Important compatibility info
Material | Plastic |
Inner diameter | 19.05 mm |
Type | Master Cylinder, clutch |
Function | Master Cylinder, clutch |
Important compatibility info
Replaces | BWP1800 |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Bolt Diameter | 65 mm |
Important compatibility info
Inner Brake Drum Diameter | 228 mm |
Width | 42 mm |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Thread Type | with internal thread |
Length | 394 mm |
Thread Size | M10x1 |
Function | Brake Hose |
Type | Brake Hose |
Additional Information | with banjo fitting |
Additional Information 2 | with banjo bolt |
Mounting Bolt Thread Size | M10x1 |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Length 1 | 1688 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Important compatibility info
Replaces | BTS327.87 |
Opening Temperature | 87 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Aluminium |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Important compatibility info
Inner diameter | 16 mm |
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Height | 66 mm |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5345 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 1 | M16x1.5 |
Function | Tie Rod |
Type | Tie Rod |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Number of Teeth | 26 |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Length 1 | 1665 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Left Rear |
Important compatibility info
Outer diameter | 11 mm |
Length | 361 mm |
Width | 147 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Inner diameter | 10 mm |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5802 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6714)
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA5801 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6714)
Important compatibility info
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | FCA7830 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6265 |
Important compatibility info
Water Pump Pulley Diameter | 59 mm |
Additional Information | with gaskets/seals |
Impeller Diameter | 71 mm |
Function | Water Pump, engine cooling |
Housing Type | without housing |
Type | Water Pump, engine cooling |
Important compatibility info
Material | Silicone |
Replaced by | BTH1383 |
Outer diameter 1 | 49 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Colour | Black |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1104S)
Important compatibility info
Thread Size | M24X2 |
Internal Teeth, wheel side | 34 |
Length | 170 mm |
Additional Information 2 | with groove |
External Teeth, Wheel Side | 30 |
Function | Joint Kit, drive shaft |
Seal Diameter | 54 mm |
Type | Joint Kit, drive shaft |
Important compatibility info
Function | Brake Hose |
Length | 395 mm |
Type | Brake Hose |
Placement on Vehicle | Front Axle Left |
Additional Information | with banjo fitting |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Thread Type | with internal thread |
Mounting Bolt Thread Size | M10x1 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023