Important compatibility info
Weight | 3.849 kg |
Outer diameter | 53 mm |
Length | 235 mm |
Function | Kingpin |
Type | Kingpin |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Max. Length | 370 mm |
Min. Length | 330 mm |
Pipe Diameter | 38 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 3.8 kg |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 3.617 kg |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Cast Steel |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 43693 |
Cone Size | 22 mm. 19 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Weight | 0.295 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 88 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Weight | 1.340 kg |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Water pump impeller material | Metal |
Seal Material | Rubber |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Number of Wings | 7 |
Weight | 0.97 kg |
Additional Information | with gasket/seal |
for OE number | 16100-80014 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 30516 |
Placement on Vehicle | Front Axle Right, Lower, Front |
Weight | 1.94 kg |
Function | Control/Trailing Arm, wheel suspension |
Rod/Strut | Pull Rod |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with screw, with bearing, with ball joint |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 20 mm |
Outer diameter | 486 mm |
Inner diameter | 432 mm |
Number of Teeth | 137 |
Weight | 5.114 kg |
Type | Ring Gear, flywheel |
Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.600 kg |
Type | Ball Joint |
Thickness | 160 mm |
Diameter 1 | 110 mm |
Steering arm type | for control arm |
Function | Ball Joint |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with crown nut |
Extra Description | ProKit |
External Thread Size | M30 x 1,5, M85 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 44506; 44507 |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 142 |
Function | Timing Chain Kit |
Extra Description | Basic Short Kit |
Timing Chain Size | G53HP, G53HR |
Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (26012)
- 1x Febi Tensioner, timing chain (26751)
- 1x Febi Lock Cover, timing chain tensioner (mounting hole) (38327)
Important compatibility info
Weight | 2.0 kg |
Min. Length | 243 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12 mm |
Type | Shock Absorber, driver cab suspension |
Placement on Vehicle | Front |
External Thread Size | M12 x 1,25 |
Max. Length | 346 mm |
Function | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Pneumatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Weight | 0.394 kg |
Timing Chain Size | G53RING-1 |
Number of Chain Links | 142 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Exhaust Side |
Paired article numbers | 177769 |
Extra Description | febi Plus |
Weight | 0.297 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.8 kg |
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 174728 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Paired article numbers | 193011 |
Weight | 0.36 kg |
Type | Lens, tail light assembly |
Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.8 kg |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Additional Information 2 | with rubber mount, with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 174729 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 19731 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | with washers, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wheel Sided Joint Diameter | 80.9 mm |
ABS Ring Diameter | 81 mm |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Right |
Min. Length | 610 mm |
Mounting bores distance | 6 mm |
Weight | 6.494 kg |
Bolt Hole Circle Diameter | 104.1 mm |
Bore Diameter | 11 mm |
External Teeth, Wheel Side | 38 |
Thread Size | M16 x 1,5 |
Transmission-side joint diameter | 81.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Weight | 0.95 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Outer diameter 1 | 73 mm |
Type | Wheel Bearing Kit |
Outer diameter 2 | 139 mm |
Weight | 3.880 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37.5 mm |
Outer diameter | 87 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Inner diameter | 29 mm |
Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (173917)
Important compatibility info
Bore Diameter | 40 mm |
Rod/Strut | Guide Rod |
Additional Information | with rubber-metal mounts |
Diameter | 1 mm |
Length | 420 mm |
Placement on Vehicle | Rear Axle |
Weight | 5.900 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.27 kg |
Material | Cast Aluminium |
Number of Teeth | 6 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | from 2nd idler arm to the controlled rear axle |
Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
Cone Size | 30 mm |
External Thread Size | M24 x 1,5 |
Function | Centre Rod Assembly |
Pipe Diameter | 40 mm |
Rod/Strut | Push Rod |
Outer diameter | 40 mm |
Length | 495 mm |
Weight | 5.72 kg |
Additional Information | with castellated nut and split pins |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.8 kg |
Placement on Vehicle | Front Axle |
Length | 996 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 18 mm |
Placement on Vehicle | both sides |
