Important compatibility info
| Function | Ignition Coil |
| Ignition Coil | 3 Spark |
| Number of Connectors / Ports | 5 |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.41
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 1000247 |
| Number of Connectors / Ports | 8 |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.38
Important compatibility info
| Length | 1130 mm |
| Number of Ribs | 7 |
| Tensile Cord Material | Polyester |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
£70.36
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1020 mm |
| Inner length 2 | 942 mm |
| Outer length 1 | 1227 mm |
| Outer length 2 | 1217 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.35
Important compatibility info
| Material | PA (polyamide) |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.34
Important compatibility info
| Spanner Size | 22 |
| Cable Length | 600 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.34
Important compatibility info
| Voltage | 24 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Valve type | Solenoid Valve |
| Pressure | 10 bar |
| Function | Pressure Converter, exhaust control |
| Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.33
Important compatibility info
| Port / Connector type | - |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 200 mm. 155 mm |
| Thickness | 295 mm. 155 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5 |
| for OE number | 942 320 01 21 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.33
Important compatibility info
| Number of Teeth | 135 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23644)
- 1x Febi Water Pump, engine cooling (18124)
£70.32
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Paired article numbers | 104988 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.31
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
| Function | Bush Set, axle beam |
| Material | Rubber/Metal |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (29349)
- 2x Febi Bolt, axle beam mounting (29744)
£70.30
Important compatibility info
| Additional Information 2 | with screw |
| Width of castor bearing surface | 30 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 11 28 7 582 946 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.30
Important compatibility info
| Length | 222.5 mm |
| Additional Information | with Thrust Bearing |
| Additional Information 2 | with bearing |
| Type | Repair Kit, kingpin |
| Outer diameter | 50 mm |
| Paired article numbers | 15901 |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (15890)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
£70.29
Important compatibility info
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Camber correction | -0.5 ° |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.28
Important compatibility info
| Thread Size | M20x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 650 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 74.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.28
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 5WA 199 262 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.25
Important compatibility info
| Rotor Style | perforated/vented |
| Minimum thickness | 26 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 76 mm |
| Brake Disc Thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Function | Starter |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Rated Power | 0.9 kW |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 51.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62.1 mm |
| Surface | Coated |
| Number of mounting bores | 12 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 975 mm |
| Inner length 2 | 1000 mm |
| Outer length 1 | 1265 mm |
| Outer length 2 | 1323 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.23
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023