Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 70 |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | Z46VC |
| Type | Chain Kit, oil pump drive |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 183109 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 182040 |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, external planetary gearbox |
| Type | Gasket Set, external planetary gearbox |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, external planetary gearbox (17547)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Ring, wheel hub (04454)
- 1x Febi Thrust Washer, external planetary gearbox (24759)
- 1x Febi Sensor Ring, ABS (18612)
Important compatibility info
| Function | Sensor, exhaust pressure |
| Number of Connectors / Ports | 3 |
| Sensor Type | Differential Pressure Sensor |
| Type | Sensor, exhaust pressure |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 39 |
| External Teeth, Wheel Side | 27 |
| Type | Drive Shaft |
| Min. Length | 693 mm |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Control Element, parking brake caliper |
| Type | Control Element, parking brake caliper |
| Placement on Vehicle | Rear Axle Left |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 194745 |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 12622 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with hydro mount, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12621)
- 1x Febi Mounting, control/trailing arm (09005)
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | behind exhaust turbocharger |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 950 mm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle |
| Stabiliser Diameter | 19 mm |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, stabiliser bush (37069)
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 45.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Parameter | 7 PK |
| Type | Belt Pulley, crankshaft |
| Width | 30 mm |
| Outer diameter | 163 mm |
| Inner diameter | 38 mm |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44519 |
| Outer Length | 470 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (33625)
- 1x Febi Nut, ball joint (23696)
Important compatibility info
| Operating Mode | Automatic |
| Function | V-Ribbed Belt Set |
| Track rollers material | Plastic |
| Additional Information 2 | with tensioner element |
| Outer diameter | 65 mm |
| Type | V-Ribbed Belt Set |
| Width of castor bearing surface | 26 mm |
| Length | 1163 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28930)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
Important compatibility info
| Material | Aluminium |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with venting hoses |
| Number of hoses | 1 |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 172 mm |
| Outer diameter | 32 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with plain bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (29731)
- 1x Febi Bush, steering knuckle (29732)
- 2x Febi Bush, steering knuckle (44164)
- 2x Febi Seal Ring, steering knuckle (29735)
- 1x Febi Seal Ring, steering knuckle (29737)
- 1x Febi Seal Ring, steering knuckle (29736)
- 1x Febi Bush, kingpin (29733)
- 1x Febi Spacer, kingpin (29740)
- 1x Febi Spacer, kingpin (29741)
- 1x Febi Spacer, kingpin (29742)
- 1x Febi Spacer, kingpin (29743)
Important compatibility info
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 20 |
| Min. Length | 650 mm |
| ABS Ring Diameter | 80 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Parameter | 6 |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 13 mm |
| Outer diameter | 150 mm |
| Width | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 22787 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















