Important compatibility info
Weight | 1.4 kg |
Voltage | 12 V |
Type | Interior Blower |
Function | Interior Blower |
Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Upper |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 101278 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.427 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Seal Kit, multi-valve |
Function | Seal Kit, multi-valve |
Weight | 0.65 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 32 mm |
Length | 387 mm |
Rod/Strut | Push Rod |
Pipe Diameter | 36 mm |
Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M27 x 1,5 |
Weight | 4.18 kg |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ring Gear, flywheel |
Width | 18 mm |
Outer diameter | 475 mm |
Inner diameter | 430 mm |
Number of Teeth | 148 |
Weight | 3.734 kg |
Type | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 70 mm |
Width | 45 mm |
Function | Tensioner, timing chain |
Weight | 0.123 kg |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.500 kg |
for OE number | 20889546 SK3 |
Type | Sealing Set, air compressor |
Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 688 mm |
Weight | 0.743 kg |
for OE number | 21100909 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.021 kg |
Placement on Vehicle | Front Axle Right, Front, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 44518 |
Outer Length | 470 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (33625)
- 1x Febi Nut, ball joint (23696)
Important compatibility info
Weight | 0.889 kg |
Outer diameter | 73 mm |
Number of Ribs | 6 |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 25 mm |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 022 145 299 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023