Housing length | 306 mm |
Piston conrod diameter | 8 mm |
Mounting points diameter | 16.5 mm |
Length | 556 mm |
Eject Force | 575 N |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Stroke | 179 mm |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 193014 |
Weight | 0.36 kg |
Type | Lens, tail light assembly |
Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.169 kg |
Function | Sensor, boost pressure |
Type | Sensor, boost pressure |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Weight | 5.940 kg |
Placement on Vehicle | Front Axle |
Length | 590 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 430 mm |
Outer diameter | 480.5 mm |
Width | 22 mm |
Weight | 5.500 kg |
Number of Teeth | 158 |
Function | Ring Gear, flywheel |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 94 mm |
Wheel Sided Joint Diameter | 89 mm |
Min. Length | 472 mm |
Weight | 4.816 kg |
External Teeth, Wheel Side | 36 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 74.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.94 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 30517 |
Function | Control/Trailing Arm, wheel suspension |
Rod/Strut | Pull Rod |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing, with screw |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.170 kg |
Type | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.112 kg |
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
for OE number | 1028A109 |
Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.559 kg |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Cast Steel |
Inner diameter | 14 mm |
Steering arm type | Control Arm |
Paired article numbers | 44981 |
Cone Size | 26.8 mm. 23.2 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with ball joint, with rubber mount |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Paired article numbers | 179807 |
Placement on Vehicle | Left, Front Axle |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.259 kg |
Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 174778 |
Cone Size | 23.7 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front |
Weight | 2.658 kg |
Material | Aluminium |
Additional Information 2 | with ball joint, with bearing |
Steering arm type | Control Arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Additional Information | without electric motor |
Operating Mode | Electric |
Type | Window Regulator |
Weight | 1.4 kg |
Paired article numbers | 177821 |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Max. Length | 300 mm |
Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Weight | 3.46 kg |
Operating Mode | Mechanical |
Min. Length | 210 mm |
Pipe Diameter | 92 mm. 45 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Additional Information | with adjuster |
Number of Connectors / Ports | 8 |
Type | Door Lock |
Extra Description | febi Plus |
Placement on Vehicle | Left Front |
Paired article numbers | 179672 |
Function | Door Lock |
Weight | 0.627 kg |
Lock System | with double sealing |
Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 111 |
Surface | Coated |
Width of castor bearing surface | 19 mm |
Weight | 1.287 kg |
Width | 17 mm |
Belts | with rounded tooth profile |
for OE number | 16 06 368 S1 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (14115)
- 1x Febi Water Pump, engine cooling (24333)
Important compatibility info
Weight | 3.42 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 147 mm |
Thickness | 85 mm |
Inner diameter | 35 mm |
Number of Holes | 5 |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (47315)
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 177819 |
Weight | 1.4 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27946 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.32 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Inner diameter 1 | 12 mm |
Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.288 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 47733 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (44518)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 55 mm |
Outer diameter | 67 mm. 137 mm |
Inner diameter | 25 mm |
Bolt Hole Circle Diameter | 114 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Weight | 2.68 kg |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 450 mm |
Thickness | 120 mm |
Number of Connectors / Ports | 2 |
Rated Power | 400 W |
Number of Wings | 6 |
Function | Fan, engine cooling |
Weight | 2.67 kg |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.14 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Paired article numbers | 42292 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle, Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 27947 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.32 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.14 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 42291 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 228 mm. 200 mm |
Function | Bellow, air suspension |
Rolling piston material | Plastic |
Weight | 6.0 kg |
Thickness | 175 mm. 525 mm |
External Thread Size | M12 x 1,5, M8 x 1,25, M22 x 1,5, M12 x 1,75 |
Type | Bellow, air suspension |
Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023