Proud to be a UK-based company
Contact us
Important compatibility info
| Housing length | 152 mm |
| Mounting points diameter | 10 mm |
| Length | 253 mm |
| Eject Force | 1900 N |
| Stroke | 67 mm |
| Housing Diameter | 35 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 32 mm |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, external planetary gearbox (17547)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Ring, wheel hub (04454)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Sensor Ring, ABS (18612)
£64.14
Important compatibility info
| Thickness | 156 mm |
| Colour | Black |
| Type | Roll-off Piston, air suspension bellows |
| Outer diameter | 208 mm. 249 mm |
| Placement on Vehicle | Rear Axle |
| Function | Roll-off Piston, air suspension bellows |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Pipe Diameter | 45 mm. 63 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 15 mm |
| Min. Length | 228 mm |
| Operating Mode | Mechanical |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 296 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Additional Information 2 | without wheel bearing |
| Placement on Vehicle | Front Axle |
| Outer diameter | 146 mm |
| Inner diameter | 95.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M28 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 875 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 36 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Placement on Vehicle | Front Axle |
| Cone Size | 17.5 mm |
| Pipe Diameter | 22 mm |
| Type | Tie Rod |
| Function | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Rotation Direction | Clockwise rotation |
| Screw length below head | 325 mm |
| Length | 731 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 179420 |
| Placement on Vehicle | Left Front |
| Number of Teeth | 26 |
| Outer diameter | 97 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Type | Brake Shaft, drum brake |
| Number of Teeth | 26 |
| Length | 731 mm |
| Outer diameter | 97 mm |
| Screw length below head | 325 mm |
| Paired article numbers | 179419 |
| Placement on Vehicle | Right Front |
| Rotation Direction | Anticlockwise rotation |
| Function | Brake Shaft, drum brake |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Inner length 2 | 879 mm |
| Inner length 1 | 855 mm |
| Outer length 1 | 1160 mm |
| Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Thread Size | M16 x 1,5 |
| Additional Information 2 | with bolts/screws |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 794 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 79 mm |
| Min. Length | 944 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Transmission-side joint diameter | 81.5 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Bolt Hole Circle Diameter | 116 mm |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Width | 90 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
| Additional Information 2 | with ABS sensor ring |
| Outer diameter | 148 mm |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 762 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M27 x 1,5 |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 39 |
| Min. Length | 642 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Material | Metal |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
| Width of castor bearing surface | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Outer diameter 2 | 151 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Bolt Hole Circle Diameter | 115 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter | 91 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter 1 | 70.5 mm |
| Inner diameter | 34 mm |
| Replaces | 172488 |
| Bearing Type | Angular Ball Bearing |
| Width | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Outer diameter | 93 mm |
| Width | 55 mm |
| Placement on Vehicle | Rear Axle |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (174134)
£64.14
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 74 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 63 mm |
| Outer diameter 2 | 136 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023