Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 72 |
| Timing Chain Size | G68HSF-5 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 70 mm |
| Width | 110 mm |
| Thickness | 36.5 mm |
| Voltage | 28 V |
| Number of Connectors / Ports | 5 |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Hole Spacing | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 476 mm |
| Outer diameter | 267 mm |
| Inner diameter | 170 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | after soot particulate filter |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03G 906 088 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cable Repair Set, door |
| Number of circuits | 12 |
| Cable Length | 200 mm |
| Paired article numbers | 107150 |
| Additional Information 2 | with bellow |
| Additional Information | with squeeze connector |
| Placement on Vehicle | Rear, both sides |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 196157 |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 679 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Adjustable | not adjustable |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Thickness | 59.4 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 314 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 312 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 294 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 285 mm |
| Diameter | 1 mm |
| Thickness | 41 mm |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 36 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 33.5 mm |
| Placement on Vehicle | Rear Axle |
| Length | 442 mm |
| Diameter | 38 mm |
| Rod/Strut | Coupling Rod |
| External Thread Size | M24 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 33.2 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.4 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 14226 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Upper Front Axle, Left |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Outer diameter | 126 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| for OE number | 26 11 7 527 392 S2 |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26332)
- 1x Febi Assembly Kit, propshaft joint (43513)
Important compatibility info
| Function | Electric Motor, window regulator |
| Placement on Vehicle | both sides |
| Voltage | 24 V |
| Number of Teeth | 9 |
| Number of Connectors / Ports | 6 |
| Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle Right, Centre |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Paired article numbers | 174048 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
| Outer diameter | 109 mm |
| Function | Bushing, axle beam |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
| Thickness | 93 mm |
| Inner diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 42 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Width of castor bearing surface | 28.5 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Inner diameter | 15 mm |
| Mounting points diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 178066 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179257 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 19 mm |
| Number of Teeth | 135 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14608)
- 1x Febi Water Pump, engine cooling (18124)
Important compatibility info
| Extra Description | febi Plus |
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Function | Housing, oil filter |
| Type | Housing, oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Screw length below head | 325 mm |
| Length | 731 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 179420 |
| Placement on Vehicle | Left Front |
| Number of Teeth | 26 |
| Outer diameter | 97 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 50.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 223 mm |
| Outer diameter | 40 mm. 55 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10557)
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 6 859 408 |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
| Paired article numbers | 177769 |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| for OE number | 7H0 965 561 |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Glow Plug Type | Metal glow plug |
| Spanner Size | 12 |
| Fitting Depth | 30 mm |
| Function | Glow Plug |
| Length | 138.5 mm |
| Voltage | 11 V |
| External Thread Size | M10 x 1,25 |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 90919-02230 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Centering Diameter | 75 mm |
| Thickness | 76.1 mm |
| Minimum thickness | 18.4 mm |
| Outer diameter | 300 mm |
| Placement on Vehicle | Rear Axle |
| Bolt Hole Circle Diameter | 120 mm |
| Brake Disc Thickness | 20 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 38484 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (21559)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 32072 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 32071 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30517 |
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Pull Rod |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with screw, with bearing |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 345 mm |
| Width | 236 mm |
| Thickness | 237 mm |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 210 mm |
| Height | 117 mm |
| Width | 135 mm |
| Material | Rubber/Metal |
| Function | Bush, parabolic spring |
| Type | Bush, parabolic spring |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 174781 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 174778 |
| Cone Size | 23.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing |
| Steering arm type | Control Arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 23.7 mm |
| Paired article numbers | 174777 |
| Steering arm type | Control Arm |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ABS sensor ring |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 70 mm |
| Inner diameter 2 | 50 mm |
| Outer diameter 1 | 130 mm |
| Width 1 | 57 mm |
| Outer diameter 2 | 110 mm |
| Width 2 | 42.3 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04259)
- 1x Febi Wheel Bearing (07900)
- 1x Febi Shaft Seal (107571)
- 1x Febi Washer (11337)
- 1x Febi Washer (11338)
Important compatibility info
| Length | 1015 mm |
| Height | 14 mm |
| Width | 325 mm |
| Mounting points diameter | 13 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Housing material | Aluminium |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Slave Cylinder, engine brake |
| Outer diameter | 44 mm |
| External Thread Size | M8 x 1 |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PTFE (polytetrafluoroethylene) |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 132 mm |
| Outer diameter | 132 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































