Important compatibility info
| Additional Information | with gaskets/seals, with fastening/mounting material |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 23 |
| Min. Length | 886 mm |
| Transmission-side joint diameter | 70 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Steel |
| Outer diameter | 276 mm |
| Length | 583 mm |
| Capacity | 30 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 533 mm |
| Outer diameter | 304 mm |
| Inner diameter | 180 mm |
| Type | Air Filter |
| Function | Air Filter |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 44.8 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 4 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Width | 384 mm |
| Length | 328 mm |
| Height | 34 mm |
| Additional Information | with gasket/seal, Oil sump with permanently integrated filter element, with oil drain plug |
| Extra Description | febi Plus |
| Function | Oil sump, automatic transmission |
| Filter type | Screen Filter |
| Type | Oil sump, automatic transmission |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196234 |
| Cone Size | 13.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21446 |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 112 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HC, G53HR |
| Extra Description | Basic Short Kit |
| for OE number | 11 31 1 485 400 S1 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31803)
- 1x Febi Guide, timing chain (37586)
- 1x Febi Tensioner, timing chain (37587)
- 1x Febi Guide, timing chain (37588)
- 1x Febi Screw Plug, timing chain tensioner (37589)
Important compatibility info
| Type | Window Regulator |
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 179344 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 179343 |
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with lid |
| Function | Timing Case Cover |
| Type | Timing Case Cover |
| Extra Description | febi Plus |
| for OE number | 2 487 002 SK1 |
| Additional Information | with crankshaft seal |
| Material | Sheet Steel, FKM (fluorocarbon rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42294 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Colour | black |
| Number of Connectors / Ports | 3 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42293 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Combi Switch Function | with indicator function, with light dimmer function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 21639688 |
| Voltage | 24 V |
| Number of Connectors / Ports | 5 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Replaces | 29329; 29969 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 435 mm |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 36 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M22 x 1,5 |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 24 V |
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Frequency Range | 380 Hz |
| Type | Signal Horn |
| Function | Signal Horn |
| Noise Level | 118 dB |
| Operating Mode | Electric-pneumatic |
| Power Consumption | 30 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 8 |
| Function | V-Ribbed Belt Set |
| Length | 2043 mm |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with tensioner element |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29073)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
Important compatibility info
| Operating Mode | Automatic |
| Width of castor bearing surface | 32 mm |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Outer diameter | 75 mm |
| Material | Metal |
| Width | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1T0 820 036 D |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
| Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 136 |
| Function | Timing Belt Kit |
| Track rollers material | Metal |
| Type | Timing Belt Kit |
| Width | 26 mm |
| Belts | with trapezoidal tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11000)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (06983)
- 1x Febi Tensioner Pulley, timing belt (04751)
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 11 21 000 14R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Outer diameter | 62 mm |
| Width | 34 mm |
| Type | Tensioner Pulley, timing belt |
| Replaces | 26718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter 2 | 136 mm |
| Outer diameter 1 | 63 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 83 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Centre Rod Assembly |
| Pipe Diameter | 42 mm |
| Cone Size | 26 mm |
| Colour | Red |
| Rod/Strut | Push Rod |
| Outer diameter | 42 mm |
| Length | 897 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Length | 927 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal, Aluminium |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 22 11 6 859 846 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Disc Thickness | 28 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 26 mm |
| Function | Brake Disc |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Outer diameter | 319 mm |
| Thickness | 67.2 mm |
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Unit, glow time |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 8 |
| Type | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Shaft Cam | S-cam |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 10476 |
| Length | 676 mm |
| Placement on Vehicle | Left |
| Rotation Direction | Clockwise rotation |
| Outer diameter | 108 mm |
| External Thread Size | M22 x 1,5 |
| Screw length below head | 641 mm |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M28 x 1,5 |
| Internal Thread Size | M12 x 1,5 |
| Type | Multiport Valve |
| Operating pressure to | 10 bar |
| Operating Pressure | 8 bar |
| Function | Multiport Valve |
| Spanner Size | 32 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 82 mm |
| Outer diameter 1 | 64 mm |
| Outer diameter 2 | 152 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 190678, 189887 |
| for OE number | 11 65 7 618 035 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| Min. Length | 617 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Timing Chain Size | G67HR |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 885 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 168 mm |
| Function | Ring, wheel hub |
| Inner diameter | 105 mm |
| Thickness | 24 mm |
| Type | Ring, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 25 |
| Min. Length | 653 mm |
| Wheel Sided Joint Diameter | 77 mm |
| Transmission-side joint diameter | 76 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 90 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour Coding | green |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
| Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































