Important compatibility info
| Length | 460 mm |
| Outer diameter | 238 mm. 131 mm |
| Material | CR (chloroprene rubber) |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with indicator function, with rear fog light function, with high beam function, with fog-lamp function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Outer diameter | 65 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 34 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 906 200 20 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 96 |
| Type | Timing Chain Kit |
| for OE number | 06K 109 158 BS S4 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (101796)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49535)
Important compatibility info
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Rear Axle |
| Length | 207 mm |
| Width | 113.9 mm |
| Brake System | Knorr |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29.3 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Drum |
| Type | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Max.skimmed drum measure | 230.2 mm |
| Number of mounting bores | 2 |
| Centering Diameter | 63.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Inner diameter | 228.5 mm |
| Thickness | 63.7 mm |
| Outer diameter | 273 mm |
| Width | 49.5 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 16 mm |
| Paired article numbers | 185175 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rolling piston material | Plastic |
| Function | Bellow, air suspension |
| Thickness | 280 mm. 685 mm |
| Outer diameter | 260 mm. 200 mm |
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left |
| Steering arm type | Triangular Control Arm (CV) |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179405 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 8 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 325 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64.5 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 32046 |
| Placement on Vehicle | Left Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 15.5 mm |
| Housing length | 208.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 3 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 6 |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Min. Length | 541 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 38 |
| Bore Diameter | 10.6 mm |
| Additional Information | with grease |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal, Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 22 11 6 859 845 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.7 kW |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 300 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Operating Mode | Mechanical |
| Min. Length | 210 mm |
| Pipe Diameter | 92 mm. 45 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner length 2 | 890 mm |
| Inner length 1 | 908 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1218 mm |
| Outer length 2 | 1175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 328 mm |
| Min. Length | 252 mm |
| Pipe Diameter | 63 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 139 mm |
| Function | Oil Cooler, engine oil |
| Height | 134 mm |
| Length | 160 mm |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Paired article numbers | 170568 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 90 |
| Timing Chain Size | G67HP, G67HR |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Additional Information | with slide rails, with chain tensioner |
| for OE number | 24361-2F000 S1 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31073)
- 1x Febi Tensioner, timing chain (170581)
- 1x Febi Guide, timing chain (170578)
- 1x Febi Guide, timing chain (170583)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 20 |
| Min. Length | 650 mm |
| ABS Ring Diameter | 80 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Bolt Hole Circle Diameter | 115 mm |
| Centering Diameter | 70.7 mm |
| Function | Brake Disc |
| Surface | Coated |
| Brake Disc Thickness | 29 mm |
| Thickness | 51.5 mm |
| Outer diameter | 296 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Number of mounting bores | 1 |
| Minimum thickness | 27.4 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Master Cylinder, clutch |
| Fill Medium | Brake Fluid |
| Bore Diameter | 25 mm |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 742 mm |
| Inner length 1 | 742 mm |
| Outer length 1 | 1040 mm |
| Outer length 2 | 1096 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| External Teeth, Diff.Side | 26 |
| Min. Length | 663 mm |
| Wheel Sided Joint Diameter | 75 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Minimum thickness | 22 mm |
| Thickness | 48.8 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Centering Diameter | 79 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Rim Hole Number | 5 -Hole |
| Brake Disc Thickness | 25 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Internally Vented |
| Outer diameter | 350 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Surface | Coated |
| Centering Diameter | 65 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Thickness | 44 mm |
| Brake Disc Thickness | 25 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174504 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Timing Chain |
| Function | Timing Chain |
| Number of Chain Links | 100 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| for OE number | 253 240 10 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Wiper Motor |
| Number of Connectors / Ports | 3 |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rod/Strut | Coupling Rod |
| Diameter 2 | 15 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle |
| Length | 293 mm |
| Thickness | 36 mm |
| Diameter 1 | 15 mm |
| External Thread Size | M20 x 1,5 |
| Hole Spacing | 90 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39980 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information 2 | with bearing, with ball joint |
| Cone Size | 19 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39977)
- 1x Febi Nut (39976)
Important compatibility info
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 4 |
| Type | Wiper Motor |
| Function | Wiper Motor |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 300 mm. 190 mm |
| External Thread Size | M12 x 1,5, M16 x 2, M22 x 1,5 |
| Additional Information | without piston |
| Type | Bellow, air suspension |
| Thickness | 430 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40854 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (40821)
- 1x Febi Ball Joint (40845)
- 1x Febi Nut (34653)
- 1x Febi Bolt, control arm (40852)
Important compatibility info
| Additional Information 2 | with integrated oil separator |
| Material | Plastic |
| Outer diameter | 150 mm |
| Thickness | 170 mm |
| Type | Air Dryer Cartridge, compressed-air system |
| Function | Air Dryer Cartridge, compressed-air system |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 37141 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































