Important compatibility info
| Placement on Vehicle | Rear, Rear Axle |
| Length | 50 mm. 56 mm |
| Material | Rubber/Metal |
| Outer diameter | 55 mm |
| Inner diameter | 20 mm |
| Type | Mounting, stabiliser bar |
| Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 65 mm |
| Width | 60 mm |
| Thickness | 12 mm |
| Function | Pedal Pad, brake pedal / Pedal Pad, clutch pedal |
| Type | Pedal Pad, brake pedal / Pedal Pad, clutch pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 79 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (09856)
- 1x Febi Seal, thermostat (10390)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
| Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (18201)
- 1x Febi Seal Ring, wheel hub (09827)
- 1x Febi Shaft Seal, wheel bearing (18200)
- 4x Febi Seal Ring, wheel hub (02191)
- 2x Febi Circlip, brake anchor pin (04767)
- 1x Febi Washer (10405)
Important compatibility info
| Length | 20.5 mm |
| Outer diameter | 25 mm |
| Inner diameter | 12 mm |
| Spanner Size | 19 |
| Thread Pitch | 1.5 mm |
| Function | Spring Clamp Nut |
| Quality/ Grade | 10 |
| Internal Thread Size | M14 x 1,5 |
| Bolt Head/Nut Design | External Hexagon |
| Type | Spring Clamp Nut |
| Surface | Phosphatized |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 1 328 010 S1 |
| Function | Mounting Kit, shock absorber |
| Type | Mounting Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (10438)
- 1x Febi Nut (10439)
- 1x Febi Washer (10403)
- 1x Febi Spacer Sleeve (10061)
Important compatibility info
| Brake Shaft Cam | S-cam |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 10476 |
| Length | 676 mm |
| Placement on Vehicle | Left |
| Rotation Direction | Clockwise rotation |
| Outer diameter | 108 mm |
| External Thread Size | M22 x 1,5 |
| Screw length below head | 641 mm |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Thickness | 25 mm |
| Function | Rubber Buffer, suspension |
| Hole Spacing | 102 mm |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with right-hand thread |
| DIN / ISO | 71802 |
| Additional Information 2 | with nut |
| External Thread Size | M8 x 1,25 |
| Extra Description | ProKit |
| Type | Angled Ball Joint |
| Function | Angled Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 79 °C |
| Heating / Cooling | without vent hole |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Door Check |
| Function | Door Check |
| Placement on Vehicle | Left, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 14 mm |
| Function | Mounting, stabiliser bar |
| Thickness | 51 mm |
| Outer diameter | 37 mm |
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 380 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 180 mm |
| Surface | Coated |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle, Front Axle |
| Internal Thread Size | M18 x 1,5 |
| Rim Hole Number | 8 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 30 mm |
| Stroke | 45 mm |
| Function | Slave Cylinder |
| Type | Slave Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 44 mm |
| Length | 180 mm |
| Type | Slave Cylinder, engine brake |
| Function | Slave Cylinder, engine brake |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M12 x 1,5 |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 304 mm |
| Thickness | 120 mm |
| Brake Disc Thickness | 30 mm |
| Rotor Style | Internally Vented |
| Centering Diameter | 151 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 120 mm |
| Brake Disc Thickness | 30 mm |
| Centering Diameter | 157 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Surface | Coated |
| Internal Thread Size | M12 x 1,5 |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Width | 102.5 mm |
| Outer diameter | 335 mm |
| Thickness | 102 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Inner diameter | 14.5 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 374 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Brake Disc Thickness | 22 mm |
| Brake Disc Type | Solid |
| Inner diameter | 16.5 mm |
| Number of Holes | 10 |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Mounting points diameter | 16.5 mm |
| Function | Brake Disc |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Hole Circle Diameter | 177 mm |
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 335 mm |
| Thickness | 111 mm |
| Brake Disc Thickness | 34 mm |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M12 x 1,5 |
| Type | Brake Disc |
| for OE number | 970 423 12 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 28.6 mm |
| Pipe Diameter | 35 mm |
| Length | 120 mm |
| Placement on Vehicle | Front Axle |
| Thread Type | with right-hand thread |
| External Thread Size | M30 x 1,5 RHT, M20 x 1,5 |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
| for OE number | 403 200 77 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, wheel bearing |
| Number of Teeth | 80 |
| Inner diameter | 81 mm |
| Outer diameter | 96 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 10 mm |
| Material | FPM (fluoride rubber) |
