Proud to be a UK-based company
Contact us
Important compatibility info
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Weight | 0.95 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Outer diameter | 52 mm |
| Length | 1059 mm |
| Weight | 10.000 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 4.665 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 337 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 80 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 0.169 kg |
| Function | Sensor, boost pressure |
| Type | Sensor, boost pressure |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Paired article numbers | 15905 |
| Additional Information | with Thrust Bearing |
| Length | 222.5 mm |
| Outer diameter | 50 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Rear Axle, Front Axle Right |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Weight | 5.103 kg |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (15890)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Spacer, kingpin (15891)
£66.12
Important compatibility info
| Replaces | 44506; 44507 |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 142 |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Timing Chain Size | G53HP, G53HR |
| Type | Timing Chain Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (26012)
- 1x Febi Tensioner, timing chain (26751)
- 1x Febi Lock Cover, timing chain tensioner (mounting hole) (38327)
£66.12
Important compatibility info
| Operating Mode | Electric |
| Additional Information | with adjuster |
| Number of Connectors / Ports | 8 |
| Type | Door Lock |
| Extra Description | febi Plus |
| Placement on Vehicle | Left Front |
| Paired article numbers | 179672 |
| Function | Door Lock |
| Weight | 0.627 kg |
| Lock System | with double sealing |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 1.4 kg |
| Type | Window Regulator |
| Function | Window Regulator |
| Placement on Vehicle | Right Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 179344 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 1.516 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21446 |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 6.731 kg |
| Type | Cylinder Liner |
| Function | Cylinder Liner |
| for OE number | 51.01201.0468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 0.481 kg |
| Function | Ignition Coil |
| Ignition Coil | 2 Spark |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Length | 1345 mm |
| Number of Ribs | 6 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Weight | 0.199 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (182094)
- 1x Febi Belt Tensioner, v-ribbed belt (40898)
£66.12
Important compatibility info
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Additional Information | with gaskets/seals |
| Material | Cast Aluminium |
| Weight | 2.040 kg |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21445 |
| Placement on Vehicle | Front Axle Right, Upper |
| Weight | 1.503 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Thread Length | 33.5 mm |
| Placement on Vehicle | Rear Axle |
| Length | 442 mm |
| Diameter | 38 mm |
| Rod/Strut | Coupling Rod |
| External Thread Size | M24 x 1,5 |
| Weight | 4.72 kg |
| Function | Link/Coupling Rod, stabiliser bar |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 27946 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.32 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Inner diameter 1 | 12 mm |
| Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 1.27 kg |
| Material | Cast Aluminium |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 6.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 996 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Placement on Vehicle | from 2nd idler arm to the controlled rear axle |
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 40 mm |
| Length | 495 mm |
| Weight | 5.72 kg |
| Additional Information | with castellated nut and split pins |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Weight | 2.1 kg |
| Placement on Vehicle | Rear |
| Paired article numbers | 178447 |
| Max. Length | 265 mm |
| Min. Length | 262 mm |
| Pipe Diameter | 70 mm. 78 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 27947 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.32 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Bore Diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 2.260 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33277)
- 1x Febi Bellow, drive shaft (14908)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£66.12
Important compatibility info
| Weight | 2.288 kg |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 47732 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with bolts/screws |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (44519)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
£66.12
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 34821 |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Weight | 2.52 kg |
| Outer diameter | 65 mm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Additional Information 2 | with bearing, with ball joint |
| Cone Size 2 | 19 mm |
| Cone Size | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (34820)
- 1x Febi Nut (34818)
£66.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Outer diameter | 24 mm |
| Function | Tie Rod |
| Length | 897 mm |
| Steering | with tie rod ends |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Thread Length | 17 mm |
| Weight | 4.5 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 19731 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.100 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with washers, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 193014 |
| Weight | 0.36 kg |
| Type | Lens, tail light assembly |
| Function | Lens, tail light assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 1.015 kg |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 29832 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 136 mm |
| Outer diameter | 136 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 64 mm |
| Inner diameter | 30 mm |
| Number of Holes | 6 |
| Weight | 3.88 kg |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Function | Gasket, oil cooler |
| Material | Rubber/Metal |
| Weight | 0.096 kg |
| Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Type | Connecting Rod |
| Function | Connecting Rod |
| Weight | 1.701 kg |
| for OE number | 51.02400.6230 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Material | Plastic |
| Voltage | 12 V |
| Type | Auxiliary water pump (cooling water circuit) |
| Weight | 0.18 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 4.100 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 19733 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with washers, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Weight | 5.940 kg |
| Placement on Vehicle | Front Axle |
| Length | 590 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Operating Mode | Electric |
| Paired article numbers | 179343 |
| Weight | 1.4 kg |
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Weight | 0.394 kg |
| Timing Chain Size | G53RING-1 |
| Number of Chain Links | 142 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1082 mm |
| Function | Sensor, exhaust gas temperature |
| Spanner Size | 17 |
| External Thread Size | M14 x 1,5 |
| Weight | 0.07 kg |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.11
Important compatibility info
| Inner diameter | 228.3 mm |
| Rim Hole Number | 5 -Hole |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.5 mm |
| Function | Brake Drum |
| Thickness | 66 mm |
| Outer diameter | 271 mm |
| Width | 55.5 mm |
| Type | Brake Drum |
| Max.skimmed drum measure | 230.2 mm |
| Number of mounting bores | 2 |
| Weight | 6.3 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.11
Important compatibility info
| Inner diameter | 430 mm |
| Outer diameter | 480.5 mm |
| Width | 22 mm |
| Weight | 5.500 kg |
| Number of Teeth | 158 |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.09
Important compatibility info
| Outer diameter | 450 mm |
| Thickness | 120 mm |
| Number of Connectors / Ports | 2 |
| Rated Power | 400 W |
| Number of Wings | 6 |
| Function | Fan, engine cooling |
| Weight | 2.67 kg |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Weight | 0.94 kg |
| Placement on Vehicle | Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Weight | 2.8 kg |
| Length | 430 mm |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (27300)
- 1x Febi Screw Plug, oil sump (101250)
£66.08
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Weight | 1.9 kg |
| Paired article numbers | 102748 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| for OE number | 11 28 7 549 589 |
| Weight | 0.672 kg |
| Width of castor bearing surface | 24.5 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Weight | 6.586 kg |
| External Teeth, Diff.Side | 34 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Min. Length | 604 mm |
| Wheel Sided Joint Diameter | 91 mm |
| External Teeth, Wheel Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24 x 1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Weight | 0.227 kg |
| Length | 704 mm. 683 mm |
| Material | MVQ (silicone rubber) |
| Inner diameter | 3 mm |
| Function | Hose Line, soot/particulate filter regeneration |
| Extra Description | febi Plus |
| Type | Hose Line, soot/particulate filter regeneration |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Function | Oil Cooler, automatic transmission |
| for OE number | 096 409 061 E |
| Weight | 0.78 kg |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.08
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Bolt Hole Circle Diameter | 105 mm |
| Centering Diameter | 60 mm |
| Minimum thickness | 23 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 45.5 mm |
| Outer diameter | 300 mm |
| Placement on Vehicle | Front Axle |
| Weight | 8.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.06
Important compatibility info
| Paired article numbers | 179406 |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 5.230 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.06
Important compatibility info
| Function | Repair Kit, driver cab suspension |
| Type | Repair Kit, driver cab suspension |
| Weight | 1.008 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023