Important compatibility info
Thread Size | M22x1,5 |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 81.5 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Wheel Sided Joint Diameter | 82.0 mm |
Min. Length | 595 mm |
External Teeth, Diff.Side | 34 |
External Teeth, Wheel Side | 26 |
Weight | 5.744 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.160 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 12439 |
Cone Size | 18 mm |
Pipe Diameter | 32 mm |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Weight | 5.167 kg |
Placement on Vehicle | Front Axle |
Length | 1352 mm |
Additional Information 2 | with crown nut |
External Thread Size | M14 x 1,5, M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Weight | 1.245 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 28368 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 78 mm |
External Teeth, Wheel Side | 36 |
Weight | 4.880 kg |
Wheel Sided Joint Diameter | 81 mm |
Min. Length | 556 mm |
Additional Information | with grease |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 94 mm |
Bore Diameter | 8.5 mm |
Number of mounting bores | 6 |
Function | Drive Shaft |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 25 |
Weight | 6.381 kg |
External Teeth, Diff.Side | 39 |
Min. Length | 642 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 82 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Outer diameter | 75 mm |
Weight | 1.201 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 245 mm |
Number of Teeth | 26 |
Length | 296 mm |
Outer diameter | 98 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Weight | 3.633 kg |
Paired article numbers | 179425 |
Placement on Vehicle | Left Front |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.846 kg |
Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
Width | 41 mm |
Outer diameter | 115 mm |
Inner diameter | 60 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Additional Information | with counter nut |
Weight | 0.87 kg |
Placement on Vehicle | Front Axle Left |
Length | 151 mm |
Thickness | 111 mm |
Spanner Size | 22 |
Paired article numbers | 41084 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Steering arm type | Control Arm, Four-Point Link (CV) |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Cone Size | 17 mm |
Paired article numbers | 175414 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.724 kg |
Internal Thread Size | M12 x 1,5 |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 45 mm |
Thickness | 67 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 32 mm |
Pipe Diameter | 36 mm |
Placement on Vehicle | Rear Axle |
Length | 390 mm |
Rod/Strut | Coupling Rod |
Weight | 4.2 kg |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.049 kg |
Colour | Orange |
Placement on Vehicle | Right Exterior Mirror |
Length | 58 mm |
Height | 64 mm |
Width | 90 mm |
Paired article numbers | 107877 |
Type | Auxiliary Direction Indicator |
Function | Auxiliary Direction Indicator |
Extra Description | febi Plus |
Light Design | Halogen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
External Teeth, Wheel Side | 36 |
Weight | 5.000 kg |
Min. Length | 546 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 107.7 mm |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.49 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Placement on Vehicle | transmission sided |
Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
Outer diameter | 180 mm |
Thickness | 12 mm |
Inner diameter | 154 mm |
Function | Shaft Seal, crankshaft |
Additional Information 2 | with mounting sleeve |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Pipe Diameter | 41 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12 mm |
Mounting points diameter | 14 mm |
Min. Length | 221 mm |
Max. Length | 336 mm |
Weight | 1.7 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Front |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
External Teeth, Wheel Side | 25 |
Thread Size | M24x1,5 |
Wheel Sided Joint Diameter | 79 mm |
Min. Length | 944 mm |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Diff.Side | 26 |
Weight | 7.564 kg |
Transmission-side joint diameter | 81.5 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 1.5 kg |
Paired article numbers | 175794 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023