Proud to be a UK-based company
Contact us
Important compatibility info
| Core Length | 370 mm |
| Function | Heat Exchanger, interior heating |
| Type | Heat Exchanger, interior heating |
| Weight | 0.994 kg |
| Additional Information | with gasket/seal |
| Core Depth | 33 mm |
| Core Width | 179 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30195 |
| Weight | 2.230 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 22 mm |
| Cone Size | 19.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 18 mm |
| Function | Shock Absorber |
| Min. Length | 431 mm |
| Max. Length | 714 mm |
| Pipe Diameter | 63 mm. 76 mm |
| Mounting points diameter | 20 mm |
| Weight | 4.9 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Min. Length | 464 mm |
| Transmission-side joint diameter | 107.9 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| External Teeth, Wheel Side | 36 |
| Number of mounting bores | 6 |
| Weight | 6.014 kg |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Bore Diameter | 10.7 mm |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94.1 mm |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 130 |
| Timing Chain Size | D67HP, D67HR |
| Function | Timing Chain |
| Weight | 1.18 kg |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 9.370 kg |
| Brake Type | Drum Brake |
| Parameter | Typ 24 / 30 |
| Stroke | 76 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 270 mm |
| Piston Rod Thread | M16 x 1,5 |
| Function | Spring-loaded Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Type | Spring-loaded Cylinder |
| Replaces | 21898 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 2.200 kg |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 03935 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Weight | 1.680 kg |
| Length | 2043 mm |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29073)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£69.09
Important compatibility info
| Function | Window Regulator |
| Paired article numbers | 176520 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
| Weight | 1.26 kg |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 1.154 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 944 mm |
| Outer length 2 | 1233 mm |
| Inner length 2 | 965 mm |
| Outer length 1 | 1253 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Function | Housing, water pump |
| Weight | 2.17 kg |
| Type | Housing, water pump |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 1.11 kg |
| Type | Clutch, radiator fan |
| Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Upper |
| Weight | 1.55 kg |
| Paired article numbers | 43134 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Function | Brake Shoe Set |
| Brake Pad | without lining |
| Placement on Vehicle | Front Axle, Rear Axle |
| Width | 200 mm |
| Weight | 13.0 kg |
| Thickness | 8 mm |
| for OE number | 3095196 |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe (12220)
- 1x Febi Brake Shoe (12219)
£69.09
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Weight | 0.30 kg |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Material | Plastic |
| for OE number | 64 11 9 197 085 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 0.94 kg |
| Placement on Vehicle | Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Bolt Hole Circle Diameter | 175 mm |
| Surface | Coated |
| Function | Brake Disc |
| Minimum thickness | 28 mm |
| Number of Holes | 12 |
| Brake Disc Type | Internally Vented |
| Thickness | 119 mm |
| Brake Disc Thickness | 34 mm |
| Weight | 18.0 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Internal Thread Size | M12 x 1,75 |
| Type | Brake Disc |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Outer diameter | 78 mm |
| Weight | 1.587 kg |
| Width of castor bearing surface | 42 mm |
| Operating Mode | Automatic |
| Material | Aluminium |
| Replaces | 26914 |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 3.640 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 06792 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (08570)
- 1x Febi Ball Joint (08571)
£69.09
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Weight | 3.047 kg |
| Paired article numbers | 187796 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 15.7 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 32 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 1.783 kg |
| Outer diameter | 75 mm |
| Material | Metal |
| Width | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 1.926 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 385 mm |
| Core Width | 381 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Voltage | 24 V |
| Weight | 1.632 kg |
| Type | Wiper Motor |
| Function | Wiper Motor |
| Additional Information 2 | with nut, with bolts/screws |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 0.29 kg |
| Material | PA (polyamide) |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 590 mm |
| Diameter | 120 mm |
| Placement on Vehicle | 2nd rear axle |
| Type | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 88.9 mm |
| Type | Drive Shaft |
| Thread Size | M24 x 2,0 |
| Weight | 11.410 kg |
| External Teeth, Wheel Side | 28 |
| Min. Length | 1060 mm |
| External Teeth, Diff.Side | 36 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Paired article numbers | 43133 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Upper |
| Weight | 1.44 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 2.140 kg |
| Additional Information | with fastening/mounting material, with gaskets/seals |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.39 kg |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 533 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Weight | 4.1 kg |
| Placement on Vehicle | Front Axle |
| Length | 330 mm |
| Thickness | 80 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Length | 435 mm |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 4.0 kg |
| Placement on Vehicle | Rear Axle |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M22 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 187797 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Weight | 3.047 kg |
| Cone Size | 20 mm |
| Cone Size 1 | 15.7 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 38 mm |
| Placement on Vehicle | Front Axle |
| Length | 1000 mm |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| Weight | 6.15 kg |
| External Thread Size | M20 x 1,5 |
| Width | 52 mm |
| Thickness | 115 mm |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 6.200 kg |
| Function | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Cone Size | 26 mm |
| Colour | Red |
| Rod/Strut | Push Rod |
| Outer diameter | 42 mm |
| Length | 897 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Min. Length | 494 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Additional Information 2 | with screw |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 42 |
| Weight | 6.612 kg |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of hub fastening holes | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| Weight | 8.915 kg |
| External Thread Size | M24 x 1,5 |
| Length | 927 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.09
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Function | Drive Shaft |
| Weight | 7.124 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.07
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
| Paired article numbers | 182078 |
| Weight | 4.514 kg |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.06
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 679 mm |
| Min. Length | 416 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber |
| Weight | 1.85 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.095 kg |
| Function | Chain, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Timing Chain Size | G44-AMD1 |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Weight | 3.360 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 90 mm |
| Outer diameter | 143 mm |
| Inner diameter | 26 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (23369)
- 4x Febi Screw (18396)
£69.05
Important compatibility info
| Weight | 1.51 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Colour | Green |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 1.1 kg |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Cone Size | 24 mm |
| Material | Aluminium |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Weight | 1.15 kg |
| Function | Repair Kit, automatic adjustment |
| Type | Repair Kit, automatic adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.4 kW |
| Weight | 2.8 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Weight | 2.04 kg |
| Height | 41 mm |
| Outer diameter | 167 mm |
| Inner diameter | 46 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Coolant Control Valve |
| Weight | 0.696 kg |
| Extra Description | febi Plus |
| Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Weight | 1.498 kg |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 110 |
| Additional Information 2 | Requires special tools for mounting |
| Timing Chain Size | D67HR |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.05
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196157 |
| Weight | 0.998 kg |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.04
Important compatibility info
| Weight | 1.860 kg |
| Additional Information 2 | with screw |
| Width | 29 mm |
| Outer diameter | 146 mm |
| Inner diameter | 14 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (34846)
- 1x Febi Pulley Bolt (33681)
£69.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023