Important compatibility info
Belts | with rounded tooth profile |
Number of Teeth | 132 |
Surface | PTFE (Polytetrafluorethylene) coated |
Function | Timing Belt |
Weight | 0.16 kg |
Width | 26 mm |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Length | 87 mm |
Inner diameter 2 | 66 mm |
Inner diameter 1 | 20 mm |
Function | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Weight | 0.279 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100211)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Inner diameter | 34 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Gasket outer diameter | 103.5 mm |
Gasket inner diameter | 95.5 mm |
Weight | 0.092 kg |
Type | Oil Filter |
Height | 59 mm |
Outer diameter | 90 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Weight | 1.28 kg |
Additional Information | with gasket/seal |
Number of mounting bores | 9 |
Type | Housing, water pump |
Function | Housing, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.630 kg |
Outer diameter | 65 mm |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 21 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Material | Steel |
Outer diameter | 32 mm |
Thickness | 36 mm |
Spanner Size | 17, 19 |
Surface | Zink flake coated |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10 |
Wheel Fastening | Flat Seat |
Function | Wheel Nut |
Weight | 0.300 kg |
Internal Thread Size | M14 x 1,5 |
Type | Wheel Nut |
Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.216 kg |
Placement on Vehicle | both sides |
Length | 460 mm |
Housing Diameter | 18 mm |
Eject Force | 100 N |
Stroke | 164 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, rear window |
Housing length | 266.5 mm |
Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 116.8 mm |
Width | 63.1 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.1 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 274 mm |
Thickness | 10.9 mm |
Brake Disc Thickness | 11 mm |
Minimum thickness | 9.5 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 52.3 mm |
Surface | Oiled |
Function | Brake Disc |
Weight | 7.0 kg |
Rotor Style | Solid |
Additional Information 2 | with ABS sensor ring, with grease cap |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.430 kg |
Placement on Vehicle | Left Rear |
Length | 1695 mm |
Paired article numbers | 28736 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.660 kg |
Material | Cast Aluminium |
Number of Wings | 10 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Additional Information | with gasket/seal |
Seal Material | Paper |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 155 mm. 280 mm |
Thickness | 155 mm. 310 mm |
Function | Bellow, air suspension |
Weight | 8.5 kg |
Port / Connector type | Voss 232 |
External Thread Size | M16 x 1,5, M24 x 1,5 |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bellow Kit, steering |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 55 mm |
Weight | 0.060 kg |
Placement on Vehicle | Front Axle |
Length | 181 mm |
Material | Thermoplastic polyester elastomer |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.02 kg |
Number of Connectors / Ports | 2 |
Function | Switch, reverse light |
Colour | Grey |
Spanner Size | 22 |
Type | Switch, reverse light |
for OE number | 2257.59 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.051 kg |
Outer diameter | 17.8 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, camshaft position / Sensor, crankshaft pulse |
Function | Sensor, camshaft position / Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with Temperature Switch |
Weight | 1.64 kg |
Type | Thermostat Housing |
Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Placement on Vehicle | Rear Axle |
Pipe Diameter | 65 mm. 76 mm |
Max. Length | 719 mm |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Weight | 5.7 kg |
Piston conrod diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M16 x 1,5 |
Min. Length | 423 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Placement on Vehicle | Rear Axle |
Length | 1141 mm |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.6 kg |
Placement on Vehicle | Front Axle |
Length | 362 mm |
Outer diameter | 140 mm |
Function | Suspension Spring |
Wire Diameter | 12.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.450 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 38970 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (38969)
- 1x Febi Inner Tie Rod (36505)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023