Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Piston, air compressor |
| Outer diameter | 92 mm |
| Function | Piston, air compressor |
| Weight | 0.46 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.82
Important compatibility info
| Inner diameter | 19 mm |
| Number of Ribs | 5 |
| Type | Belt Pulley, crankshaft |
| Parameter | 6 PK |
| Width | 40 mm |
| Outer diameter | 135 mm |
| Function | Belt Pulley, crankshaft |
| Weight | 1.130 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.80
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Bore Diameter | 19 mm |
| Weight | 0.130 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.78
Important compatibility info
| Type | Oxygen Sensor |
| Cable Length | 710 mm |
| Function | Oxygen Sensor |
| Weight | 0.096 kg |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.77
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.8 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.77
Important compatibility info
| Control Type | Rotary Operation |
| Number of Connectors / Ports | 14 |
| Switch | with dimmer switch |
| Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
| Switch Lighting | Yellow |
| Weight | 0.099 kg |
| Type | Switch, headlight |
| Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.75
Important compatibility info
| Number of Teeth | 129 |
| Outer diameter | 393 mm |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
| Weight | 1.524 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.74
Important compatibility info
| Rolling piston material | Plastic |
| External Thread Size | M12 x 1,75 |
| Outer diameter | 259 mm. 200 mm |
| Thickness | 175 mm. 400 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 7.0 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.74
Important compatibility info
| Weight | 1.850 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| for OE number | 6Q0 199 167 DJ |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.73
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Length | 950 mm |
| Placement on Vehicle | Front Axle |
| Weight | 3.93 kg |
| Extra Description | ProKit |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (37073)
- 1x Febi Repair Kit, stabiliser bush (37079)
£60.72
Important compatibility info
| Type | Gear, air compressor |
| Weight | 0.480 kg |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.72
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 0.566 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.72
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21.5 mm |
| Weight | 2.408 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing, with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Paired article numbers | 177707 |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (170529)
- 1x Febi Nut (43739)
£60.71
Important compatibility info
| Placement on Vehicle | Lower Left |
| Weight | 0.600 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.71
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21.5 mm |
| Weight | 2.408 kg |
| Paired article numbers | 177708 |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing, with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (170530)
- 1x Febi Nut (43739)
£60.71
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.714 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.71
Important compatibility info
| Paired article numbers | 179134 |
| Weight | 1.976 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 30 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.71
Important compatibility info
| Type | Repait Kit, spring bearing frame |
| Weight | 0.9005 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Repait Kit, spring bearing frame |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, leaf spring (35615)
- 1x Febi Shaft Seal (44580)
- 6x Febi Nut (18328)
- 1x Febi Grease Nipple (01096)
- 1x Febi Seal Ring, wheel hub (44681)
£60.70
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 48.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Function | Brake Disc |
| Surface | Coated |
| Minimum thickness | 23 mm |
| Brake Disc Thickness | 25 mm |
| Weight | 8.53 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.69
Important compatibility info
| Weight | 1.400 kg |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 205 240 03 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.69
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 141 |
| Function | Timing Belt Kit |
| Weight | 0.63 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (37285)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
- 1x Febi Tensioner Pulley, timing belt (39101)
£60.69
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm. 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.400 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 399 mm |
| Max. Length | 399 mm |
| Min. Length | 268 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.69
Important compatibility info
| Height | 159 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Pipe Diameter | 10 mm |
| Outer diameter | 99 mm |
| Filter type | with water drain screw, with water separator, with filter heating |
| Weight | 0.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.67
Important compatibility info
| Brake Disc Thickness | 24 mm |
| Outer diameter | 320 mm |
| Thickness | 51 mm |
| Minimum thickness | 21.4 mm |
| Centering Diameter | 67 mm |
| Rotor Style | Internally Vented |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
| Number of mounting bores | 1 |
| Weight | 7.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.67
Important compatibility info
| Length | 316 mm |
| Outer diameter | 68 mm |
| Filter type | In-Line Filter, with filter heating |
| Weight | 0.32 kg |
| Pipe Diameter | 8 mm |
| Type | Fuel filter |
| Housing material | Plastic |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.66
Important compatibility info
| Type | Mounting, engine |
| Placement on Vehicle | Upper Right |
| Weight | 0.768 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 31359642 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.66
Important compatibility info
| Weight | 1.19 kg |
| Width | 19 mm |
| Number of Teeth | 127 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11130)
- 1x Febi Tensioner Pulley, timing belt (04199)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (04195)
£60.66
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Weight | 0.26 kg |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.64
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 2.000 kg |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.64
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Aluminium |
| Number of grooves | 8 |
| Number of Wings | 5 |
| Weight | 2.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.63
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023