| Type | Shaft Seal, wheel bearing |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Rear |
| Material | FPM (fluoride rubber) |
| Outer diameter | 97 mm |
| Thickness | 10 mm. 18 mm |
| Inner diameter | 52 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ABS sensor ring |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 70 mm |
| Inner diameter 2 | 50 mm |
| Outer diameter 1 | 130 mm |
| Width 1 | 57 mm |
| Outer diameter 2 | 110 mm |
| Width 2 | 42.3 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04259)
- 1x Febi Wheel Bearing (07900)
- 1x Febi Shaft Seal (107571)
- 1x Febi Washer (11337)
- 1x Febi Washer (11338)
Important compatibility info
| Seal Material | Paper, Rubber |
| Housing material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 51.06500.6708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Water pump impeller material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Housing material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 156.4 mm |
| Outer diameter | 29.5 mm. 30 mm |
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (11372)
- 1x Febi Bush, kingpin (11380)
- 1x Febi Bush, steering knuckle (11381)
- 2x Febi Seal Ring, steering knuckle (11370)
- 2x Febi Seal Ring, steering knuckle (11371)
- 2x Febi Circlip (02665)
- 2x Febi Grease Nipple (01094)
- 2x Febi Lock Ring, steering knuckle (11373)
- 1x Febi Spacer, kingpin (11375)
- 1x Febi Spacer, kingpin (11376)
- 1x Febi Spacer, kingpin (11377)
- 1x Febi Spacer, kingpin (11378)
- 1x Febi Spacer, kingpin (11379)
- 1x Febi Spacer, kingpin (11374)
Important compatibility info
| Outer diameter | 100 mm. 81 mm |
| Width | 40 mm |
| Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Inner diameter | 55 mm |
| Function | Wheel Bearing |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sleeve, stabiliser mounting |
| Inner diameter | 16.5 mm |
| Length | 44.7 mm |
| Outer diameter | 25 mm |
| Type | Sleeve, stabiliser mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting Kit, stabiliser bar |
| Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (05428)
- 1x Febi Sleeve, stabiliser mounting (11463)
- 1x Febi Fastening Bolt, stabiliser bar (11465)
- 1x Febi Nut (10439)
Important compatibility info
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 60 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 60 °C |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 81 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (11848)
- 1x Febi Seal, thermostat (11834)
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Cone Size | 30 mm |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Length | 325 mm |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Control Type | Rocker Actuation |
| Colour Coding | Yellow |
| Number of Connectors / Ports | 6 |
| Voltage | 24 V |
| Type | Switch, headlight |
| Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Hazard Warning Light Switch |
| Function | Hazard Warning Light Switch |
| Control Type | Toggle Actuation |
| Voltage | 24 V |
| Housing Colour | Black |
| Colour | Red |
| Number of Connectors / Ports | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Operating Mode | Pneumatic |
| Spanner Size | 27 |
| Thread Length | 14 mm |
| Number of Connectors / Ports | 2 |
| Function | Pressure Switch |
| Switch point from | 5.1 bar |
| Switch point to | 5.7 bar |
| Type | Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Material | Metal |
| Operating Mode | Pneumatic |
| Spanner Size | 27 |
| Thread Length | 14 mm |
| Number of Connectors / Ports | 2 |
| Control Type | Push Actuation |
| Function | Pressure Switch |
| Switch point from | 0.1 bar |
| Switch point to | 0.5 bar |
| Type | Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 105 mm |
| Outer diameter | 42 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Length | 144 mm |
| Outer diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint, propshaft |
| Outer diameter | 53 mm |
| Length | 150 mm |
| Replaces | 23837 |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Opening Pressure | 0.75 bar |
| for OE number | 1674083 |
| Type | Cap, coolant tank |
| Function | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cap, fuel tank |
| Outer diameter | 60 mm |
| Lock System | with two keys, with lock |
| Type | Cap, fuel tank |
| Additional Information | with gasket/seal |
| for OE number | 1079940 |
| Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 64 mm. 55 mm |
| Function | Mounting, stabiliser bar |
| Inner diameter | 28 mm |
| Outer diameter | 57.5 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle, Front Axle, outer |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pump Type | Mono Pump |
| Number of Connectors / Ports | 2 |
| Voltage | 24 V |
| for OE number | 1606929 |
| Type | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Voltage | 24 V |
| Pump Type | Mono Pump |
| for OE number | 1585878 |
| Type | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
| Function | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































